VIENNA C OLD D ISPLAY
MODEL # VICD-SQ INS SQUARED GLASS
SPECIFICATIONS
The Vienna Series VICD-SQ INS Slide-in or Drop-in is
a full-service refrigerated display merchandiser, featuring
a squared glass profile with insulated glass front, top and
side panels. Unit is available in choice of two heights with
hinged rear see-through access doors. When being used
as a “slide-in” please advise if counter height is 34” or 36”.
Optional 6” or 8” stainless steel adjustable legs or casters
are available for slide-in style models.
31 1/2" 44 3/8" 57 1/8" 69 7/8”
27 3/8"
21 1/4" 28" 34 5/8"
SLIDE-IN UNIT SHOWN WITH OPTIONAL
REAR AIR VENTILATION KIT
Squared Glass Profile
304 Stainless Steel Exterior
Insulated Glass Front, Top and Side Panels
Hinged Rear See-Through Access Doors
Easy Removable Deck Pans for Cleaning
Programmable Digital Refrigeration Controller
Self-Contained Refrigeration with Integrated
Compressor Housing
Fan Assisted Cooling System
Lift-Up Evaporator
Tilt-Out Front Glass
ETL Listed in Accordance with UL 471
and NSF 7 Standards
Environmentally Safe Refrigerant
Floor Drain Required
MODEL L D H HP VOLT AMPS PLUG WT REFRIG. DROP IN C/O SIZE SLIDE IN C/O SIZE
VICD2-20-R-SQ-SC INS 31 1/2 27 3/8 21 1/4 1/4 115 4.8 5-15P 462 134A 29 1/4 x 26 3/8 29 1/4 x VARIES
VICD3-20-R-SQ-SC INS 44 3/8 27 3/8 21 1/4 1/3 115 5.7 5-15P 506 134A 42 1/8 x 26 3/8 42 1/8 x VARIES
VICD4-20-R-SQ-SC INS 57 1/8 27 3/8 21 1/4 1/3 115 5.9 5-15P 572 134A 54 7/8 x 26 3/8 54 7/8 x VARIES
VICD5-20-R-SQ-SC INS 69 7/8 27 3/8 21 1/4 3/8 115 7.5 5-15P 638 134A 67 5/8 x 26 3/8 67 5/8 x VARIES
VICD2-27-R-SQ-SC INS 31 1/2 27 3/8 28 1/3 115 5.7 5-15P 484 134A 29 1/4 x 26 3/8 29 1/4 x VARIES
VICD3-27-R-SQ-SC INS 44 3/8 27 3/8 28 1/3 115 6.0 5-15P 528 134A 42 1/8 x 26 3/8 42 1/8 x VARIES
VICD4-27-R-SQ-SC INS 57 1/8 27 3/8 28 3/8 115 7.8 5-15P 594 134A 54 7/8 x 26 3/8 54 7/8 x VARIES
VICD5-27-R-SQ-SC INS 69 7/8 27 3/8 28 1/2 115 9.2 5-15P 660 134A 67 5/8 x 26 3/8 67 5/8 x VARIES
VICD2-34-R-SQ-SC INS 31 1/2 27 3/8 34 5/8 3/8 115 7.3 5-15P 528 134A 29 1/4 x 26 3/8 29 1/4 x VARIES
VICD3-34-R-SQ-SC INS 44 3/8 27 3/8 34 5/8 3/8 115 7.8 5-15P 572 134A 42 1/8 x 26 3/8 42 1/8 x VARIES
VICD4-34-R-SQ-SC INS 57 1/8 27 3/8 34 5/8 1/2 115 9.4 5-15P 638 134A 54 7/8 x 26 3/8 54 7/8 x VARIES
VICD5-34-R-SQ-SC INS 69 7/8 27 3/8 34 5/8 1/2+ 115/230 6.0 14-20P 704 134A 67 5/8 x 26 3/8 67 5/8 x VARIES
Remote Refrigeration
Integrations Modular Counter (Consult Factory)
Adjustable Casters (Slide-In Units, Consult Factory for Sizes)
Adjustable Legs (Slide-In Units, Consult Factory for Sizes)
Rear Air Ventilation Kit
5 Year Compressor Warranty
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
v8.12
V
IENNA
C
OLD
D
ISPLAY
TOLL FREE: 800-525-3692
MODEL # VICD-SQ INS SQUARED GLASS
VICD2-(A)-R-SQ-SC INS VICD3-(A)-R-SQ-SC INS VICD4-(A)-R-SQ-SC INS VICD5-(A)-R-SQ-SC INS
VICD(A)-20-R-SQ-SC INS VICD(A)-27-R-SQ-SC INS VICD(A)-34-R-SQ-SC INS
UNITS SHOWN WITH “REAR AIR BREATHING” OPTION
LARGEST DIMENSION REPRESENTS OUTSIDE FLANGE
1. A 1"diameter drain is provided. The drain MUST be connected to a floor drain
or storage container AT TIME OF INSTALLATION.
2. Front and Rear ventilation louvers, each at least 25" W x 20" H, MUST be provided
in the cabinet or counter and located so to provide full ventilation for the condensing unit.
3. The VICD-SQ INS merchandiser is designed for use in locations where temperatures
and humidity do not exceed 75 degrees and 55% R.H. Locate away from direct sunlight,
rapid air currents and extreme temperature changes. Exposure to air currents from ceiling fans,
air conditioners, ovens, etc. will disrupt the cases air current and refrigeration zone within.
Any adverse field conditions stated above will void warranty.
RPI in line with it's policy to continually improve it's product reserves the right to change
materials and specifications without notice.
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
v8.12