VIENNA AIR PAN W/AIR T OWER
MODEL # VIAP AT
SPECIFICATIONS
The Vienna Series VIAP AT is a drop-in air pan with an
air tower, which provides higher air coverage for taller
product. It is cooled by circulating a curtain of
refrigerated air over the product in the display area to
enable precise temperature control and maximum cold
transfer to the food product. Evaporator features a lift-up
mechanism that allows the inner pan to be easily rinsed
clean. Unit is designed to accommodate standard
hotel / foodservice pans (to be purchased by others).
30 1/2" 43 3/8" 56 1/8” 68 7/8"
27 7/8”
29 1/8”
304 Stainless Steel Exterior
Adjustable Deck Pan to Convert
to Slanted Display
Easy Removable Deck Pans for Cleaning
Programmable Digital Refrigeration Controller
Self-Contained Refrigeration with
Pull-Out Compressor Housing
Forced Air Cooling System
Lift-Up Evaporator
ETL Listed in Accordance with UL 471
and NSF 7 Standards
Environmentally Safe Refrigerant
Floor Drain Required
MODEL L* D H** PANS HP VOLT AMP PLUG WT REFRIG. CUT-OUT SIZE
VIAP2-0-R-SC AT 30 1/2 27 7/8 29 1/8 2 1/4 115 3.9 5-15P 330 134A 28 3/4 x 26 1/4
VIAP3-0-R-SC AT 43 3/8 27 7/8 29 1/8 3 1/3 115 4.7 5-15P 363 134A 41 5/8 x 26 1/4
VIAP4-0-R-SC AT 56 1/8 27 7/8 29 1/8 4 3/8 115 6.1 5-15P 429 134A 54 3/8 x 26 1/4
VIAP5-0-R-SC AT 68 7/8 27 7/8 29 1/8 5 1/2 115 6.9 5-15P 528 134A 67 1/8 x 26 1/4
1. A 1” diameter drain is provided. The drain MUST be run to a floor drain AT TIME OF INSTALLATION.
2. Front and Rear ventilation louvers, each at least 25” W x 20” H, MUST be provided in the cabinet or counter and located so to provide full ventilation
for the condensing unit. Refrigeration System is designed so air will flow rear to front. Unobstructed air flow must be maintained to ensure unit
performance and maintain warranty.
Remote Refrigeration
Integrations Modular Counter (Consult Factory)
Sneeze Guards (Consult Factory)
Adapter Bars for Standard Full-Size Pans (Pans Not Included)
Front Air Ventilation Kit for Units Against Wall
Rear Air Ventilation Kit
5 Year Compressor Warranty
* LENGTHS INCLUDE OUTSIDE FLANGES
** 29 1/8” O.A. height, includes 4” height of the
air tower. Contact factory for cut out and installation
information.
3. RPI Merchandiser is designed for use in stores where ambient temperatures and humidity do not exceed 75 Degrees Fahrenheit and 55% R.H.
Locate away from direct sunlight, rapid air currents and extreme temperature changes. Exposure to air currents from ceiling fans, air conditioning
diffusers, ovens, etc. will disrupt the case air curtain and refrigerated zone. Refrigerated Displays are designed to maintain pre-chilled products.
Adding or loading warm products above 41 Degrees Fahrenheit can affect the temperature in the entire cabinet. Any adverse field conditions stated
above will void warranty.
RPI in line with its policy to continually improve its products reserves the right to change materials and specifications without notice.
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
v8.12
V
IENNA
MODEL # VIAP AT
A
VIAP2-0-R-SC AT VIAP3-0-R-SC AT
IR
P
AN
W/
A
T
IR
Counter Top
OWER
TOLL FREE: 800-525-3692
2 1/2” HOLE REQUIRED FOR
COOLING AND DRAINAGE LINES
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
VIAP5-0-R-SC ATVIAP4-0-R-SC AT
v8.12