How it Works
Ross Controls
Loading...
GENERAL PURPOSE FILTERS
User Manual
8 pgs744.72 Kb0

Ross Controls GENERAL PURPOSE FILTERS User Manual

Download
Ports: 1/8 to 1/4
A
0 2.5
0
5 7.5 10 12.515 17.5
Flow to 30 scfm
BANTAM Filters
FEATURES:
• Modular assembly and mounting
• Threaded ports or quick-connect ttings for tubing up to 10 mm in diameter
• High-strength polycarbonate plastic lter bowl; optional metal bowl
bar
0.35
0.28
0.21
0.14
0.07
0
FLOW
Automatic Drain
psi
psi
5 4
3
2
1
PRESSURE DROP
0
scfm
scfm
l/s
l/s
STANDARD 5-µm ELEMENT
Inlet Pressure 100 psig (6.9 bar)
0
05
C
B
ISO Symbols
Filter
Manual Drain
FLOW CHART
10 15 20 25 30 35 40
Port DIMENSIONS inches (mm) Weight
Size A B † C Depth lb (kg)
No Port 1.7 (43) 3.6 (92) 0.5 (13) 1.8 (45) 0.27 (0.12) 1/8, 1/4 3.0 (76) 3.6 (92) 0.5 (13) 1.8 (45) 0.49 (0.22)
Models below have quick-connect fittings for tubing. 1/4 3.4 (86) 3.6 (92) 0.5 (13) 1.8 (45) 0.47 (0.21)
3/8 3.9 (99) 3.6 (92) 0.5 (13) 1.8 (45) 0.47 (0.21) 4 mm 3.4 (86) 3.6 (92) 0.5 (13) 1.8 (45) 0.47 (0.21) 6 mm 3.4 (86) 3.6 (92) 0.5 (13) 1.8 (45) 0.47 (0.21) 8 mm 3.1 (79) 3.6 (92) 0.5 (13) 1.8 (45) 0.47 (0.21) 10 mm 3.9 (99) 3.6 (92) 0.5 (13) 1.8 (45) 0.47 (0.21)
† Dimension for polycarbonate plastic bowl; metal bowl is 3.8 (97).
Port Air Flow Automatic Drain Models Manual Drain Models
Size scfm (l/s) Plastic Bowl Metal Bowl Plastic Bowl Metal Bowl 1/8 30 (14.1) 5B01B0100 5B01B0200 5B01B0300 5B01B0400
1/4 30 (14.1) 5B02B0100 5B02B0200 5B02B0300 5B02B0400
WITH TUBE FITTINGS:
1/4 30 (14.1) 5B03B0100 5B03B0200 5B03B0300 5B03B0400 3/8 30 (14.1) 5B04B0100 5B04B0200 5B04B0300 5B04B0400 4mm 30 (14.1) 5B05B0100 5B05B0200 5B05B0300 5B05B0400 6mm 30 (14.1) 5B06B0100 5B06B0200 5B06B0300 5B06B0400 8mm 30 (14.1) 5B07B0100 5B07B0200 5B07B0300 5B07B0400
10mm 30 (14.1) 5B08B0100 5B08B0200 5B08B0300 5B08B0400
REPLACEMENT FILTER ELEMENT KITS & BOWLS
Element Rating/Type Kit Number 5-µm polyethylene - Standard 933K77
Bowl T ype Kit Number
Plastic - Automatic 920K77 Plastic - Manual 921K77 Metal - Automatic R-ABFD130-22 Metal - Manual R-ABF130-22
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C). Metal bowl: 40° to 150°F (4° to 66°C).
Body: Acetal. Bowl: 2-ounce (60-ml) capacity polycarbonate plastic; optional
aluminum bowl.
Bowl Drain: Internal automatic drain; optional manual drain. Filter Element: 5-micron rated polyethylene. Fluid Media: Compressed air.
