Rosslare MD-08B Installation And User Manual

MD-08B

Programming Interface for Smartcard Readers

Installation and User Manual

1

1. Introduction

The Rosslare's MD-08B MIFARE® Reader Programmer is used to set the
Wiegand output format of MIFARE read-only readers, while setting the
input control of the reader to either buzzer or LED control.

Figure 1: MD-08B

2. Technical Specifications

Electrical Characteristics

Operating Voltage

12 VDC

Input Current

500 mA

Cable

RS-232 serial cable

Data Specifications

Reader

AY-M25, AY-W6350, AY-W6250, AY-K25,
AY-H25, AY-Q6250, and AY-Q6350

Software Requirements

Programmer Application

MIFARE Reader v0.05.00

3. Connections

3.1 Connecting the MD-08B to the
Computer

Connect the MD-08B to a COM port in the computer using the RS-232
cable.

3.2 Connecting the Reader to the MD-08B

Connect the reader to the MD-08B according to the following wiring:

 Red to +12V

 Black to (-)
 Green to D0

 White to D1

If the reader comes with a Molex connector, connect it to JP4.

4. Software Application

4.1 Starting the Software

1. Connect the reader to the MD-08B.

2. Run the MIFARE Reader Programmer application.

The

Mifare Reader Programmer

window opens (Figure 2):

Figure 2: The Mifare Reader Programmer

3. In Communication Settings, set Com Port to the port that the

MD-08B is connected to.

4.2 Setting Rosslare Mifare® Reader's
Transmission Format and LED Control
Input

1. In Program options, set the parameters that you want to change in

the reader. For example, you can set Transmit format to
Wiegand 32-bit, and LED control input to Green LED.

2. Disconnect the MD-08B from the power.

3. Click the Program button to set the reader.

4. Reconnect the MD-08B to the power by connecting the Power

plug.

If the programming was successful, the

Finish

window opens

(Figure 3).

Figure 3: Finish Window

2

Limited Warranty

The full ROSSLARE Limited Warranty Statement is available in the Quick
Links section on the ROSSLARE website at www.rosslaresecurity.com

.

Rosslare considers any use of this product as agreement to the
Warranty Terms even if you do not review them.

Contact Information

United States and Canada

Rosslare Security Products, Inc.
Southlake, TX, USA
Toll Free: [phone]
Local: [phone]
Fax: [phone]
[e-mail]

Europe

Rosslare Israel Ltd.
Rosh HaAyin, Israel
Tel: [phone]
Fax: [phone]
[e-mail]

Latin America

Rosslare Latin America
Buenos Aires, Argentina
Tel: [phone]
[e-mail]

China

Rosslare Electronics (Shenzhen) Ltd.
Shenzhen, China
Tel: [phone]
Fax: [phone]
[e-mail]

Asia Pacific, Middle East, Africa

Rosslare Enterprises Ltd.
Kowloon Bay, Hong Kong
Tel: [phone]
Fax: [phone]
[e-mail]

India

Rosslare Electronics India Pvt Ltd.
Tel/Fax: [phone]
Mobile: [phone]
[e-mail]

www.rosslaresecurity.com

0706-0960184+02