Rosslare HomeLogix HLX-40, HomeLogix HLX-40B, HomeLogix HLX-40A User Manual
2012
May
HLX-40/40A/40B
Advanced Wireless Security Panel
User Manual
Copyright © 2012 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to REL, RSP Inc. and/or
their related companies and/or subsidiaries’ (hereafter:”ROSSLARE”). Only ROSSLARE
and its customers have the right to use the information.
No part of this manual may be re-produced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of
ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights, or other
intellectual property rights covering the subject matter in this manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN THIS
DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS AND OTHER
LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND TRANSMITTAL TO THIRD
PARTIES WITHOUT EXPRESS WRITTEN PERMISSION MAY RESULT IN LEGAL
PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any third party any
license to these patents, trademarks, copyrights or other intellectual property rights,
except as expressly provided in any written agreement of ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any time, without
being obliged to announce such revisions or changes beforehand or after the fact.
Table of Contents
HomeLogiX™ HLX-40 Software Manual iii
Table of Contents
1. Introduction ..................................................................... 10
1.1 Remote PC Activities ......................................................................... 10
2. Installing HR-P02 ............................................................. 11
2.1 System Requirements ........................................................................ 11
2.1.1 Hardware Requirements ............................................................................ 11
2.1.2 Software Requirements .............................................................................. 11
2.1.3 Ancillary Equipment ................................................................................... 11
2.2 Installing the Software ...................................................................... 11
3. Getting Started ............................................................... 13
3.1 Basic Concepts ................................................................................. 13
3.2 Running the Software ....................................................................... 13
3.3 HR-P02 HomeLogiX-40 Main Window .............................................. 14
3.4 Configuring the System .................................................................... 15
3.4.1 General Options ........................................................................................ 15
3.4.2 Communication Options ............................................................................ 19
3.5 Main Panel Tasks .............................................................................. 22
4. Creating and Managing Panel Accounts ...................... 24
4.1 Creating a Panel Group..................................................................... 24
4.2 Creating a New Panel Account .......................................................... 24
4.3 Saving the Configuration .................................................................. 25
4.4 Changing an Existing Panel Account ................................................. 26
4.5 Deleting a Panel Account .................................................................. 27
5. Editing a Panel Account ................................................. 28
5.1 Account Information ......................................................................... 28
5.2 Zones ............................................................................................... 29
5.3 Enrollment ........................................................................................ 30
5.4 Security ............................................................................................ 31
Table of Contents
iv HomeLogiX™ HLX-40 Software Manual
5.5 Communications .............................................................................. 34
5.6 Automation ...................................................................................... 38
5.6.1 Automation Settings .................................................................................. 38
5.6.2 PGM Number (#) ....................................................................................... 38
5.7 Messages .......................................................................................... 39
6. Communicating with the Panel ..................................... 40
6.1 Setting the Panel Authorization Code ............................................... 40
6.2 Uploading from a Panel .................................................................... 40
6.3 Downloading to a Panel .................................................................... 42
6.4 Refreshing the Properties .................................................................. 43
6.5 Uploading the Date and Time from a Panel ....................................... 43
6.6 Downloading the Date and Time to a Panel....................................... 44
6.7 Restoring the Panel to Factory Defaults ............................................. 45
6.8 Disconnecting a Panel ....................................................................... 46
6.9 Resetting a Panel .............................................................................. 46
6.10 Updating Firmware ........................................................................... 47
6.11 Signal Strength Test .......................................................................... 47
7. Viewing System Information ........................................ 49
7.1 Viewing the Panel Account Properties ............................................... 49
7.2 Viewing the System Status ................................................................ 49
7.3 Applying Actions via the PC .............................................................. 50
7.3.1 Arming Home ........................................................................................... 50
7.3.2 Arming Away ............................................................................................ 50
7.3.3 Disarming ................................................................................................. 51
7.3.4 Bypassing Zone ......................................................................................... 51
7.3.5 Restoring Bypassed Zone ........................................................................... 51
7.3.6 Turning PGM On ....................................................................................... 51
7.3.7 Turning PGM OFF ...................................................................................... 51