Inlet Pressure:
For automatic drain model: With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar). With metal bowl: 15 to 200 psig (1.0 to 13.8 bar). For manual drain model: With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar). With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile. Threads: NPT standard, BSPP. For BSPP threads, add a “C”
prefix to the model number, e.g., C5B01B0100.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
6 © 2012, ROSS CONTROLS.
All Rights Reserved.
Ports: 1/8 & 1/4
A
Flow to 23 scfm
MINIATURE Filters
FEATURES:
• Inline mounting
• High-strength polycarbonate plastic lter bowl; optional metal bowl
C
bar
0.35
0.28
0.21
0.14
0.07
0
FLOW
Automatic Drain
psi
5 4
3
2
1
PRESSURE DROP
0
scfm
scfm
l/s
l/s
STANDARD 5-µm ELEMENT
Inlet Pressure 100 psig (6.9 bar)
1/8
05 0 2.5
B
ISO Symbols
Filter
Manual Drain
FLOW CHART
1/4
10 15 20 25 30 35 40
5 7.5 10 12.5 15 17.5
Bowl Port
DIMENSIONS inches (mm)
Weight
Type Size A B C Depth lb (kg)
Plastic 1/8, 1/4 1.6 (41) 3.6 (92) 0.4 (9.5) 1.6 (41) 0.33 (0.15) Metal 1/8, 1/4 1.6 (41) 4.3 (109) 0.4 (9.5) 1.6 (41) 0.35 (0.16)
Port Air Flow Automatic Drain Models Manual Drain Models
Size scfm (l/s) Plastic Bowl Metal Bowl Plastic Bowl Metal Bowl
1/8 11 (5.2) 5021B1010 5022B1010 5011B1010 5012B1010
1/4 23 (10.8) 5021B2010 5022B2010 5011B2010 5012B2010
REPLACEMENT FILTER ELEMENT KITS & BOWLS
Element Rating/Type Kit Number 5-µm polyethylene - Standard 933K77
Bowl T ype Kit Number
Plastic - Automatic 920K77 Plastic - Manual 921K77 Metal - Automatic R-ABFD130-22 Metal - Manual R-ABF130-22
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C). Metal bowl: 40° to 150°F (4° to 66°C).
Body: Aluminum. Bowl: 2-ounce (60-ml) capacity polycarbonate plastic; optional
aluminum bowl.
Bowl Drain: Internal automatic drain; optional manual drain. Filter Element: 5-micron rated polyethylene.
Inlet Pressure:
For automatic drain model: With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar). With metal bowl: 15 to 200 psig (1.0 to 13.8 bar). For manual drain model: With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar). With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile. Threads: NPT standard, BSPP. For BSPP threads, add a “C”
prefix to the model number, e.g., C5021B1010.
Fluid Media: Compressed air.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
www.rosscontrols.com 7
Ports: 1/4, 3/8, 1/2
A
FLOW CHART
Flow to 75 scfm
MID-SIZE Filters
FEATURES:
• Modular or inline mounting
• High-strength polycarbonate plastic lter bowl with zinc shatterguard;
optional zinc bowl
• Internal automatic drain; optional manual drain
C
bar
0.35
0.28
0.21
0.14
0.07
0
FLOW
Automatic Drain
psi
5 4
3
2
1
PRESSURE DROP
0
scfm
l/s
STANDARD 5-µm ELEMENT
Inlet Pressure 100 psig (6.9 bar)
010
0 0 5
0
B
ISO Symbols
Filter
Manual Drain
1/4
3/8
20 30 40 50 60 70 80
10 15 20 25 30 35
1/2
Bowl Port DIMENSIONS inches (mm) Weight
Type Size A B C Depth lb (kg)
Plastic 1/4 – 1/2 2.7 (67) 4.8 (122) 0.6 (16) 2.4 (60) 1.13 (0.51) Metal 1/4 – 1/2 2.7 (67) 4.9 (123) 0.6 (16) 2.4 (60) 1.50 (0.68)
Port Air Flow Automatic Drain Models Manual Drain Models
Size scfm (l/s) Plastic Bowl* Metal Bowl Plastic Bowl* Metal Bowl 1/4 45 (21.2) 5021B2007 5022B2007 5011B2007 5012B2007
3/8 65 (30.7) 5021B3027 5022B3027 5011B3026 5012B3026 1/2 75 (35.4) 5021B4007 5022B4007 5011B4007 5012B4007
*Plastic bowls include metal bowl guard.
