Rotisol DIC1 Installation Manual
OPERATING, INSTALLATION AND MAINTENANCE MANUAL
GRANITE WARMER DROP IN
(REF DIC1_DIC2_DIC3_DIC4)
GENERAL PRODUCT DESCRIPTION
REF
Unit Dimension
Electrical Spec
width
without
panels (mm)
depth
(mm)
height
(mm)
weight
(kg)
Voltage
power. (V)
Electrical
Power
(kw)
DIC1
610
510
131
23
230-50Hz
0.8
DIC2
760
510
131
29
230-50Hz
1
DIC3
760
610
131
34
230-50Hz
1.2
DIC4
915
610
131
41
230-50Hz
1.6
The Warmer Drop-In maintains temperatures with built-in granite on top. Electrically powered
by a voltage of 230V ~ 50Hz +earth.
The device is for professional use and should be used by qualified personnel.
Before starting any operation, please read the instructions carefully.
Retain this manual for future reference.
Changes to the facilities to accommodate the machine should be part of the user expenses.
The wiring should be done by a qualified electrician in accordance with local electrical code. A
properly wired and grounded outlet will assure proper operation.
Interventions on the electrical parts must be performed by qualified personnel in the
compliance with standards.
The company is not liable for damages if:
• incorrect use of the device
• non-compliance with standards
• incorrect installation
• non compliance with guidance on maintenance
• unauthorized modification
• Installation of non-original spare parts
• Installation and use of the module different than those provided by the manufacturer
The plate is located below the module.
BASIC COMPOSITION
• Plan presentation Granite Top.
• Embedding a slab temperature maintenance aluminum equipped resistance "fabric
heating "system with height adjustment.
• remote control box with built-in switch, digital display and electronic control temperature.
• Flexible Conduit 1 m stainless steel.
2. INSTALLATION
Before connecting and starting up the hot module, please ensurethat bookings power are made.
This work shall be borne by the client user, who must enforce, by companies approved, close
to the location of the device.
2.1. INTRODUCTION
UNPACKING
Unpack the module that is surrounded, shot and set on pallet.
Dispose of packaging according to the standards.
Loading...