Page 1
RA-6000
STEREO INTEGRATED AMPLIFIER
DIAMOND SERIES
Certified
Roon Tested
The Rotel Diamond Series RA-6000 Integrated Amplifier
celebrates 60-Years of heritage and tradition delivering
performance, passion, and value synonymous with the brand’s
iconic Japanese heritage. The RA-6000 supports an exceptional
array of modern and legacy sources with RCA (3), XLR, Moving
Magnet Phono stage for vinyl fans, aptXTM HD and AAC wireless
Bluetooth, Coaxial (3), Optical (3), and asynchronous PC-USB
inputs.
Conveniently packaged in the elegant Diamond Series industrial
design the RA-6000 delivers 350 watts of robust, Class AB output
power into 4 ohm speakers. An in-house manufactured toroidal
transformer feeds dedicated power to all critical circuits utilizing
high eiciency, low ESR slit-foil smoothing capacitors delivering
an abundance of ripple free, reserve power and current with
exceptional control of rich, deep bass energy.
Physical and electrical isolation techniques are utilized in the
digital and high gain amplifier circuits reducing noise in the
highly sensitive analog stages further lowering the noise floor
and reducing distortion.
Supports MQA and
MQA Studio
2 x 350 Watts
of robust Class AB
power, 4 Ohms
Balanced XLR
inputs
Digital sources are processed via a premium 32-bit/384kHz
Texas Instruments Digital-Analog converter extracting the finest
of details portrayed on an immersive sound stage. Coaxial and
Optical inputs support 24-bit/192kHz PCM audio. The PC-USB
input renders up to 32-bit/384kHz high resolution music files,
unfolds and renders MQA and MQA Studio, and is fully certified
Roon Tested for the highest compatibility with Roon soware.
Front panel controls, a back-lit IR remote control and 2-line
display provide intuitive operation of the unit.
Ethernet, RS232,12V trigger and external remote input ensure
simplified integration with all popular control systems.
The RA-6000 is available in both black and silver colors.
Wireless aptX™ HD
and AAC Bluetooth
Texas Instruments
premium 32-bit/384kHz
Digital to Analog Converter
www.rotel.com
Page 2
RA-6000
STEREO INTEGRATED AMPLIFIER
SPECIFICATIONS
Maximum Power Output 350 watts/ch (4 ohms)
Continuous Power Output 200 watts/ch (8 ohms)
Total Harmonic Distortion < 0.0075%
Intermodulation Distortion < 0.03%
(60 Hz : 7kHz, 4:1)
Frequency Response
Phono Input 20 Hz - 20k Hz, 0 ± 0.5 dB
Line Level Inputs 10 Hz - 100k Hz, 0 ± 0.5 dB
Damping Factor 600
(20 Hz - 20 kHz, 8 ohms)
Input Sensitivity / Impedance
Phono Input (MM) 5.2 mV / 47k ohms
Line Level Inputs (RCA) 340 mV / 5.6k ohms
Line Level Inputs (XLR) 540 mV / 100k ohms
Input Overload
Phono Input (MM) 52 mV
Line Level Inputs (RCA) 3.5 V
Line Level Inputs (XLR) 4.5 V
Preamplifier Output / Impedance 1.9 V / 100 ohms
Signal to Noise Ratio
(IHF A-weighted)
Phono Input (MM) 80 dB
Line Level Inputs 103 dB
Digital to Analog Converters Texas Instruments
Digital Section
Frequency Response 10 Hz - 90k Hz (0 ± 2 dB, Max)
Signal to Noise Ratio (IHF A-weighted) 102 dB
Input Sensitivity/Impedance 0 dBfs / 75 ohms
Preamplifier Output Level 1.43 V (at -20 dB)
Coaxial/Optical Digital Signals SPDIF LPCM
(up to 24-bit / 192k Hz)
PC-USB USB Audio Class 2.0
(up to 32-bit / 384k Hz )*
*Driver installation required
Support MQA and MQA Studio
(up to 24-bit / 384k Hz )
Roon Tested
Power Requirements
USA 120 V, 60 Hz
EC 230 V, 50 Hz
Power Consumption 500 watts
Standby Power Consumption
Normal < 0.5 watts
Network Standby < 2 watts
BTU (4 ohms, 1/8th power) 1239 BTU/h
Dimensions (W x H x D) 431 x 144 x 425 mm
17 x 5 7/8 x 16 ins
Front Panel Height 3U / 132.6 mm / 5 1/4 ins
Weight (net) 18.81 kg, 41.47 lbs.
Finish Silver and Black
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
www.rotel.com
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
Being Roon Tested means that Rotel and Roon have collaborated to ensure you
have the best experience using Roon soware and the Rotel equipment together, so
you can just enjoy the music.
Loading...