Royal Extreme 2 Instruction Manual
RESET
# Reform reset procedure when using the Personal Organizer for the first time.
# Warning! Reset will erase any user-entered information and clear all settings.
1. Press reset button on the back of the unit with a pin.
“RESET?” will display on the screen.
RESET?
2. Press《OK》in 4 seconds to confirm it and “RESET!” will appear, otherwise it will jump to
home time and the data won’t be erased.
RESET!
3.Two seconds later, the screen will display the capacity in the percentage format and then
back home time mode.
CHANGING CAPITAL AND SMALL LETTER
Press《CAP》to change alphabet in capital or small letter.
BEEP SOUND ON/OFF
To uc h《
》key to turn the beep sound off or on .
PREFERENCE SETTING
Touch t he《MENU》option located on the numeric keyboard. Use《▲▼》to select one of the
following options:
1. LANGUAGE?: Touch《OK》for language selection.
There are 7 languages to choose from: English(default),ESPAÑOL(Spanish),
FRANÇAIS(French), DEUTSCH(German), ITALIANO(Italian), PORTUGUÊS(Portuguese)
and NEDERLANDS(Dutch).
Use《▲▼》arrows to select desired language. Press《OK》to confirm your selection.
2. DATE SET?: Touch《OK》for date format selection.
Use《▲▼》to select desired format (MM/DD/YYYY YYYY/MM/DD, or DD/MM/YYYY) and
touch《OK》again to confirm it.
3. MEMORY CHECK: Touch《OK》. Available memory will be displayed for 2 seconds.
4. PC-SYNC.?: Touch《OK》to sync with PC after the cable has been connected
# In the MENU mode ,the function of Search key(《△》 and《▽》) is the same as《▲▼》
keys
BUTTONS FUNCTION
There are some buttons located on the side or face of the crust as follows:
1.《△》《▽》: The buttons execute the data search
function
2.《☉》: The button executes the same function as《OK》key.
1
3.《on》: Press this button to turn the unit on or off. The unit will turn off automatically after 5
minutes unless a key or a button is touched.
nd
KEY FUNCTION
2
The touch pad display is available in two different keyboard layouts. To select the specific
nd
entry key you need use the《2
》key to toggle between the different keyboard layout.
CLOCK MODE
HOME CLOCK
SETTING HOME TIME ZONE
OPERATION DISPLAY
To uc h《clock》twice
(display without symbol ＊)
NYC WED
1-1-2003
CAPS 0-00-00
Press《△》or《▽》to search the city of your time zone.
For example :LON
Press《EDIT》and then press《clock》to select home clock
LON WED
1-1-2003
CAPS 5-01-17
＊LON WED
1-1-2003
CAPS 5-03-21
SETTING HOME TIME
nd
# Before setting time, press《2
》《DST》to switch to the daylight saving time.(Symbol # will
display when DST is set.)
# Touch《12/24》to toggle between 12-hour and 24-hour format.
# Change date format by using the operation direction in the menu function
For example: TAIPEI January 15 2002 at 5:25 A.M. in MM/DD/YYYY format
OPERATION DISPLAY
Press《clock》to select HOME TIME(display with symbol
＊),then touch《EDIT》in the numeric keyboard
＊L
ON # WED
01-01-2003
CAPS A 06-07-00
SHIFT LOCK
Press《△》or《▽》until the city of your time zone appears,
and you can also input the city name(6 characters Max.). For
example: TAIPEI
＊Press《▼》to move the cursor
to the 2
nd
line if your time zone
＊TAIPEI # WED
0
1-01-2003
CAPS A 06-07-00
is less than 6 characters.
2
Enter the date 01 15 2002
SHIFT LOCK
＊TAIPEI # WED
01-15-2002
CAPS A 06-07-00
Press《AM/PM》to select AM or
PM (A = a.m. P = p.m.)
