Round Solutions Ping Pong SAFETY INSTRUCTIONS MANUAL

PINGPONG SAFETY INSTRUCTIONS MANUAL

INSTRUCTIONS FOR SAFE USE

To avoid malfunction or damage to your PingPong please observe the
following:

■ Do not expose it to water, moisture or place on a conductive surface

whilst in operation.

■ Do not expose it to heat from any source; the PingPong is designed

for reliable operation at normal ambient room temperatures.

■ Take care whilst handling to avoid mechanical or electrical damage to

the
printed circuit board and connectors.

■ Avoid handling the printed circuit board while it is powered. Only handle

by the edges to minimize the risk of electrostatic discharge damage.

■ The PingPong is not designed to be powered from a USB port on

other connected equipment, if this is attempted it may malfunction.

COMPLIANCE INFORMATION

The PingPong complies with the relevant provisions of the RoHS
Directive for the European Union. In common with all Electrical and
Electronic Equipment (EEE) the PingPong should not be disposed of as
household waste. Alternative arrangements may apply in other

jurisdictions.

ELECTROMAGNETIC COMPATIBILITY

■ This product is in conformity with the protection requirements of EU
Council Directive 1999/05/EC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.

■ This product has been tested and found to comply with the limits for

Class II Information Technology Equipment according to the European
Standard.

AarLogic

DESIGNED AND DISTRIBUTED BY

Round Solutions GmbH & Co. KG

Hans-Boeckler-Straße 16
63263 Neu-Isenburg
Germany