REPLACEMENT FILTER ELEMENT KITS & BOWLS
Element Rating/Type Kit Number 5-µm polyethylene - Standard 933K77
Bowl T ype Kit Number
Plastic - Automatic 924K77 Plastic - Manual 925K77 Metal - Automatic R-AB60FD-12 Metal - Manual R-AB60F-12
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C). Metal Bowl: 40° to 175°F (4° to 79°C).
Body: Zinc. Bowl: 4-ounce (120-ml) capacity polycarbonate plastic with zinc
shatterguard; optional zinc bowl. Bowl Drain: Internal automatic drain; optional manual drain.
For optional internal float drain (on metal bowl only), consult ROSS.
Filter Element: 5-micron rated polyethylene.
Fluid Media: Compressed air. Inlet Pressure:
For automatic drain model: With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar). With metal bowl: 15 to 200 psig (1.0 to 13.8 bar). For manual drain model: With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar). With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile. Threads: NPT standard, BSPP. For BSPP threads, add a “C”
prefix to the model number, e.g., C5021B2007.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
8 © 2012, ROSS CONTROLS.
All Rights Reserved.
FLOW CHART
Ports: 1/4 to 3/4
Flow to 155 scfm
A
FULL-SIZE Filters
FEATURES:
• Modular or inline mounting
• High-strength polycarbonate plastic lter bowl with steel shatterguard;
optional metal bowl with clear nylon sight glass
• Optional differential pressure gauge
• Internal automatic drain; optional manual drain or external automatic drain
C
bar
0.35
0.28
0.21
0.14
0.07
FLO
psi
5
4
3
2
1
PRESSURE DROP
0
0
scfm
0
020
W
l/s
0 10
0
ISO Symbols
Filter
Automatic Drain
STANDARD 5-µm ELEMENT
Inlet Pressure 100 psig (6.9 bar)
1/4
3/8
40 60 80 100 120 140 160
20 30 40 50 60 70
1/2
B
Manual Drain
3/4
Bowl Port DIMENSIONS inches (mm) Weight † Type Size A B † C Depth lb (kg)
Plastic 1/4 – 3/4 3.5 (89) 5.8 (146) 0.6 (16) 3.5 (89) 1.93 (0.88) Metal 1/4 – 3/4 3.5 (89) 6.4 (163) 0.6 (16) 3.5 (89) 2.90 (1.32)
† With automatic external drain, dimension B is increased by 8.0 inches (203 mm), and weight is increased by 2.56 pounds (1.16 kg).
Port Air Flow Automatic Drain Models Manual Drain Models
Size scfm (l/s) Plastic Bowl Metal Bowl Plastic Bowl Metal Bowl 1/4 45 (21.3) 5021B2008 5022B2005 5011B2008 5012B2006
3/8 85 (40.1) 5021B3008 5022B3005 5011B3008 5012B3006 1/2 130 (61.3) 5021B4008 5022B4005 5011B4008 5012B4006 3/4 155 (73.1) 5021B5018 5022B5015 5011B5018 5012B5016
REPLACEMENT FILTER ELEMENT KITS & BOWLS
Element Rating/Type Kit Number 5-µm polyethylene - Standard 933K77
Bowl T ype Kit Number
Plastic - Automatic 926K77 Plastic - Manual 927K77 Metal - Automatic R-ABFD130-117 Metal - Manual R-ABF130-117
DIFFERENTIAL PRESSURE GAUGES
Small
Slide Gauge
R-K103-151
Large Dual
Face Gauge
R-106-35
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C). Metal bowl: 40° to 175°F (4° to 79°C).
