Rosslare O2S AY-G6270, O2S AY-H6270, O2S AY-H6280, O2S AY-G6280, O2S AY-G6380 Installation And User Manual

AY-G/H6xx0 Family

Open to Secure™ (O2S®)
Readers

Installation and User Manual

Models:

AY-G6270/G6280
AY-H6270/H6280

AY-G6370/G6380
AY-H6370/H6380

AY-H6270/H6280 AY-G6270/G6280 AY-G6370/G6380 AY-H6370/H6380

Copyright © 2016 by Rosslare. All rights reserved.

This manual and the information contained herein are proprietary to ROSSLARE
ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’
(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to
use the information.

No part of this manual may be re-produced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the express written
permission of ROSSLARE.

ROSSLARE owns patents and patent applications, trademarks, copyrights, or
other intellectual property rights covering the subject matter in this manual.

TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN
THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS
AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND
TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION
MAY RESULT IN LEGAL PROCEEDINGS.

The furnishing of this manual to any party does not give that party or any third
party any license to these patents, trademarks, copyrights or other intellectual
property rights, except as expressly provided in any written agreement of
ROSSLARE.

ROSSLARE reserves the right to revise and change this document at any time,
without being obliged to announce such revisions or changes beforehand or
after the fact.

Table of Contents

AY-G/H6xx0 Installation and User Manual iii

Table of Contents

1. Introduction ................................................................ 8

1.1 Box Content ........................................................................... 8

2. Technical Specifications .............................................. 9

3. Mounting ................................................................... 11

4. Wiring Instructions ................................................... 12

5. Reader Operation ...................................................... 14

6. Proximity Operation ................................................. 15

6.1 Supported Credential Technologies ........................................ 15

6.2 Wiegand Output ................................................................... 15

7. Keypad Operation Instructions ................................ 16

7.1 Programming Menu .............................................................. 16

7.2 Entering Programming Mode ................................................. 17

7.3 Exiting Programming Mode ................................................... 17

7.4 Selecting Keypad Transmission Format ................................... 17

7.5 Keypad Transmission Format Option Number ......................... 18

7.5.1 Option 1: Single Key, Wiegand 6-Bit (Rosslare Format) ................. 19

7.5.2 Option 2: Single Key, Wiegand 6-Bit Nibble and Parities ............... 19

7.5.3 Option 3: Single Key, Wiegand 8-Bit Nibbles Complemented ....... 19

7.5.4 Option 4: 4 Keys Binary + Facility Code, Wiegand 26-Bit .............. 20

7.5.5 Option 5: 1 to 5 Keys + Facility Code, Wiegand 26-Bit ................. 20

7.5.6 Option 6: 6 Keys BCD and Parity Bits, Wiegand 26-Bit .................. 21

7.5.7 Option 8: 1 to 8 Keys BCD, Clock & Data ..................................... 22

7.5.8 Option 9: Single Key, Wiegand 4-Bit ............................................. 23

7.6 Changing the Programming Code .......................................... 23

Table of Contents

iv AY-G/H6xx0 Installation and User Manual

7.7 Changing the Facility Code .................................................... 23

7.8 Setting the Backlight Behavior ............................................... 24

7.9 Return to Factory Default Settings .......................................... 25

7.10 Replacing a lost Programming Code ....................................... 25

8. OSDP Operation ......................................................... 26

A. Wiegand Output Formats ......................................... 27

A.1 Rules for Wiegand 26-Bit (26A) .............................................. 28

A.2 Rules for Wiegand 38-Bit (38A) .............................................. 30

B. Declaration of Conformity........................................ 32

C. Limited Warranty ...................................................... 33

List of Figures

AY-G/H6xx0 Installation and User Manual v

List of Figures

Figure 1: Mounting.......................................................................................... 11

List of Tables

vi AY-G/H6xx0 Installation and User Manual

List of Tables

Table 1: Wiring ................................................................................................ 12

Table 2: Reader Programming Menu ............................................................... 16

Table 3: Keypad Transmission Format .............................................................. 18

Table 4: Bit Description Table .......................................................................... 27

Introduction

AY-G/H6xx0 Installation and User Manual vii

Notice and Disclaimer

This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product, and/or software
described herein.

B

EFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM, THE INSTALLER AND THE

USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES

.

 The system must not be used for purposes other than those for which it

was designed.

 The use of the software associated with the system and/or product, if

applicable, is subject to the terms of the license provided as part of the
purchase documents.

 ROSSLARE exclusive warranty and liability is limited to the warranty and

liability statement provided in an appendix at the end of this document.

 This manual describes the maximum configuration of the system with the

maximum number of functions, including future options. Therefore, not all
functions described in this manual may be available in the specific system
and/or product configuration you purchased.

 Incorrect operation or installation, or failure of the user to effectively

maintain the system, relieves the manufacturer (and seller) from all or any
responsibility for consequent noncompliance, damage, or injury.

 The text, images and graphics contained in the manual are for the purpose

of illustration and reference only.

 All data contained herein subject to change without prior notice.

 In no event shall manufacturer be liable for any special, direct, indirect,

incidental, consequential, exemplary or punitive damages (including,
without limitation, any and all damages from business interruption, loss of
profits or revenue, cost of capital or loss of use of any property or capital or
injury).

