Rosewill SHIELDEYE RSCM-0700B041 User Manual

SHIELD
4 Packed Wired Cameras
USER MANUAL
1. INTRODUCTION
The infrared CCTV camera is with a night vision function. With the use of a CMOS sensor, this camera can capture high quality images with less lag or electronic interference. This series is best suited for surveillance systems because of: (1) High resolution (2) High sensitivity (3) Automatic electronic shutter
2. CONTENT LIST FOR RSCM-0700B041
(1) 4* Indoor/Outdoor Security Camera
(2) 4* 60ft. Video/Power Extension Cable
(3) 4* Monting Hardware Set
(4) 1* User Manual
(5) 1*AC Power Adapter
(6) 1* Window Warning Sticker
(7) 1* 4-Way Spitter Cable
3. CAUTIONS
(1) Do not place the camera in direct sunlight, rain, or dust. (2) Do not touch the lens of camera with your fingers. If cleaning is necessary,
please use a soft cloth moistened with a little alcohol to wipe off any dust. (3) Before installing please ensure the power source works. (4) Do not drop or strike the camera against a hard surface.
4. INSTALLATION
(1) Attach the camera to the mounting bracket using the included screws. (2) Attach the mounting bracket to a wall or designated area using the included
screws and wall anchors. If the camera is being mounted outdoors, please
ensure the video and power connectors are protected from the weather; either
behind a wall, in a junction box, or covered with weatherproof material. *WARNING* Do not mount the camera next to high voltage wiring or where the lens will be subjected to direct or reflected bright light. (3) Connect the camera to the included power supply as the diagram below.
Monitor
Power Supply Adapter
Camera
SHIELD
FCC Statement:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference, including
interference that may cause undesired results.
Warranty Statement:
This product is covered by standard warranty terms and conditions for a period of 12 months from the date of purchase.
SPECIFICATIONS
Image Sensor
1/4 "CMOS
Effective Pixels
PAL: 720(H)X576(V); NTSC: 720(H)X480(V)
Horizontal Resolution
700TVL
Signal System
PAL/NTSC
Lens
3.6mm (6mm optional)
View Angle
60 degrees(40-45degrees)
IR Cut Filter
Yes
IR LED
24 pcs
Frame Rate
PAL: 50 fields/sec; NTSC: 60 fields/sec
Minimum Illuminance
0 Lux IR ON
Gain Control
Auto
S/N Ratio
>48dB (AGC OFF)
Gamma Characteristics
0.45
Shutter Speed
1/50(1/60)1/100000
Infrared Wave Length
850nm
Video Output
1.0Vp-p 75 Ohm
Material
Plastic
Night-Vision Range
65ft (20m)
Power Supply
DC 12V ±10%(IR ON)
Operation temp.
14°F+122°F ( -10℃~+50)
Loading...