Rosslare ACF4X, ACG4X User Manual
AC-F/G4x Series
Outdoor Backlit
Standalone Controllers
Models:
Installation and Programming
Manual
AC-F43
AC-F44
AC-G43
AC-G44
Copyright © 2018 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to
ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or
subsidiaries’ (hereafter: "ROSSLARE"). Only ROSSLARE and its customers
have the right to use the information.
No part of this manual may be re-produced or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the
express written permission of ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights,
or other intellectual property rights covering the subject matter in this
manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT
IN THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT
LAWS AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE,
REPRODUCTION, AND TRANSMITTAL TO THIRD PARTIES WITHOUT
EXPRESS WRITTEN PERMISSION MAY RESULT IN LEGAL PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any
third party any license to these patents, trademarks, copyrights or other
intellectual property rights, except as expressly provided in any written
agreement of ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any
time, without being obliged to announce such revisions or changes
beforehand or after the fact.
Table of Contents
1. Introduction ............................................................. 11
2. Technical Specifications ............................................ 14
3. Installation .............................................................. 16
4. Operation ................................................................ 23
Table of Contents
1.1 Controller Types ...................................................................................... 11
1.2 Box Content .............................................................................................. 12
1.3 Ancillary Equipment ............................................................................... 12
3.1 Mounting ................................................................................................... 16
3.2 Wiring .......................................................................................................... 18
4.1 Modes of Operation .............................................................................. 23
4.1.1 Normal Mode ............................................................................................... 23
4.1.2 Secure Mode ................................................................................................. 23
4.1.3 Bypass Mode ................................................................................................. 24
4.2 User Levels................................................................................................. 24
4.3 Switching Operational Modes ........................................................... 26
4.3.1 From Normal to Secure Mode .............................................................. 26
4.3.2 From Secure to Normal Mode .............................................................. 26
4.3.3 From Normal to Bypass Mode .............................................................. 27
AC-F/G4x Series Installation and Programming Manual iii
Table of Contents
5. Programming ........................................................... 31
4.3.4 From Bypass to Normal Mode .............................................................. 27
4.4 Auxiliary Input and Output ................................................................. 28
4.5 REX Function ............................................................................................. 28
4.6 Tamper Feature ....................................................................................... 29
4.7 Lockout Feature (Keypad/Card Tamper) ....................................... 29
4.8 BL-D40 External Sounder ..................................................................... 30
5.1 Entering the Programming Mode .................................................... 33
5.2 Exiting the Programming Mode ....................................................... 33
5.3 Changing the Open Code ................................................................... 34
5.4 Changing the Auxiliary Code ............................................................. 36
5.5 Changing the Programming Code .................................................. 37
5.6 Changing the Normal/Secure Code ................................................ 38
5.7 Changing the Normal/Bypass Code ................................................ 38
5.8 Setting Fail Safe/Secure Operation ................................................. 40
5.9 Setting Auxiliary Modes ....................................................................... 41
5.9.1 Auxiliary Mode 0 ......................................................................................... 45
5.9.2 Auxiliary Mode 1 ......................................................................................... 45
5.9.3 Auxiliary Mode 2 ......................................................................................... 46
5.9.4 Auxiliary Mode 3 ......................................................................................... 46
5.9.5 Auxiliary Mode 4 ......................................................................................... 47
iv AC-F/G4x Series Installation and Programming Manual
Table of Contents
5.9.6 Auxiliary Mode 5 ......................................................................................... 47
5.9.7 Auxiliary Mode 6 ......................................................................................... 48
5.9.8 Auxiliary Mode 7 ......................................................................................... 48
5.9.9 Auxiliary Mode 8 ......................................................................................... 49
5.9.10 Auxiliary Mode 9 ......................................................................................... 50
5.10 Setting the Lockout Feature ............................................................... 50
