RPI Industries VIAP AT User Manual

Page 1
VIENNA AIR PAN W/AIR TOWER
MODEL # VIAP AT
SPECIFICATIONS
The VIAP-AT is a drop-in air pan with an air tower which provides higher air coverage for taller product. It is cooled by circulating a curtain of refrigerated air over the product in the display area to enable precise temperature control and maximum cold transfer to the food product.
ITEM: _______ QUANTITY: _______
28"
4" *
30 1/2"
43 3/8"
STANDARD FEATURES
304 Stainless Steel Exterior
Adjustable Deck Pan to Convert
to Slanted Display
Easy Removable Deck Pans for Cleaning Adapter Bars for Standard Full-Size Pans (Pans Not Included)
Programmable Digital Refrigeration Controller
Self-Contained Refrigeration with
Pull Out Compressor Housing
Forced Air Cooling System
Lift Up Evaporator
Environmentally Safe Refrigerant
56 1/8"
68 7/8"
OPTIONAL FEATURES
Integrations Modular Counter (Consult Factory)
Sneeze Guards (Consult Factory)
Rear Air Ventilation Kit
Front Air Ventilation Kit for Units Against Wall
Remote Refrigeration
5 Year Compressor Warranty
MODEL LDH* PANS COMP HP VOLT AMP NEMA PLUG WT CUT-OUT SIZE REFRIG
VIAP-2-0-R-SC-AT 30 1/2 28 42 1/4 115V 3.9 5-15P 191 28 3/4 x 26 1/4 134A VIAP-3-0-R-SC-AT 43 3/8 28 43 1/3 115V 4.7 5-15P 240 41 5/8 x 26 1/4 134A VIAP-4-0-R-SC-AT 56 1/8 28 44 3/8 115V 6.1 5-15P 277 54 3/8 x 26 1/4 134A VIAP-5-0-R-SC-AT 68 7/8 28 45 1/2 115V 6.9 5-15P 362 67 1/8 x 26 1/4 134A
*Height is the air tower above the counter.
PLEASE NOTE: This model does not include a surrounding flange. Must be supported from bottom. Contact factory for cut out and installation information.
Page 2
VIENNA AIR PAN W/AIR TOWER
MODEL # VIAP AT
VIAP-2-0-R-SC-AT
VIAP-3-0-R-SC-AT
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
Page 3
TOLL FREE: 800-525-3692
VIAP-4-0-R-SC-AT
VIAP-5-0-R-SC-AT
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
Page 4
VIENNA AIR PAN W/AIR TOWER
MODEL # VIAP AT
TOLL FREE: 800-525-3692
Electrical & Plumbing locations
NNSSFF
®
Conforms to UL Standard 471,
and NSF Standard 7; Certified
To CSA Standard C22.2 No.120
1. A 1” diameter drain is provided. The drain MUST be run to a floor drain AT TIME OF INSTALLATION.
2. Front and Rear ventilation louvers, each at least 25” W x 20” H, MUST be provided in the cabinet or counter and located so to provide full ventilation for the condensing unit. Refrigeration System is designed so air will flow rear to front. Unobstructed air flow must be maintained to ensure unit performance and maintain warranty.
3. RPI Merchandiser is designed for use in stores where ambient temperatures and humidity do not exceed 75 Degrees Fahrenheit and 55% R.H. Locate away from direct sunlight, rapid air currents and extreme temperature changes. Exposure to air currents from ceiling fans, air conditioning diffusers, ovens, etc. will disrupt the case air curtain and refrigerated zone. Refrigerated Displays are designed to maintain pre-chilled products. Adding or loading warm products above 41 Degrees Fahrenheit can affect the temperature in the entire cabinet.
RPI in line with its policy to continually improve its products reserves the right to change materials and specifications without notice.
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
Loading...