Ross HDR-6110USB User Manual

HD Digital Receiver

User Manual

MODEL NUMBER

HDR-6110USB

Please read this Manual thoroughly before using your

Receiver and then retain for future reference.

HD Digital Satellite Receiver

Signal

Stand by

1. Important Safety Instructions p1

1.1 Safety Information p1

1.2 General Information p2

2. In the Box p2

3. Controls and Functions p3

3.1 Front Panel p3

3.2 Rear Panel p3

3.3 Remote Control p4

3.4 Remote Control Functions p5

4. Installation p7

4.1 Satellite Dish Installation (REFER TO SEPARATE INSTRUCTIONS) p7

4.2 Receiver Installation p7

4.2.1 Connecting your Receiver p7

4.2.2 Preparing your Remote Control p7

4.2.3 TV Format Set-Up p7

4.2.4 Check Satellite Signal Reception p8

4.2.5 Fast Channel Set-Up Astra 2/A/B/D/Eurobird 1 p8

4.2.6 Chosen Satellite Scan p8

5. Menu System p9

5.1 Installation Menu p9

5.1.1 Selecting your Satellite p9

5.1.2 Selecting your SCAN Mode p9

5.2 Channel Edit Menu p9

5.2.1 TV Channel Edit p10

5.2.2 Radio Channel Edit p11

5.2.3 Set TV Favourites p11

5.2.4 Set Radio Favourites p11

5.3 System Menu p11

5.3.1 System Setting p12

5.3.2 Local Time Setting p12

5.3.3 Timer p13

5.3.4 System Information p13

5.4 User Settings Menu (User’s Conference) p14

5.4.1 Parental Control p14

5.4.2 OSD Control p15

5.4.3 USB p15

5.4.4 Factory Default p16

5.5 Games Menu p16

6. Advanced Installation p17

6.1 Antenna Setting p17

6.2 Transponder p18

6.3 Motor Conﬁ guration (DiSEqC1.2) p19

6.4 USALS (DiSEqC) Set-Up p19

7. Software Update p20

8. Trouble Shooting p21

9. Speciﬁ cation p22

Contents

1

1.0 Important Safety Instructions

1.1 Safety Information

• Read these Instructions carefully and retain for future reference. If you sell, or give

this Receiver away be sure to pass on the Instructions.

• There are no user serviceable parts inside this unit. DO NOT remove the cover there

are dangerous voltages inside. Electric shock hazard.

• This unit operates from a 100~240V 50/60Hz Supply. Consumption is ~20W.

• During use, this device may become warm, this is normal. DO NOT allow anything

to block the ventilation slots as this may cause overheating and a consequent risk of ﬁ re.

• DO NOT place naked ﬂ ames (such as candles) on this equipment.

• DO NOT stand other equipment on this unit.

• DO NOT operate close to heaters or other heat sources.

• DO NOT stand on soft furnishings.

• MAKE SURE there is a minimum clearance of 5cm on all sides of the unit.

• DO NOT allow anything to trap, pinch or otherwise damage the Power Cord. If the

power cord should become damaged IMMEDIATELY switch the Receiver off at the wall and unplug it. You should then contact your Service Centre to carry out a repair.

• DO NOT overload the wall socket, this can be dangerous and lead to a ﬁ re hazard.

• MAKE SURE you have easy access to the mains plug in case of emergency

• DO NOT unplug the unit by pulling the Power Cord, always grasp the plug ﬁ rmly

and pull from the wall socket.

• DO NOT stand items such as water ﬁ lled vases on this Receiver.

• DO NOT operate this unit in damp conditions or allow water or other ﬂ uids to enter

the enclosure. If this happens, switch off IMMEDIATELY and refer the device to the Ross Helpline.

• DO NOT touch the mains plug or power cord with wet hands. Electric shock Hazard.

• DO NOT connect or disconnect cables from this receiver when it is turned on.

Switch off the power ﬁ rst or this unit or other equipment may be damaged. This is most important for the cable from the Dish (LNB).

• MAKE SURE the LNB cable outer is earthed.

• DO NOT clean this device using solvent based products. Use only a soft dry cloth.

2

1.2 General Information

• Thank you for choosing a Ross Digital Satellite TV Receiver. Treated with care and

used in accordance with the contents of this manual it will provide many years of reliable service.

• This symbol indicates that, at the end of its useful life, this product must

not be disposed of with normal domestic waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please recycle it responsibly. You can return your used device using the return and collection service or contact the retailer where the product was purchased.Batteries used in operating this product may contain toxic agents that are hazardous to the environment. Therefore, as with the unit itself, dispose of the batteries according to the prevailing statutory regulations. Never put the batteries in normal household waste.

• This receiver conforms to all applicable EU Legislation for this type of

product. Further information can be obtained from Ross if required.

2.0 In the Box

Please open your box carefully and check the contents which should be as per the list below. If anything is missing please contact the Ross Helpline.

