RS 137-159, 137-193, 137-187, 137-200, 137-165 Instruction Manual

...
Instruction Manual
Digital & Variable Heat Guns
DE FR IT ES
EN
RS Stock No. 137-159
137-165 137-193 137-187 137-200 137-216
United Kingdon:
Tel: 01536 201234 Fax: 01536 405678 rswww.com
Deutschland:
RS Componenets GmbH Hessenring 13b 64546 Morfelden-Walldorf
telefon: 06105/401-0 Fax: 06105/401-100 www.rsonline.de
This instrument is warranted to the original purchaser against defects in material and workmanship for one year from the date of purchase.
During this warranty period, RS Components will, at its option, replace or repair the defective unit, subject to verication of the defect or
its malfunction. This warranty does not cover disposable batteries, fuses or damage from abuse, neglect, accident or unauthorized repair, alteration, contamination or abnormal conditions of operation or handling.
Any implied warranties arising out of the sale of this product, including but not limited to implied warranties of merchantability and tness
for a particular purpose, are limited to the above. RS Components shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim or claims for such damage, expense or economic loss. Some states or countries laws vary, so the above limitations or exclusions may not apply to you. For full terms and conditions, please refer to the latest RS catalogue.
Espana:
RS Amidata SA parque Empresarial Urbis Center
Avda de Europa 19 - Edicio 3
28224 Pozuelo de Alarcon Madrid Espana
Tel: (34) 902 10 07 11 www.amidata.es
Italia:
RS Components SpA Via M.V.De Vizzi 93/95 20099 Cinisello Balsamo (Mi)
Tel: +39 02 66058.1 Fax: +39 02 66058.051 www.rs-components.it
Francais:
Radiospares Componenets SNC Rue Norman KIng BP453 F-60031 Beauvais Cedex France
Tel: (33) 3 44 10 1500 Fax: (33) 3 44 10 1507 http://www.radiospares.fr
© Copyright 2009, LINEARTOOLS, E&OE
Digital Heat Guns / UK
1. Digital Display Panel 2 Flashing Temperature Indicating Arrows 3 Temperature Setting Toggle
4 4 Position Power / Airow Switch 5 3 Marked Airow Positions 6 Metal Airow Nozzle
7 Sleeve Guard (detachable) 8 Vertical Stand Surface
9 4 Position Power / Airow Switch
10 Power Cable 11 Soft grip Handle
Switch Position
O
I
II
III
2
Airow l/min
Off
300
300
550
Temperature Deg. “C”
Off
50 Constant
60-600
60-600
06/05/2009 Version No. 1
Digital Heat Guns / UK
Operating Instructions
Select switch position I, II or III for the required airow and temperature output.
For positions II and III the temperature can be set by using the Temperature Setting Toggle (3)
Press the Toggle on the right hand side (+) to increase the temperature in 10 degree steps.
The digital display will initially indicate the target temperature and will then revert to the
current output temperature at the nozzle. Indicating arrows (2) will ash during the build up
and will stop when the target temperature is reached.
The nozzle temperature can also be reduced in 10-degree steps by pressing the left hand
side of the toggle (-); the same ashing indicators will be seen until the new target
temperature is achieved.
To turn the Heat Gun off it is recommended that it should be set to switch position I if it has been used in switch position II or III at the higher operating temperatures. This allows the
element to cool prior to the nal switching off and will prolong the life of the heating element.
To allow the Heat Gun to cool correctly, place in its self-standing vertical position on a at,
non-slip, stable surface away from children and people who may be unaware it could be hot
Code
137-165
137-193
137-159
Code
137-165
137-193
137-159
06/05/2009 Version No. 1
Digital Heat Gun
Digital Heat Gun
Digital Heat Gun
Airow
L/min
300-550
300-550
300-550
Description
Power
W
2000
1500
2000
Voltage
240 V
110 V
230 V
BS 1363/A - 3 plug 13 A -250 V
EN 60309-3 plug 16 A–4 h 100–130 V
Schuko - 2 plug 16A - 250 V
Hz
50
50
50
Plug
Temperature
Range
50-600
50-600
50-600
Weight
750g
750g
750g
3
Variable Heat Guns / UK
1. Rotating Temperature Setting Ring 2 “Arrow Head” Temperature Setting Position 3 “L” Low Temperature Setting 4 “H” High Temperature Setting
5 4 Position Power / Airow Switch 6 Metal Airow Nozzle
7 Heat Guard (detachable) 8 Vertical Stand Surface
9 4 Position Power / Airow Switch
10 Power Cable
Switch Position
O
I
II
III
4
Airow l/min
Off
300
300
550
Temperature Deg. “C”
Off
60 Constant
60-600
60-600
06/05/2009 Version No. 1
Variable Heat Guns / UK
Operating Instructions
Select switch position I, II or III for the required airow and temperature output.
For positions II and III the temperature can be set by rotating the Temperature Setting Ring (1)
With “L” in the vertical position adjacent to the “Arrow Head” the output temperature will be at its lowest ie. 60 degrees “C”
Rotate the Temperature Setting Ring (1) in a clockwise direction to increase the temperature.
Maximum temperature of 600 degrees “C” is achieved by fully rotating the Temperature Setting Ring in a clockwise direction until “H” is adjacent to the “Arrow Head”
To turn the Heat Gun off it is recommended that it should be set to switch position I if it has been used in switch position II or III at the higher operating temperatures. This allows the
element to cool prior to the nal switching off and will prolong the life of the heating element.
To allow the Heat Gun to cool correctly, place in its free-standing vertical position on a at,
non-slip, stable surface away from children and people who may be unaware it could be hot
Code
137-200
137-216
137-187
Code
137-200
137-216
137-187
06/05/2009 Version No. 1
Variable Heat Gun
Variable Heat Gun
Variable Heat Gun
Airow
L/min
300-550
300-550
300-550
Description
Power
W
2000
1500
2000
Voltage
240 V
110 V
230 V
BS 1363/A - 3 plug 13 A -250 V
EN 60309-3 plug 16 A–4 h 100–130 V
Schuko - 2 plug 16A - 250 V
Hz
50
50
50
Plug
Temperature
Range
60-600
60-600
60-600
Weight
750g
750g
750g
5
Heat Gun Accessories / UK
1 - Reduction Nozzle 22mm diameter 2 - Window Nozzle 65mm long x 15mm wide 3 - Surface Nozzle 75mm wide
4 - Reector Nozzle 70mm wide
5 - Triangular Scraper: Blade 3 sides 60mm long, overall length 225mm
1
5
Application
Paint Stripping
Electric Cable Shrink Tubing
Forming PVC Tubing
2
3
4
Nozzle Type
1, 2 or 3
4
4
Possible
Heat Range
500-600C
250-300C
250-300C
Barbeque Lighting
Water Pipe Thawing
Plastic Sheet Joining
6
Not required or 1
Not required
3
500-600C
250-300C
300-400C
06/05/2009 Version No. 1
Heat Gun Safety Information / UK
Please read and follow these instructions when using the Heat Gun. Failure to follow these instructions may result in the tool becoming an unnecessary source of danger and may cause personal injury.
The Heat Gun should not be used when the tool is wet or damp or in a wet or damp atmosphere
Do not use the tool in the rain
Do not use the tool in the presence of an explosive atmosphere
Take care when using the tool near ammable materials and ensure that hot air is not
directed for too long in the same spot.
Ensure that you are aware of ammable materials, which may be out of sight and may be
affected indirectly by conducted heat.
Plastic, Paint, Varnish and similar materials can emit toxic gases when heated. Ensure that the area is well ventilated when working with these materials and suitable protective equipment is worn.
Do not allow the power cord to come in contact with heat, oil, corrosive materials or sharp edges.
Do not unplug or carry the tool by its power cord.
When using the Heat Gun in its self-standing vertical position, ensure that it is sitting on a
at; non-slip, clean, stable surface and the power cable cannot be accidentally snagged.
Accessories should only be tted to the Heat Gun nozzle when the tool is cold.
Take care when changing these accessories.
Following use allow the tool to cool completely as per the instructions before replacing in its case.
Store the tool in a dry secure location and out of the reach of children.