7.4 Refreshing the Panel Manually .......................................................... 51
7.5 Refreshing the Panel Automatically ................................................... 51
7.6 Viewing the Event Log ...................................................................... 52
Table of Contents
HomeLogiX™ HLX-40 Software Manual v
8. Performing Database Backup ........................................ 54
8.1 Backing up the Database .................................................................. 54
8.2 Restoring the Database ..................................................................... 54
A. Limited Warranty ............................................................ 55
List of Figures
vi HomeLogiX™ HLX-40 Software Manual
List of Figures
Figure 1: Select Target Window .................................................................... 12
Figure 2: Login Window ............................................................................... 13
Figure 3: Change Login Details Dialog .......................................................... 13
Figure 4: HomeLogiX-40 Remote Programmer Window ................................ 14
Figure 5: Main Window with Pane Accounts ................................................. 15
Figure 6: Miscellaneous Options ................................................................... 16
Figure 7: User Login Options ........................................................................ 17
Figure 8: User Information Window .............................................................. 17
Figure 9: Language Options .......................................................................... 18
Figure 10: System View Options ................................................................... 18
Figure 11: Local Communication Options ..................................................... 19
Figure 12: Communication Options via Modem ............................................ 19
Figure 13: Communication Options via GPRS: Client Mode ........................... 20
Figure 14: Communication Options via GPRS: Server Mode........................... 21
Figure 15: Communication Options via TCP .................................................. 22
Figure 16: Right Mouse Menu – Add New Panel Group ................................ 24
Figure 17: Add New Panel Group ................................................................. 24
Figure 18: New Panel Account ...................................................................... 25
Figure 19: Status Bar – Panel Saved .............................................................. 25
Figure 20: Status Bar – Panel Modified.......................................................... 26
Figure 21: Upload Account Window ............................................................. 41
Figure 22: Retrieving Panel Information Window .......................................... 41
Figure 23: Upload Preview Window .............................................................. 42
Figure 24: Download Window ...................................................................... 43
Figure 25: Upload Date and Time Office Window ......................................... 44
Figure 26: Download Date and Time Office Window .................................... 44
Figure 27: Download Date and Time Office Window – Sync Date/Time with PC
Unchecked .................................................................................. 45
Figure 28: Restore Panel to Factory Defaults Window ................................... 45
Figure 29: Reset Panel .................................................................................. 47
Figure 30: Update Firmware ......................................................................... 47
Figure 31: Signal Strength Test ..................................................................... 48
Figure 32: Signal Strength Test Result Table .................................................. 48
List of Figures
HomeLogiX™ HLX-40 Software Manual vii
Figure 33: View System Status ...................................................................... 50
Figure 34: Refreshing Automatically.............................................................. 52
Figure 35: View Event Log ............................................................................ 53
Figure 36: Restore Backup Warning Window ................................................ 54
List of Tables
viii HomeLogiX™ HLX-40 Software Manual
List of Tables
Table 1: HomeLogiX-40 Remote Programmer Window ................................. 15
Table 2: General Options – Miscellaneous Screen .......................................... 16
Table 3: Communication Options – Remote Via Modem Screen .................... 20
Table 4: Communication Options – Remote Via GPRS Screen ........................ 21
Table 5: Communication Options – Remote Via GPRS Screen ........................ 22
Table 6: Account Properties Available for Editing .......................................... 26
Table 7: Editing a Panel – Account Information ............................................. 28
Table 8: Editing a Panel – Zones ................................................................... 29
Table 9: Editing a Panel – Enrollment ............................................................ 30
Table 10: Editing a Panel – Security .............................................................. 31
Table 11: Editing a Panel – Communications ................................................. 34
Table 12: Editing a Panel – Messages ............................................................ 39
Notice and Disclaimer
HomeLogiX™ HLX-40 Software Manual ix
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product, and/or software
described herein.
B
EFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM, THE INSTALLER AND
THE USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES
.
The system must not be used for purposes other than those for which it
was designed.
The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of the
purchase documents.
ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or
subsidiaries’ (hereafter:"ROSSLARE") exclusive warranty and liability is
limited to the warranty and liability statement provided in an appendix at
the end of this document.
This manual describes the maximum configuration of the system with the
maximum number of functions, including future options. Therefore, not
all functions described in this manual may be available in the specific
system and/or product configuration you purchased.
Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or any
responsibility for consequent noncompliance, damage, or injury.
The text, images and graphics contained in the manual are for the
purpose of illustration and reference only.