• HD Satellite Receiver (Set Top Box)

• Remote Control (NOTE: 2 x AAA Batteries not included)

• User Manual

3.0 Controls & Functions:

3.1 Front Panel

- Standby Button

- Channel Down Button

- Channel Up Button

3.2 Rear Panel

- LNB IN: To connect the input cable from the satellite dish.

- LNB OUT: To connect to another satellite receiver if required.

- USB Socket: To connect an external USB memory device for programme recording.

- HDMI Socket: To connect to a HDTV with an HDMI cable for HD (High deﬁ nition) viewing.

- DIGITAL AUDIO Socket: Optical Audio output if required.

- TV SCART Socket: For the video/audio input of the TV for SD (Standard deﬁ nition)

viewing only.

- Power cable.

-Power switch/Power ON/OFF switch.

3

A

B

C

A

B

C

E

D

F

G

H

HD Digital Satellite Receiver

Signal

Stand by

A

B C

B

A

D E F G H

C

4

1

POWER

TIMER

NUMERIC BUTTONS

16:9

LANG

CH+/-

VOL+/-

OK

MENU

INFO

SAT

ZOOM

BACKWARD

FORWARD

MEDIA

GAME

2

4

5

6

7

8

9

10

11

12

13

14

15

16

18

17

19

3.3 Remote Control

MUTE

AUDIO

SUBTL

RECALL

PAGE UP/DOWN

TIMESHIFT

V-FORMAT

EXIT

TXT

TV/RADIO

PAUSE

STOP

PLAY/PAUSE

RECORD

SLOW

HDD

PVR

21

22

23

24

27

26

28

29

30

31

32

33

34

35

36

37

38

TIMER

20

FAVOURITE

25

EPG

3

3.4 Remote Control Functions

Button Function

POWER: Turns on the power or switches the unit to standby mode

TIMER: To select upto 8 timer sequences of your choice.

EPI: Shows Now and Next EPG for the programme being viewed.

NUMERIC BUTTONS: Enter a number to select a channel directly or to select the menu options.

16:9: Adjusts screen format between 16:9 and 4:3.

LANG: Press to select OSD language preference.

CH +/-: Up and down select for channels. Also used in menu operations.

VOL +/-: Volume up/down. Or change pages on the channel list. Also used in Menu operations.

OK: Displays the channel list and selects the item on the menu. When in the menu press OK to save setting and exit.

MENU: Open the main menu during TV viewing.

INFO/EPG: Displays satellite and transponder information for the current programme.

SAT: To display the satellite list or channel list in the viewing mode. In the Antenna Setting or the Transponder menu press SAT to initiate a scan. (Red button to add satellite)

ZOOM: (NOT AVAILABLE ON THIS MODEL). (Green button to add satellite).

Press to rewind. (select FR*2, FR*4, FR*8, FR*16 for different speeds)

Press to fast forward. (select FF*2, FF*4, FF*8, FF*16 for different speeds )

Press to choose the previous media ﬁ le.

Press to choose the next media ﬁ le.

MEDIA: Press the button to directly enter USB memory device.

GAME: Press the button to directly enter game menu

TIMER (Sleep): Press to set the power off time periods-available; 10mins, 30mins, 60mins, 90mins and press the OK button to set SLEEP timer on. Alternatively use numeric keys to set your preferred time in user default mode.

MUTE: Turns the sound off and then back on with a second press.

AUDIO: Change audio mode between; left, right and stereo. In the Antenna Setting

menu press AUDIO to edit the satellite. In the Transponder menu press AUDIO to edit TP.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

5

22

Button Function

SUBTL: Sets broadcast dependant subtitles for the current TV programme.

RECALL: Press to switch to previously watched channel.

FAV: Select favourite channel list or current channel list in the view mode.

TIMESHIFT: (NOT AVAILABLE ON THIS MODEL).

PAGE UP/DOWN: Press to jump one page up or down.

V-FORMAT: Press to select the video output mode between; 1080I, 720 P and 576P. When changing video format, there will be a ﬂ icker for a few seconds as the format adjusts.

EXIT: Press to exit and save from current menu.

TXT: (NOT AVAILABLE ON THIS MODEL).

TV/RADIO: Switches between TV and Radio channels. (Blue button to delete Satellites).

PAUSE: Freeze the screen. (Yellow button to edit Satellite).

STOP: Press to STOP playback when watching a recording playing back a media ﬁ le or to stop a recording.

PLAY/PAUSE: Press to start watching a recording or media ﬁ le or to pause.

RECORD: Press to start recording to an external USB Memory Device

SLOW: (NOT AVAILABLE ON THIS MODEL).

HDD: (NOT AVAILABLE ON THIS MODEL).

PVR: To directly enter the folder information of the attached USB memory device.

Please observe the following when using your Remote Control –

• Change the batteries when operation becomes poor or erratic.

• Always use two new batteries, DO NOT mix old and new.

• Dispose of old batteries in an environmentally responsible way.

• DO NOT place spent batteries in a ﬁ re or attempt to recharge them.

• If you are not going to use the Remote Control for an extended period then remove the

batteries to avoid the risk of leakage.

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

6

Ross HDR-6110USB User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual