ROSS DISTORTION User guide

Page 1
FULL WARRANTY
RossElectronics.com. warranty details and service please visit natural disaster, or unauthorized repair. For full caused by misuse, modification, abuse, accident, This warranty does not cover loss/theft, damage limited to the original purchaser and is not transferable. workmanship under normal use. This warranty is product to be free from defects in material and warranty from the date of purchase. We warrant this ROSS guitar pedals are backed by a one (1) year
LICENSED, MANUFACTURED, AND SOLD BY JHS PEDALS
Electronic sound effects, precision engineered, hand assembled and individually tested to assure maximum performance, and reliability.
Page 2
DISTORTION
The ROSS Distortion is an op-amp, hard clipping distortion built around the classic 1970s topology seen in pedals like the MXR Distortion Plus, the DOD 250, and the Proco RAT. While this pedal can be used in almost any situation, it excels at creating natural tube-like distortion and pushing your amplier into natural breakup.
CONTROLS
“Level” controls volume (right is louder, left is quieter). “Distort” controls the amount of hard-clipping distortion (right is more distorted, left is less distorted). The side switch allows the player to toggle between two versions of the circuit produced during its fteen-year history: Germanium mode (“Era 2” version) and Silicon mode (“Era 3” version). The footswitch activates the pedal via soft touch bypass switching. The status LED indicates the circuit is active.
JACKS
The ¼” input and output jacks connect to your guitar and amplier. The power jack accepts standard 9V DC Negative Center power and consumes 40mA.
Loading...