In no event shall manufacturer be liable for any special, direct, indirect,
incidental, consequential, exemplary or punitive damages (including,
without limitation, any and all damages from business interruption, loss of
profits or revenue, cost of capital or loss of use of any property or capital
or injury).
All graphics in this manual are for reference only, some deviation between
the image(s) and the actual product may occur.
All wiring diagrams are intended for reference only, the photograph or
graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).
Introduction
10 HomeLogiX™ HLX-40 Software Manual
1. Introduction
The HomeLogiX-40 Remote Programmer (referred to as HR-P02) is a software
application designed to support installers of the HLX-40 as well as the
HomeLogiX-40 family of Wireless Panel (referred to as wireless panel). HR-P02
allows its users to define the configuration for a wireless panel, edit the
configuration, and download it to the wireless panel. HR-P02 displays currently
defined wireless panels, as well as the properties of each panel.
HR-P02 allows the installer to upload the current wireless panel configuration
and make changes. The installer can then download the new configuration to
the wireless panel.
The wireless panel can be connected to HR-P02 either directly via an RS-232
cable and Rosslare's MD-62 (RS-232 converter), or remotely using a modem.
See the Alarm Panel’s Installer Guide for more details on connecting the
wireless panel to HR-P02.
1.1 Remote PC Activities
The following are remote PC activities that can be performed via the HR-P02
PC Software:
Arming away
Arming home
Disarming
Setting a bypass to a zone
Removing a bypass indication from a zone
Turning on or off a PGM device
Panel configuration and settings
HR-P02 now enables remote actions when the panel is armed.
Installing HR-P02
HomeLogiX™ HLX-40 Software Manual 11
2. Installing HR-P02
This chapter lists system requirements for the HR-P02 and describes how to
install HR-P02.
2.1 System Requirements
The following are the minimum system requirements needed to install the
software.
2.1.1 Hardware Requirements
Pentium 4 or later
Minimum 256MB RAM
100MB available hard disk space
One available serial COM port
2.1.2 48BSoftware Requirements
Microsoft Windows XP or higher
2.1.3 49BAncillary Equipment
Rosslare’s MD-N33 or a similar third party modem
A telephone cable (2-wire to RJ-11) for working in remote mode
Rosslare's MD-62 to RS-232 converter
2.2 10BInstalling the Software
This section describes how to install HR-P02.
To install HR-P02:
1. From the CD provided, double-click the HomeLogiX-40 Setup.exe file.
Files necessary for HomeLogiX-40 are extracted. A dialog appears asking
you to confirm starting the HomeLogiX-40 Remote Programmer setup.
2. Click OK.
The HomeLogiX-40 Remote Programmer Setup Wizard opens.
3. Click Next.
The
Select Installation Folder
window opens.
Installing HR-P02
12 HomeLogiX™ HLX-40 Software Manual
Figure 1: Select Target Window
You can click Disk Cost to see a list of the drives onto which you can install
HomeLogiX-40 Remote Programmer, along with each drive's size, available
space, and the required space.
4. Indicate for whom you are installing the HomeLogiX-40 Remote
Programmer:
a. Select Everyone to install for anyone who uses the computer
b. Select Just me (default) to install for yourself only
5. Click Next.
The Installation Confirmation window opens.
6. Click Next to begin the installation.
The installation begins.
When HomeLogiX-40 Remote Programmer has been successfully installed,
the Installation Complete window opens.
7. Click Close to exit the installation.
The HomeLogiX-40 Remote Programmer Setup window opens, indicating
that the setup succeeded.
8. Click OK.
The HR-P02 installation is complete.
Getting Started
HomeLogiX™ HLX-40 Software Manual 13
3. Getting Started
This chapter explains what you need to know before using HR-P02.
3.1 Basic Concepts
HR-P02 is a Microsoft Windows application used to manage wireless panels
installed in various locations. The user creates a panel account for each owner
of a wireless panel. The panel account holds all the configuration information
for a specific wireless panel. The configuration can then be downloaded to the
wireless panel via a direct connection to the PC, or remotely using a modem.
The user can also connect to a wireless panel to check its live status, its event
log, and to make changes to the configuration.