5.11 Setting the Backlight Behavior .......................................................... 52
5.12 Enrolling Primary and Secondary Codes ....................................... 53
5.12.1 Primary Codes Definition ......................................................................... 53
5.12.2 Secondary Codes Definition ................................................................... 53
5.12.3 Enrolling Methods ....................................................................................... 54
5.13 Deleting Primary and Secondary Codes ........................................ 58
5.13.1 Deleting Primary and Secondary Codes using the Standard
Method ............................................................................................................ 58
5.13.2 Deleting Primary and Secondary Codes using the Code Search
Method ............................................................................................................ 59
5.14 Relay Codes Assignment ..................................................................... 60
5.14.1 Relay Code Assignment using Standard Method .......................... 61
5.14.2 Relay Code Assignment using Search Method .............................. 62
5.15 Changing PIN Code Length/Factory Default Settings ............. 64
5.16 Replacing a Programming Code ...................................................... 65
AC-F/G4x Series Installation and Programming Manual v
Table of Contents
A. Declaration of Conformity ......................................... 67
B. Limited Warranty ...................................................... 68
5.17 Replacing a Normal/Secure Code .................................................... 66
vi AC-F/G4x Series Installation and Programming Manual
List of Figures
List of Figures
Figure 1: Drilling Holes Identification ........................................................................ 17
Figure 2: Wiring Diagram for Lock Strike Relay and REX .................................. 20
Figure 3: Wiring Diagram for Auxiliary Input & Output .................................... 21
Figure 4: Wiring Diagram for the BL-D40 External Sounder ............................ 22
AC-F/G4x Series Installation and Programming Manual vii
List of Tables
List of Tables
Table 1: Wiring Color Guide .......................................................................................... 18
Table 2: Programming Menus....................................................................................... 31
Table 3: Quick Reference Guide for Auxiliary Mode Setting ........................... 43
viii AC-F/G4x Series Installation and Programming Manual
Introduction
BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM, THE INSTA LLER AND THE
USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY
REQUIREMENTS AND OPERATING PROCEDURES.
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe
and efficient installation and usage of the system and/or product, and/or
software described herein.
The system must not be used for purposes other than those for
which it was designed.
The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of
the purchase documents.
ROSSLARE exclusive warranty and liability is limited to the warranty
and liability statement provided in an appendix at the end of this
document.
This manual describes the maximum configuration of the system with
the maximum number of functions, including future options.
Therefore, not all functions described in this manual may be available
in the specific system and/or product configuration you purchased.
Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or
any responsibility for consequent noncompliance, damage, or injury.
The text, images and graphics contained in the manual are for the
purpose of illustration and reference only.
AC-F/G4x Series Installation and Programming Manual 9
Introduction
All data contained herein subject to change without prior notice.
In no event shall manufacturer be liable for any special, direct,
indirect, incidental, consequential, exemplary or punitive damages
(including, without limitation, any and all damages from business
interruption, loss of profits or revenue, cost of capital or loss of use
of any property or capital or injury).
All graphics in this manual are for reference only, some deviation
between the image(s) and the actual product may occur.
All wiring diagrams are intended for reference only, the photograph
or graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).
10 AC-F/G4x Series Installation and Programming Manual
Introduction
1.1
Controller Types
Relay
Current
Backlight
Keypad
Type
Proximity
1. Introduction
The AC-F4x series and AC-G4x series access control units are
waterproof standalone controllers. All the units are suitable for
both indoor and outdoor mounting. The unit(s) accepts up to
500 users and allows entry via a personal identification number
(PIN) and/or by presenting a proximity card.
The different types of control units described in this manual are:
AC-F43 – PIN only
AC-F44 – PIN and proximity card
AC-G43 – Mullion-Box PIN only
AC-G44 – Mullion-Box PIN and proximity card
AC-F43 2 A
AC-F44 2 A
AC-G43 2 A
AC-G44 2 A
AC-F/G4x Series Installation and Programming Manual 11
3x4 Standard
3x4 Standard
2x6 Mullion
2x6 Mullion
Introduction
1.2
Box Content
1.3
Ancillary Equipment
Before beginning, verify that all of the following is in the box. If
anything is missing please report the discrepancy to your nearest
Rosslare Office.
One unit
Installation kit
1 drilling template (label/sticker)
1 security spline key
1 security hex screw
4 mounting screws and wall plugs
The following ancillary equipment may be required to complete
your installation:
Electric Lock Strike Mechanism – fail safe (power to lock) or
fail secure (power to open).
Power supply with backup battery – 12 to 24 VDC (from a
regulated power supply) or 16 to 24 VAC (from a
transformer).
Request to Exit (REX) Button (optional) – normally open type;
switch is closed when pressed.
12 AC-F/G4x Series Installation and Programming Manual
Introduction
BL-D40 external sounder (optional) – provides siren, bell, and
chime.
Magnetic contact (optional) – installed for door monitor
capabilities.