Body: Zinc. Bowl: 8-ounce (240-ml) capacity polycarbonate plastic with steel
shatterguard; optional zinc bowl with clear nylon sight glass. Bowl Drain: Internal automatic drain; optional manual drain or external automatic drain. For optional internal float drain (on polycarbonate plastic bowl only), consult ROSS.
Bowl Ring: Aluminum. Differential Pressure Gauge: Optional, consult ROSS.
Filter Element: 5-micron rated polyethylene. Fluid Media: Compressed air. Inlet Pressure:
For automatic drain model: With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar). With metal bowl: 15 to 200 psig (1.0 to 13.8 bar). For manual drain model: With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar). With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile. Threads: NPT standard, BSPP. F or BSPP threads, add a “C” prefix
to the model number, e.g., C5021B2008.
Large Dual Face Gauge
with Reed Switch
R-106-35E (Normally Open)
R-106-35EC (Normally Closed)
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
www.rosscontrols.com 9
FLOW CHARTS
MD4
TM
Filters
Ports: 3/8, 1/2, 3/4
Flow to 205 scfm
FEATURES:
• Modular or inline mounting
• Polycarbonate plastic bowl with steel
shatterguard; optional metal bowl with sight glass
A
C
• Optional differential pressure gauge
• Gold cap color; optional gray, yellow, red, or blue
• Internal automatic drain; optional manual drain,
automatic external drain, or electronic drain
Bowl
B
Automatic Drain
DIMENSIONS inches (mm)
ISO Symbols
Filter
Manual Drain
Weight
Type A B † C Depth lb (kg)
Plastic 3.5 (88) 7.7 (195) 1.1 (28) 2.9 (73) 2.13 (0.97) Metal 3.5 (88) 7.6 (193) 1.1 (28) 3.1 (79) 2.13 (0.97)
† Bowl removal clearance: add 3.1 (79).
REPLACEMENT FILTER ELEMENT KITS
Element Rating/Type Kit Number 5-µm - Standard R-A115-106PE5
40-µm - Optional R-A115-106PE3
MD4 50P B A B 5 2 L
BOWL SIZE
50P - 9 oz Polycarbonate Bowl 50M - 9 oz Metal Bowl
BOWL DRAIN
A - Auto Drain M - Manual Drain E - Electronic Drain - available in metal bowl version only H - Automatic External Drain - available in metal bowl version only L - Less Drain Fitting - 1/4 NPT female instead F - Internal float drain
ELEMENT TYPE
A - 40 µm - Optional B - 5 µm - Standard
HOW T O ORDER
PIPE SIZE
3 - 3/8 NPTF 4 - 1/2 NPTF 5 - 3/4 NPTF C - 3/8 BSPP D - 1/2 BSPP E - 3/4 BSPP F - 3/4-16 SAE G - 7/8-14 SAE
bar
0.35
0.28
0.21
0.14
0.07
bar
0.35
0.28
0.21
0.14
0.07 0
bar
0.35
0.28
0.21
0.14
0.07 0
0
FLOW
COLOR
G - Gray Y - Yellow R - Red B - Blue 2 - Gold - Standard
psi
5 4 3 2 1
PRESSURE DROP
00
psi
5 4 3 2 1
PRESSURE DROP
0
psi
5 4 3 2 1
PRESSURE DROP
0
0
0
40 60 80 100 120 140 160 180 200 220
20
scfm
l/s
l/s
0 10
0
STANDARD 5-µm ELEMENT
Inlet Pressure psig (bar)
20 30 40 50 60 70 80 90 100
DIFFERENTIAL PRESSURE GAUGE
A - No Gauge L - Large Gauge S - Small Gauge E - Large Gauge with Normally Open Reed Switch C - Large Gauge with Normally Closed Reed Switch
150(10.3)92(6.3)36(2.5)
3/8 Ports
1/2 Ports
3/4 Ports
DIFFERENTIAL PRESSURE GAUGES
Small
Slide Gauge
R-K103-151
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C). Metal bowl: 40° to 175°F (4° to 79°C).
