Road Talk User Manual
Dear customer,
Thank you for purchasing the car Bluetooth speaker Road Talk. To ensure correct
operation, please read this user manual carefully before operation.
Important Safety Instructions
◆ Keep speaker away from water and other liquids.
◆ Keep speaker away from any source of heat.
◆ Adjust the volume to a suitable level so as to avoid damaging y our hear i ng, or the unit
itself.
Features:
◆ Bluetooth 4.0 Hands-free (mobile) Communication , support to pair with two mobile
simultaneously. Multip oint supp ort for HFP co nne cti on to 2 h and sets f or v oice and a lso for
A2DP sources for music playback.
◆ Built-in Voice Module
◆ Low power consumption, it will auto enter t he sleep mode w hen not pair ed with mo bile.
◆ Ergonomic design
◆ With Alloy Back Splint, can be handed on the Car Visor easily
Technical Data
Bluetooth: 4.0
Impedance: 4 ohm
Output: 1W
Voltage: DC 5V
N.W: 89 g
Dimension: 103*59*37.5 mm
Li Battery: 800 mAh
Talking Hours: 12 hours
Standby Hours: 900 hours
Package Contents
Car Bluetooth Speaker R oad Talk, USB Charging Cable, User Manual.
Quick Start
1. Microphone
2. Hands-free button
3. Speaker (Driver)
4. Volume Knob
5. ON/OFF
6. Charging Slot
7. Battery
Instructions
1. Power On
Please turn the switch to the ON position
LED flash quickly in blue means the speaker is waiting for pairing. The LED light will flash
slowly when paired.
2. Power Off
Please turn the switch to the OFF position
Speaker will enter the sleep mode after 10 minutes when disconnect with the mobile
phone. The next time using t he speaker, please re-power on the spea ker ag ain.
Please Note: LED flash in or ange means the speaker battery is under low ca pacity.
3. Bluetooth Paired
(1) The first time to use this speaker, please follow below steps
Please turn the switch to the ON position. LED light will be flashing in blu e quickly.
(2) Turn on the Bluetooth function of the mobile, and start to search the Bluetooth device.
The “Road Talk” will be fo und, plea se connect it. The mobile may remind you to input the
pairing code). The speaker’s default pairing code is “0000”. When Bluetooth connected,
the LED blue light will flash slowly.
(3) The speaker will be auto pair to the prev ious mobile. If want to pair with another mobile,