4HP15L
HIGH EFFICIENCY
SPLIT HEAT PUMP SYSTEM
PRODUCT SPECIFICATIONS
COMPRESSOR
• High-efficiency scroll compressor
• R410A refrigerant
• Grommet mounted compressor for quiet
operation
• Heavy-duty compressor sound blanket for quiet
operation
• Internally protected against high temperature
motor overload conditions
CABINET
• Full metal louvered construction to protect the
coil
• Individual metal louvered panels remove easily for
coil cleaning and service
• Corner-mounted controls for easy service
• Baked polyester paint finished over galvanized
steel for maximum durability
• 45-degree offset gauge ports for easy service
• External gauge ports for easy service
UP TO 15 SEER & 9.0 HSPF
FORM NO. 4HP15L-100 (12/2018)
COILS
• Omniguard™ total corrosion protection
technology designed coil
• Enhanced tube-and-fin coil design featuring
MHT™ Technology
• Lanced fins for maximum heat transfer
• Factory tested for leakproof construction
• Raised coil prevents debris from impeding airflow
COMPONENTS
• 45-degree offset gauge ports for easy service
• Factory installed high and low pressure switches
• Thread-on pressure switches for simple, quick
service
• Factory installed filter dryer
• Fan orifice for smoother airflow and sound level
reduction
• Charged for 15 feet of line set
• Discharge muffler for quiet operation
• Quiet Shift™ capable to reduce noise during
defrost
WARRANTY
10 year limited warranty on compressor
10 year limited warranty on all parts, extended
warranty available*
*Warranty provides for a total of 10 years of limited warranty coverage
(Standard 5-year limited parts warranty plus an additional 5-year limited
extended parts warranty). Warranty must be registered online within
60 days of installation to qualify for 10-year coverage. Unregistered
equipment defaults to 5-year coverage. Lifetime limited heat exchanger
warrant y applies to registered equipment only (Standard 20 years with
no online registration). See full warranty at www.alliedair.com for terms,
conditions and exclusions.
NOTE:
For the latest AHRI system matches, please visit
www.alliedratings.com or www.AHRInet.org
TM
DESIGN
• Designed to perform in temperatures up to 125°F
• Designed to perform in temperatures down to 0°F
- Page 1 -
15 SEER SPLIT SYSTEM HEAT PUMP
4HP15L
MODEL NUMBER GUIDE
4 HP 15 L 24 P - 50 A
REFRIGERANT
4 = R410A
HP
HEAT PUMP
NOMINAL SEER
15
L
LOUVERED
MINOR REVISION
CODE
MAJOR REVISION
50 = Omniguard®
ELECTRICAL
P - 208-230V/60hz/1Ph
TONNAGE
18, 24, 30, 36, 42, 48, 60
PHYSICAL AND ELECTRICAL DATA
Model
4HP15L18P-50 208-230/60/1 197-253 12.3 20 9.0 48 1.1 1/6 825 182
4HP15L24P-50 208-230/60/1 197-253 17.9 30 13.4 58 1.1 1/6 825 184
4HP15L30P-50 208-230/60/1 197-253 17.1 25 12.8 64 1.1 1/6 825 183
4HP15L36P-50 208-230/60/1 197-253 18.7 30 14.1 77 1.1 1/6 825 199
4HP15L42P-50 208-230/60/1 197-253 25.8 45 19.2 123.9 1.8 1/4 825 249
4HP15L48P-50 208-230/60/1 197-253 26.2 45 19.6 130 1.8 1/4 825 252
4HP15L60P-50 208-230/60/1 197-253 29.6 50 22.2 127.9 1.8 1/4 825 270
Note:
Weights listed are unit weights with packaging
+ Factory charged for 15 feet of line set. Adjust per installation instructions.
Voltage/Hz/
Phase
Voltage
Range
Min.
Circuit
Amp.
Max.
Over
Current
Device
(amps)
Compressor Outdoor Fan Motor
Rated
Load
(amps)
Locked
Rotor
(amps)
Full Load
(amps)
Rated HPNom.
RPM
Shipping
Weight
(lbs.)
UNIT DIMENSIONS AND SOUND RATINGS
Model
4HP15L18P-50 28.25 28.25 43.25 76
4HP15L24P-50 28.25 28.25 43.25 76
4HP15L30P-50 28.25 28.25 43.25 76
4HP15L36P-50 28.25 28.25 37.25 76
4HP15L42P-50 32.25 32.25 37.25 79
4HP15L48P-50 32.25 32.25 37.25 80
4HP15L60P-50 32.25 32.25 43.25 80
Note:
Dimen sions listed are unit sizes w/o packaging
A - Width B - Depth C - Height
Dimensions (inch)
Sound Rating
(dBA)
Page 2