Rotel X3 Specification Sheet

X3

STEREO INTEGRATED AMPLIFIER

2 x 350 Watts of
robust power

The Michi X3 Integrated Amplifier delivers uncompromised
audio performance with a full array of source inputs including
analog, digital, PC-USB, XLR, apt-X Bluetooth and a Moving
Magnet Phono Stage connection for classic vinyl lovers. The
X3 is conveniently packaged in an elegant industrial design
delivering 350 watts of Class AB power to 4 ohm speakers while
maintaining musical accuracy with exceptional acoustic detail.

An AKM 32 bit, 768kHz DAC preforms the critical digital to
analog conversion and is complimented by hand selected
components in all critical circuits leveraging over 58 years of
audio design experience. Countless hours of listening sessions
and rigorous bench testing ensures the X3 effortlessly delivers
on the promise of accurate musical expression true to the Michi
brand.

The X3 is replete with features for seamless integration in any
audio system. Rear panel connections support all common
cabling methods with 2 sets of custom engineered Michi

Class AB amplifier
design

AKM premium 32-bit/
768kHz Digital to
Analog Converter

Bluetooth with
apt-X and AAC

Rhodium plated speaker binding posts for bi-wire installations.
Front panel controls and a high-resolution display assures
trouble free operation and simple configuration using the Michi
IR remote control.

The X3 includes a custom engineered and Michi factory built
high efficiency, oversized, ultra-low noise, toroidal transformer
with independent voltage regulators isolating the digital, analog
and amplifier circuits eliminating unwanted noise and distortion.

Ethernet and RS232 connectivity provides simple integration
with all popular control systems with software updates available
via the Internet or a USB flash drive.

The X3 is sure to bring countless hours of entertainment for all
listening styles and music genre.

Balanced XLR
inputs

Includes remote
control

www.michi-hifi.com

X3

STEREO INTEGRATED AMPLIFIER

SPECIFICATIONS

Maximum Power Output

Continuous Power Output

Total Harmonic Distortion

Intermodulation Distortion

(60 Hz : 7 kHz, 4:1)

Frequency Response

Phono Input
Line Level Inputs

Damping Factor

(20 Hz - 20kHz, 8 ohms)

Input Sensitivity /
Impedance

Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)

Input Overload

Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)

Preamplifier Output Level /
Impedance

Tone Controls

Bass
Treble

Signal to Noise Ratio

(IHF “A” weighted)

Phono Input
Line Level Inputs

Channel Separation

Phono Input
Line Level Inputs

350 watts/channel (4 ohms)

200 watts/channel (8 ohms)

< 0.008%

< 0.03%

20 Hz-20k Hz (+0 dB, +0.4 dB)
10 Hz-100k Hz (+0 dB, -0.4 dB)

350

5.2 mV / 47k ohms
340 mV / 100k ohms
540 mV / 100k ohms

60 mV

3.5 V

5.5 V

1.9 V / 100 ohms

±10 dB at 100 Hz
±10 dB at 10k Hz

80 dB
102 dB

> 55 dB
> 55 dB

Digital Section

Frequency Response

Signal to Noise Ratio

(IHF “A” weighted)

Input Sensitivity/Impedance

Preamplifier Output Level

Coaxial/Optical Digital Signals

PC-USB

Power Requirements

Europe
USA

Power Consumption

Standby Power Consumption

Normal
Network Wakeup

BTU (4 ohms, 1/8 power)
Dimensions (W x H x D)

Front Panel Height
Weight (net)

Finish

20 Hz - 20k Hz (0 ± 0.4 dB)
102 dB

0 dBFs / 75 ohms

1.3 V (at -20 dB Volume Position)
SPDIF LPCM (up to 192kHz 24 bit)

USB Audio Class 1.0
(up to 96kHz 24-bit)
USB Audio Class 2.0
(up to 384kHz 32-bit)*

*Driver installation required
DSD and DoP support

230 V, 50 Hz
120 V, 60 Hz

500 watts

< 0.5 watts
< 2 watts

1303 BTU/h
485 x 150 x 452 mm

19" x 6" x 17 3/4"
132 mm / 5 1/4"

28.9 kg, 63.7 lb
Black

All specifications are accurate at the time of printing.

Michi reserves the right to make improvements without notice.