Rosslare AS-36, SA-36H, SA-36G, SA-36W Installation Instructions Manual

Page 1
AS-36/SA-36G/H/W
Installation Instructions Maximum Heat Detector
0706-0960267+00
1. Introduction
The AS-36 maximum h eat detector sounds an al arm whenever the unit temperature reaches 55±2ºC. The unit is supplementary to smoke detectors and should be placed only in areas wher e smoke detectors cannot be used. AS-36 is operated by a single 9V battery, which can sustain the unit’s operation for up to 1 year.
AS-36 has an 85-decibel horn, test button , and an alarm LED indicator. The AS-36 heat detector is ideal for kitchens, garages, cellars, boiler rooms, attics and other areas where there are normally high levels of fumes, smoke or dust which preclude the use of smoke detectors due to the risk of false alarms.
The detector can connect to Rosslare's security system panel, or to any standard wireless security system. To connect the AS-36 Maximum heat detector to a wired or wireless system, mount it on Rosslare's SA-13G (wireless; 433.92MHz), SA-13H (wireless, 868.35MHz), or SA-13W (wired) base.
NOTE: A fully mounted unit (AS-36 + SA-13G/H/W) is referred to as SA-36G/H (wireless) or SA-36W (wired).
NOTE:
The AS-36 maximum heat detector is not designed to serve as a substitute for a primary fire detection system.
Figure 1: AS-36 Unit
2. Technical Specifications
2.1 Electrical Characteristics
AS-36 Detector Current:
Maximum alarm: 150 mA
Standby: 10 µA
SA13G/H Base Current:
Transmitting: 16 mA
Standby: 16 µA
Transmitting distance: up to 200m in open
space
SA13W Base Current:
Operating: 7 mA
NO output: Standby: 10 mA
NC output: Standby: 21 mA
Operating: 23 mA
Battery: 1604A (9V Alkaline) Battery Life: 1 year Low Battery Detection:
Last 7 days of battery life
2.2 Environmental Characteristics
Use Environment: Indoor Operating Temperature: 0º–60ºC (32º–140º F) Operating Humidity:
2.3 Physical Characteristics
10% to 90% non-condensing
Sensitivity: Alarm temperature 55±2ºC Alarm Indication: LED and siren Indicators Siren Volume: 85dB at 3m (10ft) Dimensions: AS-36: 118.4 x 107 x 40 mm
4.66 x 4.21 x 1.57 inch SA-36G/H 126.5 x 124 x 63.7 mm
4.98 x 4.88 x 2.5 inch SA-36W: 121 x 112.6 x 58.5 mm
4.76 x 4.43 x 2.3 inch
Weight:
SA-36W: 176g (6.2 oz)
AS-36: 130g (4.59oz)
SA-36G/H: 291.3g (10.27 oz)
3. Installation
The SA-36 is a heat detector; it can be operated as a standalone unit or as an alarm system together with the SA-13 wireless or wired base.
3.1 Wiring the SA-36W
For wiring instillations follow the instructions below.
To set and wire the SA-36W:
1. set the alarm output setting to either Normally Open or Normally Closed using the select switch on the SA-13W.
2. Connect the power between the Security Alarm system and the SA-13W’s Vin and ground terminal blocks.
3. Connect the Tamper outputs to the Security Alarm system’s inputs
4. Connect the Alarm terminal blocks to the Security Alarm system, refe r to the installation manual of the alarm system you are connecting the detec to r to.
Page 2
0706-0960267+00
Figure 2: Wiring Diagram
3.2 Mounting the Detector
Before mounting the AS-36 Heat Detector, make sure that your chosen mounting area is not in fro nt of any electrical wiring or pipe work.
To mount the unit:
1. Mark two mounting points in the wall according to the base size and holes.
2. Drill into the marke d p o ints and insert wall plugs.
3. Using screws, mount the base onto the wall.
4. Mount the AS-36 unit on the base (see Figure 3).
Note: Be careful not to over-tighten the screws.
Figure 3: Mounting AS-36 on the Base Unit NOTE:
4. Operating the Heat Detector
Do not paint or cover the detector.
4.1 General Use
During normal operation, the heat detector's LED indicator should flash once per 40 seconds.
When the unit detects heat (the temperatu re reaches 55±2ºC or more), it triggers its built-in sire n . I f the detector is connected to a wireless or wired security network, it sends an alert message to the host security pan el.
4.2 Testing the Detector
To test the heat de tector, press and hold the se lf-test button. A loud pulsating siren sounds and the LED indicator flashes
quickly, wh ile a signal is emitted to the host control panel (if part of a system).