Other Rosslare accessories can be found at Rosslare's website:
www.rosslaresecurity.com
AC-F/G4x Series Installation and Programming Manual 13
Technical Specifications
AC-F43
AC-F44
AC-G43
AC-G44
ASK at 125
ASK at 125
26 Bits EM
26 Bits EM
2. Technical Specifications
Input
Voltage
Maximum Input Current
(12 VDC)
Standby Input Current
(12 VDC)
Maximum Relay Current 2 A
REX Input Normally Open (dry contact)
Aux. Input Normally Open (dry contact)
Max. Proximity Read
Range*
Proximity Modulation N/A
Proximity Card
Compatibility
LED Indicators Two 3-colored LED (Mode and Door)
Operating Temp. Range -30°C to 65°C (-22°F to 150°F)
Operating Humidity
Range
Outdoor Usage Weather resistant, meets IP65, epoxy-potted
VDC 12 to 24 VDC
VAC 16 to 24 VAC
125 mA 160 mA 125 mA 160 mA
75 mA 95 mA 75 mA 95 mA
N/A 75 mm
(3.0 in.)
kHz
N/A
cards
0 to 95% (non-condensing)
N/A 80 mm
N/A
N/A
(3.2 in.)
kHz
cards
14 AC-F/G4x Series Installation and Programming Manual
Technical Specifications
AC-F43
AC-F44
AC-G43
AC-G44
Size (H x W x D) 120.9 x 71.1 x 29.7
mm (4.7 x 2.8 x 1.2 in.)
Weight 244 g (8.6 oz) 178 g (6.3 oz)
* Measured using a Rosslare proximity card or equivalent. Range also
depends on electrical environment and proximity to metal.
135.4 x 44.2 x 28.5
mm (5.3 x 1.7 x 1.1 in.)
AC-F/G4x Series Installation and Programming Manual 15
Installation
Installation of an RFID reader adjacent to metallic surfaces
might alter the reader’s
interference, use a plastic spacer when mounting the reader.
3.1
Mounting
To install the controller:
3. Installation
specifications. To diminish this
Prior to starting, select the location where the controller unit is
to be mounted.
1. Peel off the back of the self-adhesive mounting label
template and place it on the required mounting location.
2. At the bottom of the unit’s case, remove the screw.
3. Carefully remove the snap-off front cover of the unit to
reveal the screw holes.
4. Depending on the type of installation, gang box or panel
mount, drill the respective holes in the rear cover (Figure 1).
16 AC-F/G4x Series Installation and Programming Manual
Installation
The unit can also be mounted using strong epoxy glue.
After application, firmly hold the unit in place until the glue
dries
Figure 1: Drilling Holes Identification
7
5. Drill an additional 10-mm (
/16”) hole for the cable. When
installing the reader on a metallic surface, cover the inside of
the hole with a grommet or electrical tape.
6. Insert the unit’s cable wire into the cable hole and wire the
unit as described in Section 3.2.
7. Screw the back plate into the surface. Ensure the screws are
the size specified on the installation template.
.
8. Carefully re-attach the front cover of the unit.
9. Secure the front cover by using the supplied security Torx
screw. A Torx security screw tool is provided to tighten the
security Torx screw.
AC-F/G4x Series Installation and Programming Manual 17
Installation
3.2
Wiring
To wire the controller:
Color
Description
The unit is supplied with a 10-conductor 100-cm (40-in.) pigtail
(18-AWG cable) with exposed wires coated with solder.
1. Select the appropriate connections according to Table 1.
Table 1: Wiring Color Guide
Red V input
Black Ground
Green REX/BL
White In / Monitor
Purple Lock: Com
Gray Lock: N.O.
Brown Lock: N.C.
Blue Aux: Com
Yellow Aux: N.O.
Orange Aux: N.C.
2. Prepare the secured power supply’s cable by cutting the
cable jacket back 3.2 cm (1¼”) and strip the wire 1.3 cm
(½”).
18 AC-F/G4x Series Installation and Programming Manual
Installation
3. Splice the controller pigtail wires to the corresponding
ancillary devices and insulate each connection, including
unused wires. Refer to the wiring diagrams, depending on
the desired application:
Wiring the lock strike relay and REX (Figure 2)
Wiring for auxiliary input and output (Figure 3)
Wiring for the BL-D40 external sounder (Figure 4)
AC-F/G4x Series Installation and Programming Manual 19
Installation
Figure 2: Wiring Diagram for Lock Strike Relay and REX
20 AC-F/G4x Series Installation and Programming Manual
Installation
Figure 3: Wiring Diagram for Auxiliary Input & Output
AC-F/G4x Series Installation and Programming Manual 21
Loading...