Body: Die-cast zinc. Bowl: 9-ounce (270-ml) capacity polycarbonate plastic with steel
shatterguard; optional aluminum bowl with clear nylon sight glass. Bowl Drain: Internal automatic drain, by removing the adjustment knob, a 3/16” (5mm) flexible tube can be connected to the drain; optional manual drain, external automatic drain, or electronic drain. For optional internal float drain (on polycarbonate plastic bowl only), consult ROSS.
Bowl Ring: Nylon.
Large Dual
Face Gauge
R-106-35
Differential Pressure Gauge: Optional. Filter Element: 5-micron rated polyethylene; for optional 40-micron
element, consult ROSS.
Fluid Media: Compressed air. Inlet Pressure:
For automatic drain model: With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar). With metal bowl: 15 to 200 psig (1.0 to 13.8 bar). For manual drain model: With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar). With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile Threads: NPT standard, BSPP, SAE.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
10 © 2012, ROSS CONTROLS.
Large Dual Face Gauge
with Reed Switch
R-106-35E (Normally Open)
R-106-35EC (Normally Closed)
All Rights Reserved.
Ports: 3/4 & 1
FLOW CHARTS
Flow to 275 scfm
HIGH-CAPACITY Filters
FEATURES:
• Inline mounting
• High-strength polycarbonate plastic lter bowl with steel shatterguard;
A
C
optional metal bowl with clear nylon sight glass
• Optional differential pressure gauge
• Internal automatic drain; optional manual drain or external automatic drain
bar
0.35
0.28
0.21
0.14
0.07
0
FLOW
Automatic Drain
psi
5 4
3
2
1
PRESSURE DROP
0
scfm
l/s
l/s
STANDARD 5-µm ELEMENT
Inlet Pressure 100 psig (6.9 bar)
0
050 0 25
0
B
ISO Symbols
Filter
Manual Drain
3/4
1
100 150 200 250 300 350 400
50 75 100 125 150 175
Bowl Port
DIMENSIONS inches (mm)
Weight †
Type Size A B † C Depth lb (kg)
Plastic 3/4, 1 4.5 (114) 8.0 (203) 0.8 (21) 4.2 (106) 2.44 (1.11) Metal 3/4, 1 4.5 (114) 8.3 (210) 0.8 (21) 4.2 (106) 3.25 (1.48)
† With automatic external drain, dimension B is increased by 8.0 inches (203 mm), and weight is increased by 2.56 pounds (1.16 kg).
Port Air Flow Automatic Drain Models Manual Drain Models
Size scfm (l/s) Plastic Bowl* Metal Bowl Plastic Bowl* Metal Bowl 3/4 250 (118.0) 5021B5008 5022B5005 5011B5008 5012B5006
1 275 (129.8) 5021B6008 5022B6005 5011B6008 5012B6006
*Plastic bowls include metal bowl guard.
REPLACEMENT FILTER ELEMENT KITS & BOWLS
Element Rating/Type Kit Number
5-µm polyethylene - Standard 1010K77
Bowl T ype Kit Number
Plastic - Automatic 928K77 Plastic - Manual 929K77 Metal - Automatic R-ABFD109-6A Metal - Manual R-ABF109-6A
DIFFERENTIAL PRESSURE GAUGES
Small
Slide Gauge
R-K103-151
Large Dual
Face Gauge
R-106-35
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C). Metal Bowl: 40° to 175°F (4° to 79°C).
Body: Aluminum. Bowl: 16-ounce (480-ml) capacity polycarbonate plastic with steel
shatterguard; optional aluminum bowl with clear nylon sight glass. Bowl Drain: Internal automatic drain; optional manual drain or external automatic drain. For optional internal float drain (on polycarbonate plastic bowl only), consult ROSS.
Bowl Ring: Aluminum. Differential Pressure Gauge: Optional, consult ROSS.
