Rotel A14MKII Specification Sheet
A14MKII
STEREO INTEGRATED AMPLIFIER
Certified
Roon Tested
The A14MKII is the flagship model in the 14 Series family of
Rotel products delivering 80 Watts of Class AB amplification into
8 ohm speakers powered by Rotel’s in-house manufactured,
oversized toroidal transformer and an array of 4 high eiciency
slit-foil bulk storage capacitors delivering an eortless acoustic
performance.
A fully redesigned Digital to Analog circuit topology utilizes a
Texas Instruments 32-bit/384kHz DAC with exhaustive tuning
and hand selection of all critical components delivering a
fuller, richer and more balanced presentation of the music.
Improvements to the power supply and amplifier gain stages
further refine the audio whether you are listening to a big band
orchestra or a solo vocalist.
Tone controls provide treble and bass adjustments in 1dB
steps up to +/- 10dB personalizing your experience for all music
genres, moods and settings with a BYPASS mode eliminating
unwanted noise and distortion.
Supports MQA and
MQA Studio
2 x 150 Watts
of robust Class AB
power, 4 Ohms
Moving Magnet
Phono input for
turntable connection
The A14MKII supports your favorite sources including analog,
digital, PC-USB with MQA, high-quality wireless aptX™ and AAC
Bluetooth streaming and even a Moving Magnet Phono stage for
vinyl fans.
The A14MKII is certified Roon Tested delivering the best
experience using Roon soware so you can just enjoy the music.
Control system integration is available utilizing Ethernet, RS232,
12V-Trigger and remote IR connections.
Dual 5-way speaker binding posts allow Zone 2 installations
with relay-controlled selection of the A-B speaker outputs. The
front panel graphic display includes a large volume indication
and audio stream information.
The A14MKII is comfortable in any setting delivering countless
hours of audio entertainment.
Wireless
aptX™ and AAC
Bluetooth
Texas Instruments
premium 32-bit/384kHz
Digital to Analog Converter
www.rotel.com
A14MKII
STEREO INTEGRATED AMPLIFIER
SPECIFICATIONS
Maximum Power Output
Continuous Power Output
Total Harmonic Distortion
Intermodulation Distortion
(60 Hz : 7k Hz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 Hz - 20k Hz, 8 ohms)
Input Sensitivity / Impedance
Phono Input
Line Level Inputs
Input Overload
Phono Input
Line Level Inputs
Preamp Output / Impedance
Tone Controls - Bass / Treble
Signal to Noise Ratio
(“A” weighting)
Phono Input
Line Level Inputs
150 watts/ch (4 ohms)
80 watts/ch (8 ohms)
< 0.018%
< 0.03%
20 Hz - 20k Hz (0 ± 0.5 dB)
10 Hz - 100k Hz (0 ± 0.5 dB)
220
3.4 mV / 47k Ohms
230 mV / 24k Ohms
50 mV
4 V
1.2 V / 470 Ohms
± 10 dB at 100 Hz / 10k Hz
90 dB
100 dB
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF “A” weighted)
Input Sensitivity/Impedance
Preamplifier Output Level
Digital Inputs
PC-USB
General
Power Requirements
Europe
USA
Power Consumption
Standby Power Consumption
BTU (4 ohms, 1/8 power)
Dimensions (W x H x D)
Front Panel Height
Weight (net)
Finish
10 Hz - 90k Hz (0 ± 2.0 dB, Max)
103 dB
0 dBfs / 75 Ohms
1.4 V (at - 20 dB)
SPDIF LPCM
(up to 24-bit / 192k Hz)
USB Audio Class 1.0
(up to 24-bit / 96k Hz )
USB Audio Class 2.0
(up to 32-bit / 384k Hz )*
*Driver installation required
MQA and MQA Studio
(up to 24-bit / 384k Hz )
230 V, 50 Hz
120 V, 60 Hz
280 watts
< 0.5 watts
632 BTU/h
430 x 93 x 34 5 mm
17 x 3 5/8 x 13 1/2 in
80mm, 3 1/8 in
8.94kg, 19.71 lb
Silver and Black
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
www.rotel.com
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
Being Roon Tested means that Rotel and Roon have collaborated to ensure you
have the best experience using Roon soware and the Rotel equipment together, so
you can just enjoy the music.
Loading...