Royer R-10 Datasheet

ROYER R-10

Ribbon-Velocity Studio Microphone

The Royer R-10 is a passive mono ribbon microphone designed for
critical studio and live performance applications. Its compact size
and mounting configuration allows for flexible placement with mini­mum intrusion. The R-10 exhibits a flat frequency response and a
well-balanced soundfield, while at the same time handling sound
pressure levels of up to 160 dB @ 1 kHz.

The R-10 incorporates advancements pioneered by Royer Labs,
including a multi-layered wind screen and an internally shock­mounted ribbon transducer. The layered wind screen provides

superior protection from air blasts and plosives, and also reduces

proximity effect so guitar cabinets and acoustic instruments can be

close miked with less bass build-up. The R-10’s internally shock­mounted ribbon transducer assembly isolates the ribbon element from shocks
and vibrations and increases ribbon durability.

The R-10 is a perfect choice for electric guitars, brass instruments and drums,
and its figure-8 pattern conveys superb ambience and depth when used for room

miking applications. The R-10’s smooth frequency response, phase linearity and

lack of self-distortion make it ideal for digital recording.

The R-10 incorporates Royer’s patented offset-ribbon technology and low mass,

2.5-micron (99.9% pure) aluminum ribbon element. A custom designed
impedance-matching transformer minimizes saturation and the open grill
configuration minimizes standing waves and associated comb-filtering effects.

The transducer’s flux-frame design and rare earth Neodymium magnets create a

powerful magnetic field which increases sensitivity while reducing stray magnetic
radiation.

The R-10’s patented offset-ribbon design positions the ribbon element towards

the front of the transducer, which allows for the higher SPL handling of the front
(logo) side and the option of a brighter response when recording lower SPL
sound sources on the back side (3 feet or closer; phase reversed position).

R-10 FEATURES

• High SPL capability for electric guitar, brass and other close miking applications

• Multi-layered wind screen provides superior protection to ribbon element

• Internally shock-mounted ribbon transducer gives increased durability

• Passive design and custom transformer minimize high SPL overload

• Extremely low residual noise

• Ribbon element not affected by heat or humidity

• Absence of high-frequency peaks, “ringing” and phase shifts

• Equal sensitivity from front or back of the element

RECOMMENDED APPLICATIONS

• Close miking in the studio and on live stages

• Electric & acoustic guitars

• Drum overheads, kick drum (see manual for position),

room miking

• Percussion instruments

• Brass, horn sections

• Strings - solo & sections

• Acoustic piano

• Vocals

ROYER R-10

Technical Specifications

Acoustic Operating Principle

Polar Pattern

Generating Element

Magnets

Frequency Response

Sensitivity

Output Impedance

Maximum SPL

Recommended Load Impedance

Output Connector

Dimensions

Weight

Shipping Weight

Accessories

Electrodynamic pressure gradient

Figure-8

2.5-micron aluminum ribbon

Rare Earth Neodymium (Grade 52)

30Hz-15,000Hz +/- 3dB

-54dBv (re. 1v/pa)

100 Ohms

135dB @ 50 Hz, 160dB @ 1kHz

700 Ohms (or greater)

Male XLR 3-pin (Pin 2 Hot)

Length including mounting base: 5 7/8 inches (149 mm)
Width 1 3/8 inches (35 mm)

13 oz (368 grams)

Single: 2.5 lbs, Matched Pair: 4 lbs

Microphone Holder, Mic Sock, Carrying Case

Microphone

Microphone Warranty

Adjustable Swivel Mount (Black)

Five Years, First re-ribbon free in first year

Matched pairs are available at extra charge

Frequency Response and Polar Pattern

+10

+5

0

-5

-10

20 50 100 500 1000 5K 10K 20K

15K

Royer Labs

www.royerlabs.com

2711 Empire Ave, Burbank, CA 91504
Tel. [phone] Fax [phone]

300˚

270˚

240˚

0˚

180˚

30˚

60˚

120˚

150˚

200Hz
1kHz
10kHz

330˚

210˚

COPYRIGHT ROYER LABS 2017

All specifications subject to

change without notice

90˚