4.3 Low battery
When the detector' s battery is low, the detector beeps once per 40 seconds. The heat detector continues oper ating with a low battery for at least 7 days.
Figure 4: Test button
AS-36 Sta ndalone
SA-36 G/H Wireless Base
SA-36W Wired Base
Page 3
0706-0960267+00
5. Limited Warranty
ROSSLARE ENTERPRISES LIMITED S (ROSSLARE) TWO YEAR LIMITED WARRANTY IS APPLICABLE WORLDWIDE. THIS WARRANTY
SUPERSEDES ANY OTHER WARRANTY. ROSSLARE'S TWO YEAR LIMITED
WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS:
W
ARRANTY OF ROSSLARE'S PRODUCTS EXTENDS TO T HE ORIGINAL PURCHASER (CUSTOMER) OF THE ROSSLARE PRODUCT AND IS NOT TRANSFERABLE.
Warranty
ROSSLARE ENTERPRISES LTD. AND / ORSUBSIDIARIES (ROSSLARE) WARRANTS THAT THE AS-36 HEAT DETECTOR, TO BE FREE
FROM DEFECTS IN MATERIALS AND ASSEMBLY IN THE COURSE OF NORMAL U SE AND SERVICE. THE WARRANTY PERIOD COMMENCES WITH THE DATE OF SHIPMENT TO THE ORIGINAL PURCHASER AND EXTENDS FOR A PERIOD OF 2 YEARS (24 MONTHS).
Products Covered By This Warranty and Duration
IN THE EVENT OF A BREACH OF WARRANTY, ROSSLARE WILL CREDIT CUSTOMER WITH THE PRICE OF THE PRODUCT PAID BY CUSTOMER, PROVIDED
THAT THE WARRANTY CLAIM IS DELIVERED TO ROSSLARE BY THE CUSTOMER DURING THE WARRANTY PERIOD IN ACCORDANCE WITH THE TERMS OF THIS WARRANTY. UNLESS OTHERWI SE REQUESTED BY ROSSLARE
ENTERPRISES LTD. AND / OR SUBSIDIARIES REPRESENTATIVE, RETURN
OF THE FAILED PRODUCT(S) IS NOT IMMEDIATELY REQUIRED.
Warranty Remedy Coverage
IF ROSSLARE HAS NOT CONTACTED THE CUSTOMER WITHIN A SIXTY (60) DAY
HOLDING PERIOD FOLLOWING THE DELIVERY OF THE WARRANTY CLAIM,
CUSTOMER WILL NOT BE REQUIRED TO RETURN THE FAILED PRODUCT(S). ALL
RETURNED PRODUCT(S), AS MAY BE REQUESTED AT ROSSLARE
ENTERPRISES LTD. AND /OR SUBSIDIARY’S SOLE DISCRETION, SHALL
BECOME THE PROPERTY OF ROSSLARE ENTERPRISES LTD. AND /OR
SUBSIDIARIES. T
O EXERCISE THE WARRANTY, THE USER MUST CONTACT ROSSLARE
ENTERPRISES LTD. TO OBTAIN AN RMA NUMBER AFTER WHICH, THE PRODUCT
MUST BE RETURNED TO THE MANUFACTURER FREIGHT PREPAID AND INSURED
I
N THE EVENT ROSSLARE CHOOSES TO PERFORM A PRODUCT EVALUATION WITHIN THE SIXTY (60) DAY HOLDING PERIOD AND NO DEFECT IS FOUND, A MINIMUM US$ 50.00 OR EQUIVALENT CHARGE WILL BE APPLIED TO EACH
PRODUCT FOR LABOR REQUIRED IN THE EVALUAT ION. R
OSSLARE WILL REPAIR OR REPLACE, AT ITS DISCRETION, ANY PRODUCT THAT
UNDER NORMAL CONDITIONS OF USE AND SERVI CE PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP. NO CHARGE W ILL BE APPLIED FOR LABOR OR PARTS WITH RESPECT TO DEFECTS COVERED BY THIS WARRANTY, PROVIDED THAT THE WORK IS DONE BY ROSSLARE OR A ROSSLARE AUTHO RIZED SERVICE CENTER.
ROSSLARE
SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY DAMAGE OR
LOSS RESULTING FROM T HE OPERATION OR PERFORMANCE OF ANY PRODUCT OR ANY SYSTEMS IN WHICH A PRODUCT IS INCORPORATED. THIS WARRANTY SHALL NOT EXTEND TO ANY ANCILLARY EQUIPMENT NOT FURNISHED BY
ROSSLARE, WHICH IS ATTACHED TO OR USED IN CONJUNCTION WITH A PRODUCT, NOR TO ANY PRODUCT THAT IS USED W ITH ANY ANCILLARY
EQUIPMENT, WHICH IS NOT FURNISHED BY ROSSLARE.
