Royal Sovereign RSL-2702 User Manual

19

RSL-2702 Laminator

OWNER'S MANUAL

Read all instructions carefully before use.

For any Customer Support needs please choose the

Customer Support tab on www.royalsovereign.com

Royal Sovereign International Inc.

www.royalsovereign.com

RS International Australia PTY. LTD.

30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL : [phone]
FAX : [phone]
E-mail : [e-mail]

CORPORATE HEADQUARTERS

Royal Sovereign International Inc.

2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : [phone] FAX : [phone]
E-mail : [e-mail]

Royal Sovereign Inc.

<Oversea Sales Office>

1001, World Meridian II, 426-5, Gasan-dong,
Geumcheon-gu, Seoul, 153-759, KOREA
TEL : [phone] FAX : [phone]
E-mail : [e-mail]

RS Canada Inc.

164 Oakdale Road, Toronto, Ontario M3N 2S5
CANADA
TEL : +1

) 416-741-8400 FAX : [phone]

E-mail : [e-mail]

RS Holland B.V.

Planetenweg 75 2132HM Hoofddorp, The Netherlands.
TEL : [phone]
FAX : [phone]
E-mail : [e-mail]

15. W ARRANTY

Royal Sovereign International warrants the equipment sold is free from defects in
material and workmanship for a period of One (1) year for Parts and Labor from the date
of installation, excluding lamination rollers which are warranted for Six (6) months. This
warranty is extended only to the original purchaser. This warranty is the only warranty
made by Royal Sovereign International and cannot be modified or amended. Royal
Sovereign’s sole and exclusive liability and the customer’s sole and exclusive remedy
under this warranty shall be, at Royal Sovereign’s option, to repair or replace any such
defective part or product. These remedies are only available if Royal Sovereign’s
examination of the product discloses to Royal Sovereign’s satisfaction that such defects
actually exist and were not caused by misuse, neglect, attempt to repair, unauthorized
alternation or modification, incorrect line voltage, fire, accident, flood or other hazard.

All warranty claims must be filed through the authorized Royal Sovereign dealer or
reseller through which the equipment was originally purchased. Model, serial number
and date of delivery are required for all claims.

The warranty made herein is in lieu of all other warranties, expressed or implied,
including any warranty or merchantability or fitness for a particular purpose. Royal
Sovereign will not be liable for personal damage or personal injury (unless primarily
caused by its negligence), loss of profit, or other incidental or consequential damages
arising out of the use or inability to use this equipment.

This warranty specifically does not cover damage to laminating rollers caused by knives,
razor blades, or any sharp objects or abrasives, or failure caused by adhesives, or
damage caused by lifting, tilting or improper use of the machine. Warranty repair or
replacement by Royal Sovereign or its authorized Reseller(s) does not extend the
warranty beyond the initial one year period from the date of installation. Unauthorized
customer alterations will void this warranty.

LIMITED WARRANTY

RSL-2702

21

TABLE OF CONTENTS

1. INTRODUCTION

TOPIC PAGE

1. Introduction.......................................................................................................... 2

2. Safety Precautions............................................................................................... 2

3. Included with Laminator.......................................................................................3

4. Product Identification............................................................................................ 3

5. Loading Film..........................................................................................................4

6. Threading Film

6.1. Hot Film...................................................................................................... 5-6

6.2. Cold Film....................................................................................................... 7

6.3. Mounting........................................................................................................ 8

7. Control of Roller Pressure ................................................................................... 9

8. Control Panel...................................................................................................... 10

9. Laminating Steps

9.1. Hot Laminating....................................................................................... 11-12

9.2. Cold Laminating.......................................................................................... 13

10. Using Cross Cutter........................................................................................... 14

11. Maintenance..................................................................................................... 15

12. Troubleshooting ............................................................................................... 16

13. Recommended Temperature and Speed Settings.......................................... 17

14. Specifications...................................................................................................18

15. Warranty........................................................................................................... 19

2. SAFETY PRECAUTIONS

Failure to comply with any of the following safety procedures could result in serious injury.
Please read the instructions carefully and keep for future reference.

1. Only a licensed electrician should install wiring and outlet for the laminator.

2. Ensure the unit is plugged into a properly grounded outlet with the correct voltage.

3. Keep hands and clothing (i.e. Neckties) away from rollers.The rollers have pinch points
that can trap body parts or clothing and cause serious injury.

4. Keep flammable and wet objects away from the machine.

5. Place machine on a level surface.

6. Avoid excessive sunlight, humidity and extreme temperatures.

7. Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving
and/or repairing.

8. Keep out of reach of children.

9. Only Royal Sovereign authorized maintenance and service technicians should make
repairs.

10. Do not attempt to laminate items that exceed total recommended material thickness

for the unit

11. When cleaning the machine, don't use flammable sprays or materials.

12. Do not touch the rollers when they are hot or place foreign objects inside the machine.

13. Do not cover the surface of the machine until the machine has completely cooled.

Thank you for choosing a Royal Sovereign laminator. It has been designed and
manufactured to provide years of continuous service. For complete operating and
maintenance information please read this manual thoroughly. Upon receipt of your
laminator, please inspect the box, the machine and all other contents for shipping
damage. Damage should be brought to the immediate attention of the delivering carrier
(See page 3 for list of shipment elements).

RSL-2702

43

3. INCLUDED WITH LAMINATOR

4. PRODUCT IDENTIFICATION

5. LOADING FILM

1. As shown in picture 1, insert auto grips onto the upper/lower film shaft.

2. As shown in picture 2, using the special tool, fix the auto grips on the
film shaft with set-screws.

3. Set the glossy side of the upper and lower film towards the heat rollers.
( Glossy side is PET film and matte side is thermal polymer laminating
adhesive)

4. Center film as shown in picture 3 and 4.

Picture 1

Picture 2

Picture 3

Picture 4

NO PART NAME NO PART NAME

1 UPPER FILM 7 LOWER FILM
2 TAKE-UP BOBBIN 8 GUIDE-DOCUMENT
3 IDLE BAR 9 HANDLE-TENSION
4 HOT ROLLER 10 PRESSURE LEVER
5 SAFETY COVER 11 CONTROL PANEL
6 FRONT-TABLE 12 KNOB-TENSION

Power supply:

220V~240V

Power supply:

100V~120V

PART NAME EA REMARK PART NAME EA REMARK

FUSE(65TS)

(AC250V 10A)

11

FUSE(65TS)

(AC250V 20A)