Filter Element: 5-micron rated polyethylene. Fluid Media: Compressed air. Inlet Pressure:
For automatic drain model: With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar). With metal bowl: 15 to 200 psig (1.0 to 13.8 bar). For manual drain model: With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar). With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile. Threads: NPT standard, BSPP. F or BSPP threads, add a “C” prefix
to the model number, e.g., C5021B5008.
Large Dual Face Gauge
with Reed Switch
R-106-35E (Normally Open)
R-106-35EC (Normally Closed)
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
www.rosscontrols.com 11
Ports: 1¼ & 1½
FLOW CHARTS
Flow to 660 scfm
A
C
HIGH-CAPACITY Filters
FEATURES:
• Inline mounting
• Aluminum bowl with clear nylon sight glass
• Optional differential pressure gauge
• Internal automatic drain; optional manual drain or external drain
bar
bar
0.35
0.35
0.28
0.28
0.21
0.21
0.14
0.14
0.07
0.07
0
0
FLOW
FLOW
bar
bar
0.35
0.35
0.28
0.28
0.21
0.21
0.14
0.14
0.07
0.07 0
0
FLOW
FLOW
psi
psi
PRESSURE DROP
PRESSURE DROP
scfm
scfm
l/s
l/s
psi
psi
PRESSURE DROP
PRESSURE DROP
scfm
scfm
l/s
l/s
STANDARD 40-µm ELEMENT Inlet Pressure 100 psig (6.9 bar)
5
5 4
4
3
3
2
2
1
1
0
0
0
0 100 0 50
0
OPTIONAL 5-µm ELEMENT
5
5 4
4
3
3
2
2
1
1
0
Inlet Pressure 100 psig (6.9 bar)
0 100
0 0 50
0
B
1-1/4
200 300 400 500 600 700 800
100 150 200 250 300 350
200 300 400 500 600 700 800
100 150 200 250 300 350
1-1/2
ISO Symbols
Filter
Bowl
Automatic Drain
DIMENSIONS inches (mm)
Manual Drain
Weight †
Type A B † C Depth lb (kg)
Plastic 5.5 (140) 10.6 (269) 1.4 (36) 4.2 (106) 4.50 (2.04) Metal 5.5 (140) 10.7 (271) 1.4 (36) 4.2 (106) 4.50 (2.04)
† With automatic external drain, dimension B is increased by 8.0 inches (203 cm), and weight is increased by 2.56 pounds (1.16 kg).
Port Air Flow Automatic Drain Models Manual Drain Models
Size scfm (l/s) Metal Bowl Metal Bowl 1¼ 290 (136.9) 5-µm 5022B7019 5012B7019
1¼ 630 (297.3) 40-µm 5X00B7051 5X00B7052 1½ 290 (136.9) 5-µm 5022B8019 5012B8019 1½ 660 (311.5) 40-µm 5X00B8037 5X00B8051
REPLACEMENT FILTER ELEMENT KITS
Element Rating/Type Kit Number
40-µm bronze - Standard R-A114-106E3 5-µm bronze - Optional 1656K77
DIFFERENTIAL PRESSURE GAUGES
Small
Slide Gauge
R-K103-151
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature: 40° to 175°F (4° to 79°C). Body: Aluminum, polycarbonate plastic bowl with steel shatterguard. Bowl: 35-ounce (1 liter) aluminum bowl with clear nylon sight glass. Bowl Drain: Internal automatic drain; optional manual drain or
external automat ic drain . For optional internal float drain, consult ROSS.
Bowl Ring: Aluminum.
Large Dual
Face Gauge
R-106-35
Filter Element: 40-micron rated; optional 5-micron rated element. Fluid Media: Compressed air. Inlet Pressure:
For automatic drain model: 15 to 200 psig (1.0 to 13.8 bar). For manual drain model: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile. Threads: NPT standard, BSPP. F or BSPP threads, add a “C” prefix
to the model number, e.g., C5022B7019.
Differential Pressure Gauge: Optional, consult ROSS.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
12 © 2012, ROSS CONTROLS.
