REARSIGHT
7” DUAL INPUT MONITOR
250-8220 Installation/User Instructions
Parts Identification / Specifications
Page 1
System Controls
Page 4
System Menu Options / Wiring
Page 5
Installation
Page 6
Warranty
Page 8
Before operating the monitor, please read this manual
thoroughly and retain it for future reference.
Parts Identification
Contents
Quantity
7” Monitor W/
Standard Mounting Base 1
Power Cable /
Video Input Adapter Cable
1
Remote Control
1
Installation / User’s Manual 1
MONITOR BASE HARNESSES
REMOTE CONTROL INSTALL MANUAL
1/9
Specifications
Screen Size/Ratio 7”, 16:9
Screen backlight
LED, 300cd/㎡
Resolution 800x480
Compatible system
NTSC & PAL (automatically)
OSD control
Color, Brightness, Contrast, Volume,
Language
(English, Deutsch, French, Spanish,
Portugal, Italian, Dutch, Simplify
Chinese)
Viewing angle
Hor. L(60) R(60) Ver. UP(40)
DOWN(60)
Image reversion UP/Down and Left/Right
Power requirement 12V DC
Power consumption 5W
Storage temperature
-30 ℃~ 85℃
Working
temperature
-20℃ ~ 70℃
Size 265x193x67 mm
Weight
11 Ounces (312g)
Parking Lines Selectable ON/OFF
AV Inputs
2 video inputs
Input Control 2 independent triggers
Connection Type
4 PIN connector
Other features
OSD menu, Remoter control, Sunshade
design around, Built-in speaker
Accessories
Remote control, Power supply cable,
User manual, Bracket, Connector
conversion line
2/9
Warning: Always o bey Federal, State and local laws when installing
and using this product. Rostra Precision Controls is not responsible for
damages, accident, theft, or other situations caused by improper use
or installation.
NOTE: In Extreme cold weather the LCD panel may look darker when
powered on. This is normal with LCD panels and will return to full
viewing brightness as the panel warms to a normal operating
temperature.
3/9
Monitor Controls
1: Power Indicator
2: Remote Control Receiver
3: Power ON/OFF
4: Video Input Selection
5: Decrease Menu Selection / Decrease Volume
6: Menu
7: Increase Menu Selection / Increase Volume
Remote Control
1: Power
2: Video Input Selection
3: Increase Menu Selection
4: Menu
5: Decrease Menu Selection
6: Mode – Adjusts image contrast
4/9
Menu Options
Select Options by pressing “MENU” then use “+” or “- “to adjust the
value.
1. Brightness: Adjusts screen brightness
2. Contrast: Adjusts the contrast of the image
3. Color: Adjusts the color of the image
4. Volume: Adjusts the audio volume of the camera (if equipped)
5. Zoom: Changes the viewing Aspect from 16:9 to 4:3
6. TCON: Rotates Screen Orientation for specialty applications
7. Parkset: Selects Parking line display ON/OFF (Note: Some
cameras supply lines, this only controls the monitor based
lines). Parking lines display when trigger is active, not in
monitor mode.
8. ACC Time: Selects a delay so the monitor will stay active after
the trigger is shut off if desired – 0,2,5, or10 second selections
available.
9. Lang: Selects Menu Language
10. Reset: Returns the monitor settings to factory default - Press +
to select
Wiring Connections
S
5/9
Monitor Installation
1. The Base may be attached by either using the double sided
adhesive tape already attached or mounting with screws to a secure
location. Our recommendation is to use the screw method shown.
2. Slide the clasp into the notch at the back of the monitor.
3. Move the bracket to the proper location.
4. Tighten the thumb wheel to secure the monitor in position.
6/9
5. Adjust the monitor angle and tighten the thumb screw in the base.
NOTE: Alternative style mounting brackets are available from Rostra
Precision products for applications such as on-glass mounting and
severe vibration situations. Contact Rostra for further details or se e
us at www.rostra.com .
7/9
Warranty
The Company (Rostra Precision Controls) warrants that should this
product or any part thereof, under normal use, be proven defective
in material or workmanship within 36 months from the date of
original purchase, such defect(s) will be repaired or replaced with a
new or reconditioned product (at the Company's option) without
charge for parts and repair labor.
What is not covered? This Warranty does not cover the follow ing:
Damage incurred during s hipping or transporting the
product to the company or a service center
Elimination of car static or motor noise
Defects in cosmetic, decorative or non-operative structural parts
Costs incurred for installation, removal or reinstallation of
the product or consequential damage to accessories or
vehicle electrical systems
Damage caused by improper installation, mishandling,
misuse, neglect, accident, blown fuse, battery leakage, theft or
improper storage
Products whose factory serial number/bar code label(s) or
markings have been removed or defaced
Damage resulting from moisture, humidity, excessive
temperature, extreme environmental conditions or external
natural causes.
8/9
Limitations
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN
NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE
PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS
WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 36
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE, SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. No person or representative is authorized
to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you.
This Warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
Obtaining Warranty Service
To obtain repair or replacement within the terms of this Warranty,
return to the installing dealer for service.
The information in this manual was accurate at the time of printing. Changes
in features, function, appearance, or other attributes may occur at any time.
RPC is not responsible for errors or omissions in this manual and makes every
attempt to stay current.
20161220
9/9
Loading...