SHIFT LOCK
＊TAIPEI # WED
01-15-2002
CAPS A 06-07-00
Enter time HH-MM 05 25 and then press《OK》
The input day shows automatically
SHIFT LOCK
＊TAIPEI # TUE
1-15-2002
CAPS A 5-25-01
SEARCHING WORLD TIME
1. Press《clock》twice for world time mode (display without symbol＊)
2. Press《△》or《▽》to search the desired city.
# There are 43 major cities world time
STOP WATCH MODE
1. Press《clock》key repeatedly to select Stopwatch mode.
In the second line , the first “00” stands for HOUR ,the second “00” stands for MINUTE, the
third “00” stands for SECOND , and the last “00” stands for MILLISECOND
2. The function of the search keys:《△》《▽》
1)Start the initial time counting from “00” and restart the time counting after stop
2) Stop the time counting and the running of the signal “]” together
* The time will not be counted in the inner of the unit
3) Stop the running of the signal “]” solely after pause
3. The function of the keys:《△》《☉》
1) Pause the time counting on the display after start
* The time counted will be kept on the display without running
*The signal “]” will still be running
* The time is still be counting in the inner of the unit
2) Restart the time counting after pause
* The time will be counting from the sum of the time on the display and the inner of the
organizer
3) Clear the time counting after stop completely
* If without the time counting in the inner ,press it once to clear the time to “00”
*If with the time counting in the inner of the unit, press it once the display the sum of the
counting and twice to clear the time counting to “00”
4.The function of the key《CE》
Press《CE》key to clear the time counting to “0” whatever the status and period is
OPERATION DISPLAY
3
Press《clock》repeatedly to select the STOP WATCH function
STOP WATCH
00-00-00_00
Press SEARCH keys to start the initial time counting from “00” STOP WATCH
00-00-12_88
] ] ] ] ] ] ]
Two options: Option (1)
Press SEARCH keys to stop the time counting
#The time counted is kept
#The signal “]”stop running
Press《OK》key to clear the time counting
STOP WATCH
00-00-12_88
] ] ] ]
STOP WATCH
00-00-00_00
Option (2)
Press《OK》key to pause
# The signal “]” is still running and time is being counted in the
inner
STOP WATCH
00-00-12_88
] ] ] ] ] ] ] ] ] ]
Press SEARCH key to stop the running of the “]” STOP WATCH
00-00-12_88
] ] ] ] ] ] ] ] ] ]
Press《OK》key once to display the time sum (on the screen
and in the inner)
# The signal “]” keeps calm
STOP WATCH
00-02-45_68
] ] ] ] ] ] ] ] ] ]
# The inner time counting is added into the time on the screen
Press《OK》again
STOP WATCH
00-00-00_00
COUNT DOWN MODE
1.Press《clock》key repeatedly to select count down mode.
In the third line , the first “00” stands for HOUR ,the second “00” stands for MINUTE and the
third “00” stands for SECOND
The maximum can be set is “59”
2.The time to be counted down can be set by alternative methods below:
1) Press up or down cursor once to add or minus one unit of the time and the cursor won’t
move automatically
2) Input the time directly and the cursor will move automatically
* If the number input exceeds the maximum , it will not be accepted until you input the
valid number
3. Press left or right cursor key to move the cursor
4. Press《OK》key once to start and twice to enter the edit mode
5.When the time has jumped down to “00-00-00” , the sound “Bi-Bi” will be heard for 30
seconds with the flashing of the time signal “00-00-00”.Pressing any key to stop the sound
6. Example : Set and edit the counted time :13 hours, 1 minute and 2 seconds
OPERATION DISPLAY
Press《clock》key to select Count Down function
COUNT DOWN
4
00 – 00 – 00
Input [1] [0]
Or press up cursor once then press right key
Press number key [2] or
Press《▲》twice to select the number then press《►》
Press [9] [1] [3]
Press《OK》key to start the counting down
COUNT DOWN
00 – 01 – 00
COUNT DOWN
0 – 01 – 02
0
COUNT DOWN
13 – 0
1 – 02
COUNT DOWN
13 – 01 – 01
Press《OK》key to enter the edit mode
COUNT DOWN
13 – 01
– 00
ALARM MODE
Alarm types:
The following options are available; indicating what type of alarm is on:
Time Alarm: (((˙ ))) - timed alarm (See example)
Hourly Chime: - beeps for one second every hour
Schedule Reminder: (((/))) - alarms all timed Schedule events
Example: Setting alarm at 6:30 P.M.
OPERATION DISPLAY
Press《clock》key to select ALARM mode (The hour format has
been set as 12-hour format in home time)
Press《EDIT》
Press 0630,then press《AM/PM》to toggle between “AM” and
“PM”
ALARM
A 12-00
ALARM SET
2-00
A 1
ALARM SET
6-30
P 0
Press《clock》repeatedly until (((˙ ))) appears
ALARM SET
(((˙ )))
P 06-30
Press《OK》
ALARM
(((˙ )))
P 6-30
# Alarm function won’t be on unless icon is displayed on the LCD.
# When the home time reaches the alarm setting, the alarm will keep sounding for 60
seconds.Press any key to turn off it.
# If you want to change the alarm setting, just repeat all procedures above, then the new
setting will overwrite the old setting.
TELEPHONE MODE
There are two kinds of telephone directory- Personal & Business.
5
Loading...