RPI Industries VICD2-20-R-SL-SC User Manual
V
IENNA
C
OLD
D
ISPLAY
PROJECT:
ITEM: QUANTITY:
MODEL # VICD-SL SLANTED GLASS
SPECIFICATIONS
The VICD-SL Vienna Series drop-in is a refrigerated full
service display merchandiser, featuring slanted front
glass and side panels. Unit is available in choice of three
heights with rear see through doors.
Available depths:■■27 3/8"
Available
Available lengths:
(above counter) heights:
31 1/2" ■■44 1/4" ■■57 1/8"■■69 7/8"
■■
STANDARD FEATURES
■
Solid Front Tempered Glass
■
304 Stainless Interior
■
Programmable Refrigeration Controller
■
Fully Automatic Hot Gas Defrost
■
Forced Air Cooling System
■
Self-Contained Refrigeration System
with Pull Out Compressor Housing
■
Lift Up Evaporator
■
Removable Air flow Pans for Cleaning
■
Hinged Rear See Through Access Doors
■
Easily Removable Side Glass Panels
■
Tilt Out Front Glass
■
Environmentally Safe Refrigerant
20 7/8" ■■27 5/8" ■■34 1/4"
■■
OPTIONAL FEATURES
■■
Remote Refrigeration (Hot Gas Defrost Not Available)
■■
Flip Up Compartment Doors
■■
5 Year Compressor Warranty
■■
Rear Air Ventilation Kit
■■
Integration Modular Counters (Consult Factory)
WHEN ORDERING SPECIFY:
Application: _______________________________________
Refrigeration Type: __________________________________
Shown with optional counter.
NNSSFF
®
ABOVE
MODEL LWH COMP HP VOLT AMPS NEMA PLUG WT CUT-OUT SIZE
VICD2-20-R-SL-SC 31 1/2 27 3/8 20 7/8 1/4 115 4.7 5-15P 339 29 7/8 x 26 3/8
VICD3-20-R-SL-SC 44 1/4 27 3/8 20 7/8 1/4 115 5.0 5-15P 403 42 3/4 x 26 3/8
VICD4-20-R-SL-SC 57 1/8 27 3/8 20 7/8 1/3 115 6.3 5-15P 470 55 1/2 x 26 3/8
VICD5-20-R-SL-SC 69 7/8 27 3/8 20 7/8 3/8 115 7.9 5-15P 537 68 1/4 x 26 3/8
VICD2-27-R-SL-SC 31 1/2 27 3/8 27 5/8 1/4 115 5.0 5-15P 356 29 7/8 x 26 3/8
VICD3-27-R-SL-SC 44 1/4 27 3/8 27 5/8 1/3 115 6.1 5-15P 426 42 3/4 x 26 3/8
VICD4-27-R-SL-SC 57 1/8 27 3/8 27 5/8 3/8 115 7.9 5-15P 500 55 1/2 x 26 3/8
VICD5-27-R-SL-SC 69 7/8 27 3/8 27 5/8 1/2 115 8.9 5-15P 573 68 1/4 x 26 3/8
VICD2-34-R-SL-SC 31 1/2 27 3/8 34 1/4 1/3 115 6.0 5-15P 373 29 7/8 x 26 3/8
VICD3-34-R-SL-SC 44 1/4 27 3/8 34 1/4 3/8 115 7.7 5-15P 449 42 3/4 x 26 3/8
VICD4-34-R-SL-SC 57 1/8 27 3/8 34 1/4 1/2 115 8.9 5-15P 530 55 1/2 x 26 3/8
VICD5-34-R-SL-SC 69 7/8 27 3/8 34 1/4 1/2 115/230 7.4 14-20P 609 68 1/4 x 26 3/8
COUNTER
17.
V
IENNA
MODEL # VICD-SL SLANTED GLASS
VICD-20-R-SL-SC VICD-27-R-SL-SC VICD-34-R-SL-SC
C
OLD
D
ISPLAY
18.
LARGEST DIMENSION REPRESENTS OUTSIDE FLANGE
1. A 1"diameter drain is provided. The drain MUST be connected to a floor drain or storage container
AT TIME OF INSTALLATION.
2. Front and Rear ventilation louvers, each at least 25" W x 20" H, MUST be provided in the cabinet
or counter and located so to provide full ventilation for the condensing unit.
3. The VICD-SL merchandiser is designed for use in locations where temperatures
and humidity do not exceed 75 degrees and 55% R.H. Any adverse conditions will affect warranty.
Locate away form direct sunlight, rapid air currents and extreme temperature changes. Exposure
to air currents from ceiling fans, air conditioners, ovens, etc. will disrupt the cases air current and
refrigeration zone within.
RPI in line with it's policy to continually improve it's product reserves the right
to change materials and specifications without notice.
Loading...