Exclusions and Limitations
THIS WARRANTY DOES NOT COVER EXPENSES INCURRED IN THE
TRANSPORTATION, FREIGHT COST TO THE REPAIR CENTER, REMOVAL OR REINSTALLATION OF THE PRODUCT, WHETHER OR NOT PROVEN DEFECTIVE.
S
PECIFICALLY EXCLUDED FROM THIS WARRANTY ARE ANY FAILURES RES ULTING
FROM CUSTOMER'S IMPROPER TESTING, OPERATION, INSTALLATION, OR DAMAGE RESULTING FROM USE OF THE PRODUCT IN OTHER THAN ITS NORMAL AND CUSTOMARY MANNER, OR ANY MAINTENANCE, MODIFICATION, ALTERATION, OR ADJUSTMENT OR ANY TYPE OF ABUSE, NEGLECT, ACCIDENT, MISUSE, IMPROPER OPERATION, NORMAL WEAR, DEFECTS O R DAMAGE DUE TO LIGHTNING OR OTHER ELECTRICAL DISCHARGE. THIS WARRANTY DOES NOT COVER REPAIR OR REPLACEMENT WHERE NORMAL USE HAS EXHAUSTED THE LIFE OF A PART OR INSTRUMENT, OR ANY MODIFICATION OR ABUSE OF, OR TAMPERING WITH, THE PRODUCT IF PRODUCT DISASSEMBLED OR REPAIRED IN SUCH A MANNER AS TO ADVERSELY AFFECT PERFORMANCE OR PREVENT ADEQUATE INSPECTION AND TESTING TO VERIFY ANY WARRANTY CLAIM.
ROSSLARE
DOES NOT WARRANT THE INSTALLATION, MAINTENANCE, OR
SERVICE OF THE PRODUCT. SERVICE L IFE OF THE PRODUCT IS DEPENDENT UPON THE CARE IT RECEIVES AND THE CO NDITIONS UNDER WHICH IT HAS TO OPERATE.
I
N NO EVENT SHALL ROSSLARE BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
THIS WARRANTY SETS FO RTH THE FULL EXTENT OF ROSSLARE ENTERPRI SES LTD. AND ITS SUBSIDIARIES WARRANTY.
Limited Warranty Terms
99BTHE TERMS OF THIS WAR RANTY MAY NOT BE VARIED BY ANY PERSON, WHETHER
OR NOT PURPORTING TO REPRESENT OR ACT ON BEHALF OF ROSSLARE.
100BTHIS LIMITED WARRANTY IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES. ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFIC ALLY EXCLUDED.
101BIN NO EVENT SHALL ROSSLARE BE LIABLE FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF T HE PRODUCT, OR FOR ANY OTHER INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF USE, LOSS OF TIME, COMMERCIAL LOSS, INCONVENIENCE, AND LOSS OF PROFITS, ARISING OUT OF THE INSTALLATION, USE, OR INABILITY TO USE SUCH PRODUCT, TO THE FULLEST EXTENT THAT ANY SUCH LOSS OR DAMAGE MAY BE DISCLAIMED BY LAW.
102BTHIS WARRANTY SHALL BECOME NULL AND VOID IN THE EVENT OF A VIOLATION
OF THE PROVISIONS OF THIS LIMITED WARRANTY.
6. 26BContact Information
35BAsia Pacific, Middle East, Africa 39BHeadquarters:
9B905-912 Wing Fat Industrial Bldg, 12 Wang Tai Road,
Kowloon Bay HK
10BTel:+852 2795-5630 Fax: +852 2795-1508 11BE-mail: support.apac@rosslaresecurity.com
36BUnited States and Canada 12B1600 Hart Court, Suite 103 Southl ake, TX, USA 76092 13BToll Free:+1-866-632-1101 Local:+1-817-305-0006 Fax: +1-
817-305-0069
14BE-mail: support.na@rosslaresecurity.com
37BEurope 40BGlobal Technical Support & Training Center:
15BHaMelecha 22 Rosh HaAyin, Israel 48091 16BTel: +972 3 938-6838 Fax: +972 3 938-6830 17BE-mail: support.eu@rosslaresecurity.com
38BSouth America 18BPringles 868, 1640 Martinez Buenos Aires Argentina 19BTel: +54 11 4798-0095 Fax: +54 11 4798-2228
20BWeb Site: www.rosslaresecurity.com
Loading...