RPI Industries CTPD36D User Manual
COUNTER TOP DISPLAY
MODEL # CTPD
SPECIFICATIONS
The Counter Top Display CTPD Series is a non-refrigerated
curved glass display unit designed for counter top applications.
Unit comes standard with fixed curved front glass and plexiglass
vision end panels. Optional solid end panels, interior and exterior
finishes are also available.
36” 48" 60” 72" 96"
28 1/2”
24 1/4”
Curved Glass Profile
Standard Grade Laminate Exterior
Solid End Panels
White Interior Ends
White Laminated Deck
Top Canopy Light
(2) Tempered Glass Shelves
Mirrored Rear Sliding Doors (Hinged Doors for 3’ Units)
8’ Cord and Plug
1 Year Parts and Labor Warranty
Stainless Steel Exterior Finish
#4 #6 #8
Special Laminates
Wood Veneers (Unfinished)
Wood Veneers (Stained & Sealed)
Miscellaneous Trim
Promolux Lighting (Low UV)
Energy Efficient LED Lighting
Solid End Panels with Mirrored Interior Ends
Solid End Panels with Mirrored Polished Stainless Steel
Interior Ends (#8 Finish)
Stainless Steel Laminated Deck
3/8” Plexiglass Vision End Panels
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
v8.12
C
OUNTER
T
MODEL # CTPD
OP
D
ISPLAY
TOLL FREE: 800-525-3692
UNIT SHOWN WITH OPTIONAL
3/8” PLEXIGLASS VISION END PANELS
MODEL L D H VOLT AMP PLUG WT
CTPD36D 36 28 1/2 26 1/4 115 1.0 5-15P 140
CTPD48D 48 28 1/2 26 1/4 115 1.0 5-15P 200
CTPD60D 60 28 1/2 26 1/4 115 1.5 5-15P 260
CTPD72D 72 28 1/2 26 1/4 115 2.0 5-15P 315
CTPD96D 96 28 1/2 26 1/4 115 2.0 5-15P 420
The CTPD merchandiser is designed for use in stores where temperature and humidity do not exceed 75 degrees Fahrenheit and 55% R. H.
Locate away from direct sunlight, rapid air currents and extreme temperature changes. Exposure to air currents from ceiling fans,
air conditioners, ovens, etc. will disrupt the case's air curtain and refrigerated zone. Any adverse field conditions stated above will void warranty.
RPI in line with it’s current policy to continually improve it’s product reserves the right to change materials and specifications without notice.
CALL TOLL FREE: 800-525-3692 (609-714-2330)
FAX: 609-714-2331 www.rpiindustries.com
220 ROUTE 70, MEDFORD, NJ 08055
v8.12
Loading...