 All graphics in this manual are for reference only, some deviation between

the image(s) and the actual product may occur.

 All wiring diagrams are intended for reference only, the photograph or

graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).

Introduction

8 AY-G/H6xx0 Installation and User Manual

1. Introduction

The Open to Secure™ (O2S®) family of readers are multi-format
contactless smart card readers for use in access control system
solutions.

The AY-x6x70 readers support reading O2S ID data and the CSN from
MIFARE Plus

®

and MIFARE® Classic EV1 credentials.

The AY-x6x80 readers support reading O2S ID Data and the CSN from
MIFARE

®

DESFire® EV1 and MIFARE Classic EV1 credentials.

O2S ID data is stored in the secure memory of the MIFARE credential.
O2S ID data is AES 128-bit encrypted during transmission to the
reader for MIFARE Plus and DESFire EV1 credentials.

1.1 Box Content

Before beginning, verify that all of the following is in the box. If
anything is missing, please report the discrepancy to your nearest
Rosslare office.

 One O2S reader
 Installation kit – Includes two wall plugs, two mounting screws,

security Torx screw, and security Torx screw tool

 Installation and operating instructions

Technical Specifications

AY-G/H6xx0 Installation and User Manual 9

2. Technical Specifications

Electrical
Characteristics

AY-G H6xx0

Power Supply Type

Linear (recommended)

Operating Voltage Range

6 to 16 VDC

Current @ 12 V

Standby: 85 mA
Maximum: 110 mA

Read Range for G Models*

MIFARE Classic EV1: 40 to 45 mm (1.5 to 1.8
in.)

MIFARE Plus: 25 mm (1 in.)
MIFARE DESFire EV1: 25 mm (1 in.)

Read Range for H Models*

MIFARE Classic EV1: 40 to 45 mm (1.5 to 1.8
in.)

MIFARE Plus: 30 mm (1.2 in.)
MIFARE DESFire EV1: 30 mm (1.2 in.)

LED Control Input 1**

Green LED control, TTL

LED Control Input 2**

Red LED control, TTL

Auxiliary Input**

Buzzer control, TTL

Auxiliary Output**

Tamper output (open collector, active low,
max. sink current 30 mA)

Maximum Cable Distance
to Controller

Wiegand: 150 m (500 ft) with 18-AWG cable
OSDP (RS-485): 1200 m (4,000 ft) with 2x2

18-AWG twisted shielded cable

Environmental Characteristics

Operating Temp. Range

-31°C to 63°C (-24°F to 145°F)

Operating Humidity Range

0 to 95% (non-condensing)

Outdoor Usage

Weather-resistant, meets IP65, epoxy-potted,
suitable for indoor and outdoor use

* Measured using Rosslare O2S ISO cards. Range also depends on

electrical environment and proximity to metal.

** Standard configuration. Custom configurations are available.

Technical Specifications

10 AY-G/H6xx0 Installation and User Manual

Physical Characteristics

Dimensions of Pigtail
Models

(H x W x D)

AY-G6xx0: 145.3 x 42.0 x 23.0 mm
(5.7 x 1.7 x 0.9 in.)

AY-H6xx0: 120.0 x 80.0 x 23.0 mm
(4.7 x 3.2 x 0.9 in.)

Dimensions of Terminal
Block and OSDP Models

(H x W x D)

AY-G6xx0: 145.3 x 42.0 x 31.0 mm
(5.7 x 1.7 x 1.2 in.)

AY-H6xx0: 120.0 x 80.0 x 31.0 mm
(4.7 x 3.2 x 1.2 in.)

Weight of Pigtail Models

AY-G6270: 155 g (5.5 oz)

AY-G6280: 153 g (5.4 oz)

AY-G6370: 236 g (8.3 oz)

AY-G6380: 231 g (8.1 oz)

AY-H6270: 161 g (5.7 oz)

AY-H6280: 168 g (5.9 oz)

AY-H6370: 220 g (7.8 oz)

AY-H6380: 218 g (7.7 oz)

Weight of Terminal Block
and OSDP Models

AY-G6270: 144 g (5.1 oz)

AY-G6280: 135 g (4.8 oz)

AY-G6370: 218 g (7.7 oz)

AY-G6380: 219 g (7.7 oz)

AY-H6270: 147 g (5.2 oz)

AY-H6280: 144 g (5.1 oz)

AY-H6370: 196 g (6.9 oz)

AY-H6380: 201 g (7.1 oz)

Mounting

AY-G/H6xx0 Installation and User Manual 11

3. Mounting

To mount the units:

1. Determine an approximate location for the reader.

2. Peel off the back of the self-adhesive mounting label template
and place it at the required mounting location.

3. Using the template as a guide, drill two holes (sizes indicated on
the template) used for mounting the back plate onto the surface
(Figure 1).

Figure 1: Mounting

AY-GXXXX

AY-HXXXX

4. Insert a suitable wall plug into each screw hole.

5. Drill a 10-mm (7/16”) hole for the cable.

6. Screw the back plate onto the wall.

7. Connect the reader to the controller (see Chapter 4). A linear
type power supply is recommended.

8. Attach the reader to the back plate and secure the reader to the
back plate with the provided security screw and tools.