Royal Sovereign ARP-904EC User Manual

Royal Centurian Inc.

ARP-904EC

OWNER’S MANUAL

MANUAL DEL PROPIETARIO

Portable Air Conditioner

Acondicionador de Aire Portátil

Read and retain these instructions for future reference

Lea y tenga presente estas instrucciones para futuras consultas

Parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Safety Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Operation/Functions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10 Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12

PORTABLE AIR CONDITIONER

Model ARP-904EC

TABLE OF CONTENTS

ARP-904EC

PARTS

Handle

Control panel

Evaporator Filter

Condenser

Air Outlet

Air Louvers

Rear Casters

Exhaust Air Outlet

Power Cord

Drain Port

Front Casters w/ Lock

Exhaust Air Hose

BEFORE USE

SAFETY PRECAUTIONS

1. Only use in the upright position on a flat, level surface at least 20”/50cm from any object.

2. Do not place objects on top or in front of the unit.

3. Closely supervise children and pets while unit is in use.

4. For indoor use only.

5. Turn off and unplug the unit when it is not in use.

6. Do not use in wet environments.

7. Do not pull the unit by the cord.

8. If the power cord is damaged, it must be replaced by an electrician to avoid hazard or injury.

FOR MAXIMUM EFFICENCY

1. Do not exceed the recommended room size of 300 sq. feet.

2. Keep doors and windows closed.

3. Keep curtains or blinds closed during the sunniest part of the day.

4. Keep filters clean.

5. Once room has reached the desired conditions, reduce the temperature

ARP-904EC

INSTALLATION

1. Connect the hose to the exhaust air outlet.

2. Insert the exhaust hose into the window spacer.

NOTE: The hose may be extended from 1-5 ft/300-1500mm but for maximum efficiency use the shortest length

possible. For best results do not let the exhaust hose exceed a 45° angle.

OPERATION/FUNCTIONS

CONTROL PANEL

1. Temperature/Hour LED Display

2. Power button

3. Power/Water Full indicator light

4. Temperature DOWN button

5. Temperature UP button

6. Mode button (Fan, Cool, Auto, Dry)

7. Fan indicator light

8. Cool indicator light

9. Auto indicator light

10. Dry indicator light (Dehumidifier)

11. Speed button (High, Medium, Low)

12. High indicator light

13. Medium indicator light

14. Low indicator light

15. Sleep button

16. Sleep indicator light

17. Oscillating button

18. Oscillating indicator light

19. Timer button (1-12 hours)

20. Timer indicator light

ARP-904EC

ON/OFF

Press this button to start and stop the unit.

MODE

Press this button to select the Fan, Cool, Auto or Dry (Dehumidifier) mode. The Fan mode will allow you to select a Speed of High, medium or Low. The Cool mode will allow you to select a Speed of High, Medium or Low or a specific temperature by using the UP/DOWN buttons. The Auto mode will automatically adjust the settings between Fan (High, Low and Medium) and Cool (High, Low and Medium) depending on the current temperature in the room. Press the Auto button and then use the UP/DOWN button to select your desired temperature. If the temperature in the room is at 73°F and above the COOL mode and SPEED will automatically be selected to keep the room at the desired temperature. If the temperature in the room is between 68°F 73°F the FAN mode and SPEED will automatically be selected to keep the room at the desired temperature. The Dry mode will allow you to dehumidify the room and remove excess moisture.

SPEED

Press the SPEED button to select a High, Medium or Low setting.

TIMER (1-12 Hours)

The timer button will allow you to turn the unit ON or OFF without even being in the room. If the unit is off- Press the TIMER button (Timer indicator light will be lit). Continue pressing the TIMER button until you

select the quantity of hours (1-12) you want the unit turned on in. Example- If you want the unit to turn on in 3 hours then Press the button until it shows 3, the unit will automatically turn on in 3 hours.

If the unit is on- Press the TIMER button (Timer indicator light will be lit). Continue pressing the TIMER button until you select the quantity of hours (1-12) you want the unit turned off in. Example- If you want the unit to turn off after 4 hours then press the button until it shows 4, the unit will automatically turn off in 4 hours.

SLEEP

By pressing the SLEEP button, the set temperature will increase 2°F / 1°C in the first hour, another 2°F / 1°C in the second hour and then remains at that temperature.

WATER FULL

When the water tank is full the POWER/WATER FULL light will light up and you will hear a beeping noise. At this point you must empty it out by placing a container underneath the drain port, remove the rubber drain plug and then water will flow out until it is empty.

OSC (OSCILLATING) FEATURE

This feature allows the air to flow in all directions. Press the Oscillating button (OSC indicator will be lit). The air louvers will begin oscillating. Press the OSC button again to turn it off.

REMOTE CONTROL

A - Timer button B - Fan button C - Mode button D - Sleep button E - Oscillating button F - ON/OFF button G - Temperature UP button H - Temperature DOWN button

+ 16 hidden pages