Please keep these Instructions and Safety Warnings in a safe place
06/05/2009 Version No. 1
7
Digitale Heißluftpistolen / DE
1. Digitalanzeige 2 Blinkende Pfeile zur Temperaturanzeige 3 Kippschalter zur Temperatureinstellung 4 Leistungs-/Luftstrom-Schalter mit 4 Positionen 5 3 markierte Luftstrom-Positionen 6 Luftstrom-Metalldüse 7 Griffschutz (abnehmbar)
8 Vertikale Standäche
9 Leistungs-/Luftstrom-Schalter mit 4 Positionen 10 Netzkabel 11 Weicher Griff
Schalterposition
O
I
II
III
8
Luftstrom l/min
Aus
300
300
550
Temperatur Grad „C”
Aus
50 konstant
60-600
60-600
06/05/2009 Version No. 1
Digitale Heißluftpistolen / DE
Bedienungsanleitung
Wählen Sie Schalterposition I, II oder III, um Luftstrom und Temperaturabgabe nach Wunsch
einzustellen.
Bei den Positionen II und III kann die Temperatur mit dem Kippschalter zur Temperatureinstel­lung (3) eingestellt werden.
Drücken Sie auf die rechte Seite des Kippschalters (+), um die Temperatur in Schritten zu 10 Grad zu erhöhen.
Die Digitalanzeige gibt anfänglich die Zieltemperatur an und kehrt danach zur Anzeige der
C
aktuellen Ausgabetemperatur an der Düse zurück. Die Anzeigepfeile (2) blinken, während die Temperatur steigt. Sobald die Zieltemperatur erreicht wird, hört das Blinken auf.
Die Düsentemperatur kann in Schritten zu 10 Grad gesenkt werden, indem auf die linke Seite des Kippschalters gedrückt wird (-). Auch hier blinken dieselben Anzeigepfeile, bis die neue
Zieltemperatur erreicht wird.
Zum Ausschalten der Heißluftpistole wird empfohlen, dass sie auf Schalterposition I
eingestellt wird, wenn sie in Schalterposition II oder III bei den höheren Betriebs-temperaturen verwendet wurde. Dadurch kann das Element abkühlen, bevor es
endgültig ausgeschaltet wird, was die Lebensdauer des Heizelements verlängert.
Damit die Heißluftpistole richtig abkühlen kann, stellen Sie diese in der vertikalen Position ab, in der sie ihre Ausrichtung automatisch beibehält. Die Oberäche muss eben, rutschfest und stabil sein. Zudem muss sichergestellt werden, dass weder Kinder noch Personen Zugang zur Heißluftpistole haben, die sich möglicherweise nicht über die hohen
Temperaturen im Klaren sind.
Code
Beschreibung
Spannung
Hz
Temperat-urbereich
137-165
137-193
137-159
Code
137-165
137-193
137-159
06/05/2009 Version No. 1
Digitale Heißluftpistole
Digitale Heißluftpistole
Digitale Heißluftpistole
Luftd-urchsatz
l/min
300-550
300-550
300-550
Leist-ung
W
2000
1500
2000
240 V
110 V
230 V
BS 1363/A - 3 polig 13 A -250 V
EN 60309-3 polig 16 A–4 h 100–130 V
Schuko - 2 polig 16A - 250 V
50
50
50
Stecker
50-600
50-600
50-600
Gewicht
750g
750g
750g
9
Einstellbare Heißluftpistole / DE
1. Drehring zur Temperatureinstellung 2 Pfeilspitzen-Temperatureinstellposition 3 “L”-Niedertemperatureinstellung 4 “H”-Hochtemperatureinstellung 5 Leistungs-/Luftstrom-Schalter mit 4 Positionen 6 Luftstrom-Metalldüse 7 Hitzeschutz (abnehmbar)
8 Vertikale Standäche
9 Leistungs-/Luftstrom-Schalter mit 4 Positionen 10 Netzkabel
10
Schalterposition
O
I
II
III
Luftstrom l/min
Aus
300
300
550
Temperatur Grad “C”
Aus
60 konstant
60-600
60-600
06/05/2009 Version No. 1
Loading...
+ 21 hidden pages