Large Dual Face Gauge
with Reed Switch
R-106-35E (Normally Open)
R-106-35EC (Normally Closed)
All Rights Reserved.
HIGH-CAPACITY Filters
FLOW CHARTS
Ports: 1¼, 1½, & 2
Flow to 1000 scfm
FEATURES:
• Inline mounting
• Aluminum bowl
• Optional differential pressure gauge
• Internal oat drain; optional manual drain
A
C
ISO Symbols
B
Automatic Drain
A B † C Depth lb (kg)
DIMENSIONS inches (mm)
8.0 (203) 13.3 (337) 1.8 (45) 7.3 (186) 14.3 (6.59)
† With external drain, dimension B is increased by 8.0 inches (203 cm), and weight is increased by 2.56 pounds (1.16 kg).
Internal Float Drain Models Manual Drain Models
Port Air Flow Metal Metal
Size scfm (l/s) Bowl Bowl 1¼ 630 (297.3) 5-µm 5022B7018 5012B7018 1¼ 850 (401.1) 40-µm 5X00B7025 5X00B7054 1½ 690 (325.6) 5-µm 5022B8018 5012B8018 1½ 900 (424.7) 40-µm 5X00B8018 5X00B8019 2 750 (354.0) 5-µm 5022B9018 5012B9018 2 1000 (471.9) 40-µm 5X00B9004 5X00B9003
REPLACEMENT FILTER ELEMENT KITS
Element Rating/Type Kit Number
40-µm bronze - Standard 944K77 5-µm bronze - Optional 942K77
Filter
Manual Drain
Weight †
STANDARD 40-µm ELEMENT
psi
bar
5
0.35 4
0.28
3
0.21
2
0.14
1
0.07
PRESSURE DROP
00
psi
bar
psi
bar
5
0.35
5
0.35 4
0.28
4
0.28
3
0.21
3
0.21
2
0.14
2
0.14
1
0.07
1
0.07
PRESSURE DROP
PRESSURE DROP
0
0
bar
bar
0.35
0.35
0.28
0.28
0.21
0.21
0.14
0.14
0.07
0.07
0
0
FLOW
FLOW
0.42
0.35
0.28
0.21
0.14
0.07
FLOW
FLOW
0
0
psi
psi
5
5 4
4
3
3
2
2
1
1
PRESSURE DROP
PRESSURE DROP
0
0
scfm
scfm
0 100
0
l/s
l/s
0 50
0
psi
6 5 4
3
2
1
DIFFERENTIAL PRESSURE psid
0
0
0
scfm
scfm
l/s
l/s
Inlet Pressure psig (bar)
200 300 400 500 600 700 800 900 1000
100 150 200 250 300 350 400 450
OPTIONAL 5-µm ELEMENT
Inlet Pressure psig (bar)
1-1/4 Ports
0
0 100 050
0
1-1/2 Ports
200 300 400 500 600 700 800 900
100 150 200 250 300 350 400
150(10.3)92(6.3)36(2.5)
1-1/4 Ports
1-1/2 Ports
2 Ports
2 Ports
DIFFERENTIAL PRESSURE GAUGES
Small
Slide Gauge
R-K103-151
Large Dual
Face Gauge
R-106-35
STANDARD SPECIFICATIONS (for products on this page): Ambient/Media Temperature: 40° to 175°F (4° to 79°C). Body: Aluminum. Bowl: 123-ounce (3700-ml) capacity aluminum bowl. Bowl Drain: Internal float drain; optional manual drain. Differential Pressure Gauge: Optional, consult ROSS. Filter Element: 40-micron rated; optional 5-micron rated element.
Fluid Media: Compressed air. Inlet Pressure:
For internal float drain model: 30 to 200 psig (2.1 to 13.8 bar). For manual drain model: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile. Threads: NPT standard, BSPP. F or BSPP threads, add a “C” prefix
to the model number, e.g., C5022B7018.
Large Dual Face Gauge
with Reed Switch
R-106-35E (Normally Open)
R-106-35EC (Normally Closed)
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
www.rosscontrols.com 13
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use