3.2 Running the Software
This section explains how to run HR-P02. The first procedure describes running
HR-P02 the first time you use it and how to change your user name and
password. The second procedure describes how to run HR-P02 each time
thereafter.
To run HR-P02 the first time:
1. From the Start menu, select Programs > Rosslare > HomeLogiX-40
Remote Programmer > HomeLogiX-40 Remote Programmer.
The
HLX Family Login
window opens, with the default User Name
“master” and Password “xxxxxxxx” displayed.
Figure 2: Login Window
2. Delete the password and click OK.
The
User Information
dialog box appears.
Figure 3: Change Login Details Dialog
Getting Started
14 HomeLogiX™ HLX-40 Software Manual
3. Type your new User Name, Current Password, and New Password.
Confirm your new password in Confirm New Password.
4. Click OK.
A confirmation window opens.
5. Click OK.
The application starts up and the HR-P02 HomeLogiX-40 Remote
Programmer window appears (see Section 3.3).
To run HR-P02:
1. From the Start menu, select Programs > Rosslare > HomeLogiX-40
Remote Programmer > HomeLogiX-40 Remote Programmer.
The Login window opens.
2. Enter your User Name and Password.
3. Click OK.
The HomeLogiX-40 Remote Programmer main window appears (see
Section 3.3).
3.3 HR-P02 HomeLogiX-40 Main Window
The HR-P02 main window is used as a central place for accessing all the
available features and options (Figure 4).
Figure 4: HomeLogiX-40 Remote Programmer Window
Getting Started
HomeLogiX™ HLX-40 Software Manual 15
The HomeLogiX-40 Remote Programmer window contains the following areas:
Table 1: HomeLogiX-40 Remote Programmer Window
Menu bar
Provides access to main options.
Toolbar
Provides quick access to frequently used operations.
Panel Tree
Contains the panel accounts and groups already defined
in the system.
Properties Area
Displays properties of the current selection in the left
pane.
Assistance bar
Provides assistance by displaying a short description of the
field in the Properties Area that you are viewing or editing.
Status bar
Displays the current communication status of the system.
Figure 5 shows two panel accounts that have been defined in the system.
Panel accounts are listed in the panel tree on the left. The Properties Area on
the right displays the properties of the selected panel.
Figure 5: Main Window with Pane Accounts
3.4 Configuring the System
This section describes the configuration options available for your HR-P02
application. You can set the options by selecting Tools > Options from the
Menu bar.
3.4.1 General Options
The general options include these sections:
Miscellaneous
User Login
Languages
System View
Getting Started
16 HomeLogiX™ HLX-40 Software Manual
3.4.1.1 Miscellaneous
Figure 6: Miscellaneous Options
In the Miscellaneous options, you can set automatic save time, enable session
logging, set idle time before logout, and warnings for long remote
connections.
Table 2: General Options – Miscellaneous Screen
Option Description
Automatic Save of
Panel Data
Set how often to automatically save the panel account data.
Session Logging Set whether to enable session logging.
Idle Time Before
Logout
Set after how much idle time to automatically log out. This option
is only available under Microsoft Windows 2000/XP.
Long remote
connection
Warnings
Set the time to warn of a long remote connection, and how often
to display a warning.
3.4.1.2 User Login
In the User Login options, you can change your user name and password.
Getting Started
HomeLogiX™ HLX-40 Software Manual 17
Figure 7: User Login Options
To change the user login information:
1. In the User Login options, type the current user name and password, and
then click Change.
The
User Information
window opens.
Figure 8: User Information Window
2. Enter the new user name and password.
3. Confirm the new password and click OK.
The user name and password are changed.
3.4.1.3 Languages
In this version of HR-P02, English and Spanish are the only supported
languages.
Getting Started
18 HomeLogiX™ HLX-40 Software Manual
Figure 9: Language Options
To select the user interface language:
1. In the Languages option, select your preferred user interface language.
2. Click OK.
3.4.1.4 System View
In the System View options, you can set whether to update information
continuously from a wireless panel or to perform a single retrieval of
information from the wireless panel. This option is used when a wireless panel
is directly connected to HR-P02 via a cable. If you set the retrieval to be
continuous, you can also set the frequency of retrievals in seconds.
Figure 10: System View Options
To select the mode of retrieval:
1. In System View options, select Single Retrieval or Continuous
Retrieval.
Loading...