DR-6280
To install the driver for all cables:
Open to Secure Desktop Reader
User Manual
1. Introduction
The DR-6280 is an advanced MIFARE Classic® EV1 and MIFARE®
®
DESFire
EV1 O2S Desktop Reader. It reads the O2S ID Data and CSN
and transmits it to connected access control software, such as
Rosslare’s AxTraxNG™.
It has a slim and attractive design and is built for convenience and
portability. With its USB computer interface, it is quick and easy to
install and runs without any additional power source. Designed to sit
safely on any desktop, the DR-6280 is sturdily built, with surfacegripping rubber feet.
1.1 Features
Contactless Smart Card Reader (13.56 MHz)
Meets ISO14443 Type A Standard
AES 128‐ bit encryption during transmission MIFARE DESFire EV1
Reads O2S ID data from O2S credentials
Reads CSN of non‐O2S Credentials
Bi-Colored LED
Supports USB 2.0 Standard (compatible with USB 1.1), meets the
EIA Standard
Driver supports the following Operating Systems:
Windows 7 32- and 64-Bit, Windows Vista, and Vista 64-Bit,
Windows XP and XP 64-Bit, Server 2003, XP and Server 2008,
Windows XP Embedded, Windows CE 4.2, 5.0 and 6.0, Mac
OS-X
2. Technical Specifications
2.1 Electrical Characteristics
Operating Voltage Range
Standby Current
Max. Operation Current
Supported Transponders
Read Card Distance
RF Modulation
Operation Frequency
Bit Rate
Output Formats
5 VDC (USB powered)
87 mA
135 mA
MIFARE Classic EV1
MIFARE DESFire EV1
Up to 5 cm
ASK
13.56 MHz
106 kHz
All output formats per the O2S card
presented to reader
Figure 1: DR-6280
2.2 Environmental Characteristics
Operating Environment
Operating Temperature Range
Storage Temperature Range
Relative Humidity Range
Indoor use
0°C to 63°C (32°F to 145°F)
-20°C to 63°C (-4°F to 145°F)
0 to 95% (non-condensing)
2.3 Physical Characteristics
Weight
Dimensions (L x W x H)
130 g (4.6 oz)
123 x 70 x 16.2 mm (4.9 x 2.8 x 0.6 in.)
3. Installing the USB Driver
To download the driver, please refer to
http://www.rosslaresecurity.com
1. Go to http://www.rosslaresecurity.com.
2. Click
3. In
4. Click the Download icon.
5. Double-click the installation file: CDM20824_Setup.
Downloads
Document Types
After a few moments, a completion message appears and the
window closes.
in the Quick Links section.
, select Driver and click Search.
4. Enrolling Cards using AxTraxNG
You must use the AxTraxNG software to enroll cards.
Please refer to Appendix J in the
User Manual
.
AxTraxNG™ Software Installation and
This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The full ROSSLARE Limited Warranty Statement is available in the Quick
Links section on the ROSSLARE website at www.rosslaresecurity.com.
Rosslare considers any use of this product as agreement to the
Warranty Terms even if you do not review them.
radio frequency energy and, if not installed
Contact Information
United States and Canada
Rosslare Security Products, Inc.
Southlake, TX, USA
Toll Free: +1-866-632-1101
Local: +1-817-305-0006
Fax: +1-817-305-0069
support.na@rosslaresecurity.com
Europe
Rosslare Israel Ltd.
Rosh HaAyin, Israel
Tel: +972-3-938-6838
Fax: +972-3-938-6830
support.eu@rosslaresecurity.com
Latin America
Rosslare Latin America
Buenos Aires, Argentina
Tel: +54-11-4001-3104
support.la@rosslaresecurity.com
China
Rosslare Electronics (Shenzhen) Ltd.
Shenzhen, China
Tel: +86-755-8610-6842
Fax: +86-755-8610-6101
support.cn@rosslaresecurity.com
Asia Pacific, Middle East, Africa
Rosslare Enterprises Ltd.
Kowloon Bay, Hong Kong
Tel: +852-2795-5630
Fax: +852-2795-1508
support.apac@rosslaresecurity.com
India
Rosslare Electronics India Pvt Ltd.
Tel/Fax: +91-20-40147830
Mobile: +91-9975768824
sales.in@rosslaresecurity.com