Rotisol GF950-5 Installation Manual

GAS GRANDES FLAMMES

ROTISSERIES

Ref.: 950/3 950/5 950/8 1350/3 1350/5 1350/8 1650/8

INSTALLATION MANUAL

Rotisol-France – 341 N. Oak St., Inglewood, CA 90302 – Tel: [phone] – Fax: [phone]

1. TECHNICAL DETAILS

1.1. DIMENSIONS

Grande flamme rotisseries, gas and electric, operated under a specification of 220V~
60Hz.

Unit Reference Width Depth Height Weight
Rotisserie 1650.8 65" 22 ½" 69 ½" 770
Rotisserie 1350.8 53 1/8" 22 ½" 69 ½" 660
Rotisserie 1350.5 53 1/8" 22 ½" 45 ½" 430
Rotisserie 1350.3 53 1/8" 22 ½" 32 1/8" 225
Rotisserie 950.8 37 3/8" 22 ½" 69 ½" 434
Rotisserie 950.5 37 3/8" 22 ½" 45 ½" 308
Rotisserie 950.3 37 3/8" 22 ½" 32 1/8" 163
Rotisserie 950.2 El 37 3/8" 22 ½" 29 3/8"
Roof 1650/R 65" 19 ½" 6 ¼" 92
Roof 1350/R 53 1/8" 19 ½" 6 ¼" 77
Roof 950/R 37 3/8" 19 ½" 6 ¼" 60
Base cabinet 1350/BC 53 1/8" 22 ½" 30 ¾" 165
Base cabinet 950/BC 37 3/8" 22 ½" 30 ¾" 120
Heated base cabinet 1350/HBC 53 1/8" 22 ½" 30 ¾" 165
Heated base cabinet 950/HBC 37 3/8" 22 ½" 30 ¾" 120
Custom base cabinet 1650/CBC 65" 27 ½" 19 ¼" 203
Custom base cabinet 1350/CBC 53 1/8" 27 ½" 19 ¼" 180
Custom base cabinet 950/CBC 37 3/8" 27 ½" 19 ¼" 154
Short base cabinet 1650/SB 65" 27 ½" 9 ½"
Short base cabinet 1350/SB 53 1/8" 27 ½" 9 ½"
Short base cabinet 950/SB 37 3/8" 27 ½" 9 ½"

The unit is for professional use and should only be used by qualified personal.
The appliance must be installed in accordance with local safety standards and
regulations in force, in a well-ventilated area.
We recommend you to call a certified company for the installation of the unit.
The technical plate is situated at the back of the unit above the electrical cable.

Rotisol-France – 341 N. Oak St., Inglewood, CA 90302 – Tel: [phone] – Fax: [phone]

1.2. SITE OF THE MANUFACTURER’S PLATE

The manufacturer’s plate is situated at the rear of the appliance in the middle right.

Rotisol-France – 341 N. Oak St., Inglewood, CA 90302 – Tel: [phone] – Fax: [phone]

1.3. POSITION OF THE PILOT LIGHT &

THERMOCOUPLE

Rotisol-France – 341 N. Oak St., Inglewood, CA 90302 – Tel: [phone] – Fax: [phone]

1.4. TECHNICAL DATA

See specification sheets.

2. INSTALLATION

The unit should be installed in accordance with norms and regulations in force, in a
well-ventilated area.

2.1. POSITIONING

2.1.1. UNRAPPING

Unpack the rotisserie, which is rapped in film and fixed to a palette.

2.1.2. POSITIONING OF THE UNIT

The unit should be placed at a minimum of ¾” from the walls. The minimum
clearance from combustible construction is 6 inches from the side and 6” from the
back.

2.2. GAS CONNECTION

- The gas supply is on the left side on the back of the machine. A female pipe of

¾ inch has to be connected just above the valve.

- Open the side panel on the left side of the machine to readjust the gas

connections.

- For each burner, adjust the air flow in the flame by moving the air shutter on

the air inlet collar. The gas flow is controlled by a valve provided with a
security pilot burner and a thermocouple.

To check the result of your adjustment:

- Turn on the pilot. On the first utilization, press down the pilot knob long

enough to evacuate the air from the pipe.

Rotisol-France – 341 N. Oak St., Inglewood, CA 90302 – Tel: [phone] – Fax: [phone]