RPI Industries VICD2-20-R-SQ-SC FD User Manual

VIENNA COLD D ISPLAY

MODEL # VICD-SQ FD SQUARED GLASS w/ FLIP-UP DOORS

SPECIFICATIONS

The Vienna Series VICD-SQ FD Slide-in or Drop-in is a
refrigerated display merchandiser, featuring insulated
glass top, side panels and squared front profile with "flip-up"
compartment access doors for self-serve application.
Unit is available in choice of three heights with hinged rear
see-through access doors. When being used as a “slide-in”
please advise if counter height is 34” or 36”. Optional
6” or 8” stainless steel adjustable legs or casters are
available for slide-in style models.

31 1/2" 44 3/8" 57 1/8" 69 7/8"

27 3/8"

21 1/4" 28" 34 5/8"

SLIDE-IN UNIT SHOWN WITH OPTIONAL

REAR AIR VENTILATION KIT

Squared Glass Profile
304 Stainless Steel Exterior
Insulated Glass Top and Side Panels
Acrylic Glass Front Flip-Up Access Doors
Hinged Rear See-Through Access Doors
Easy Removable Deck Pans for Cleaning
Programmable Digital Refrigeration Controller
Self-Contained Refrigeration with Integrated
Compressor Housing
Fan Assisted Cooling System
Lift-Up Evaporator
ETL Listed in Accordance with UL 471
and NSF 7 Standards
Environmentally Safe Refrigerant
Floor Drain Required

MODEL L D H HP VOLT AMPS PLUG WT REFRIG. DROP IN C/O SIZE SLIDE IN C/O SIZE

VICD2-20-R-SQ-SC FD 31 1/2 27 3/8 21 1/4 1/4 115 4.8 5-15P 462 134A 29 1/4 x 26 3/8 29 1/4 x VARIES
VICD3-20-R-SQ-SC FD 44 3/8 27 3/8 21 1/4 1/3 115 5.7 5-15P 506 134A 42 1/8 x 26 3/8 42 1/8 x VARIES

VICD4-20-R-SQ-SC FD 57 1/8 27 3/8 21 1/4 1/3 115 5.9 5-15P 572 134A 54 7/8 x 26 3/8 54 7/8 x VARIES
VICD5-20-R-SQ-SC FD 69 7/8 27 3/8 21 1/4 3/8 115 7.5 5-15P 638 134A 67 5/8 x 26 3/8 67 5/8 x VARIES
VICD2-27-R-SQ-SC FD 31 1/2 27 3/8 28 1/3 115 5.7 5-15P 484 134A 29 1/4 x 26 3/8 29 1/4 x VARIES
VICD3-27-R-SQ-SC FD 44 3/8 27 3/8 28 1/3 115 6.0 5-15P 528 134A 42 1/8 x 26 3/8 42 1/8 x VARIES
VICD4-27-R-SQ-SC FD 57 1/8 27 3/8 28 3/8 115 7.8 5-15P 594 134A 54 7/8 x 26 3/8 54 7/8 x VARIES
VICD5-27-R-SQ-SC FD 69 7/8 27 3/8 28 1/2 115 9.2 5-15P 660 134A 67 5/8 x 26 3/8 67 5/8 x VARIES
VICD2-34-R-SQ-SC FD 31 1/2 27 3/8 34 5/8 3/8 115 7.3 5-15P 528 134A 29 1/4 x 26 3/8 29 1/4 x VARIES
VICD3-34-R-SQ-SC FD 44 3/8 27 3/8 34 5/8 3/8 115 7.8 5-15P 572 134A 42 1/8 x 26 3/8 42 1/8 x VARIES
VICD4-34-R-SQ-SC FD 57 1/8 27 3/8 34 5/8 1/2 115 9.4 5-15P 638 134A 54 7/8 x 26 3/8 54 7/8 x VARIES
VICD5-34-R-SQ-SC FD 69 7/8 27 3/8 34 5/8 1/2+ 115/230 6.0 14-20P 704 134A 67 5/8 x 26 3/8 67 5/8 x VARIES

Remote Refrigeration
Integrated Top Air Duct
Integrations Modular Counter (Consult Factory)
Adjustable Casters (Slide-In Units, Consult Factory for Sizes)
Adjustable Legs (Slide-In Units, Consult Factory for Sizes)
Rear Air Ventilation Kit
5 Year Compressor Warranty

CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: [phone] www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055

v8.12

V

IENNA

C

OLD

D

ISPLAY

TOLL FREE: 800-525-3692

MODEL # VICD-SQ FD SQUARED GLASS w/ FLIP-UP DOORS

VICD2-(A)-R-SQ-SC FD VICD3-(A)-R-SQ-SC FD VICD4-(A)-R-SQ-SC FD VICD5-(A)-R-SQ-SC FD

VICD(A)-20-R-SQ-SC FD VICD(A)-27-R-SQ-SC FD VICD(A)-34-R-SQ-SC FD

UNITS SHOWN WITH “REAR AIR BREATHING” OPTION

LARGEST DIMENSION REPRESENTS OUTSIDE FLANGE

1. A 1"diameter drain is provided. The drain MUST be connected to a floor drain
or storage container AT TIME OF INSTALLATION.

2. Front and Rear ventilation louvers, each at least 25" W x 20" H, MUST be provided
in the cabinet or counter and located so to provide full ventilation for the condensing unit.

3. The VICD-SQ FD merchandiser is designed for use in locations where temperatures
and humidity do not exceed 75 degrees and 55% R.H. Locate away form direct sunlight,
rapid air currents and extreme temperature changes. Exposure to air currents from ceiling fans,
air conditioners, ovens, etc. will disrupt the cases air current and refrigeration zone within.
Any adverse field conditions stated above will void warranty.

RPI in line with it's policy to continually improve it's product reserves the right to change
materials and specifications without notice.

CALL TOLL FREE: 800-525-3692 (609-714-2330)

FAX: [phone] www.rpiindustries.com

220 ROUTE 70, MEDFORD, NJ 08055

v8.12