Rosewill RXS-3323 User Manual 2

Wired Internet Camera RXS-3323

Wireless Internet Camera RXS-4324

Quick Installation Guide

Internet Camera RXS-3323/RXS-4324 Quick Installation Guide

Product Overview

Package Contents

Item Descriptions

1. RXS-3323 or RXS-432 Camera

2. Manual and Software Package CD

3. Quick Installation Guide

4. Detachable Wireless LAN Antenna (optional, only

comes with Wireless Camera)

5. RJ 45 Cable

6. 12V/1A Power Adapter

7. Camera Mount Kit

Please contact your reseller, if any of the above items are missing.

2

Internet Camera RXS-3323/RXS-4324 Quick Installation Guide

System Requirements

z Windows 2000, XP, Vista, or Windows 7.
z At least 256 MB of memory (512MB recommended)
z A wireless (802.11n or 802.11g) or Ethernet network.
z Internet Explorer 6.x or higher, Firefox 2.0 or later/ Safari Internet Web Browser
z VGA card resolution: 800 x 600 or above
z CPU: 1.3GHz or above processor

Introduction of Hardware

- Front View

IR LEDs:

Lens and Focus Ring:
Power and Wireless
LED (Orange Color):
Microphone:
LAN LED:

These LEDs are used for night vision during night or dark environment to
provide extra light source for the camera.
User can use this ring to make minor focus adjustment.
Indicates the power and wireless connection.

Built-in microphone for sound and voice reception.
This LED is used to indicate whether DC power is on or not. In addition,
this LED will be flashing under Ethernet/LAN connection.

3

Internet Camera RXS-3323/RXS-4324 Quick Installation Guide

- Rear View

Audio Output Jack:

Power Jack:

Antenna Connector:

LAN port:

The Audio Output Jack allows the camera to output audio or alerting sound.
Connect with a 3.5Ø phone jack speaker or headphone (speaker or
headphone don’t come with camera)
The input power is 12VDC which is provided by the power adapter included
in package

Note: Improper power adapter may damage the camera and result in
danger.

User can attach the included antenna to this connector to connect to a
wireless 802.11b/g/n network. (optional, for Wireless Camera only)
The RJ45 LAN socket is for connections to 10/100Base-TX Fast Ethernet
cabling. Please use Category 5 or 6 “straight through” cable (doesn’t come
with camera) to connect to Ethernet network switch, hub, or router.

Note: Please use “cross-over” cable if you need to connect the camera to
computer directly

Factory Default Reset:

Reset the Camera back to Factory Default

4

Internet Camera RXS-3323/RXS-4324 Quick Installation Guide

Installation

Hardware Installation:

- Camera LAN and Power Installation:

1. Please use cable connection for the

first time setup. Using the
RXS-4324 as example, please
connect an Ethernet cable to the
LAN socket located on the
camera’s rear and attach it to the

3. Once you have installed the camera well and powered it on, the power LED will

turn on. It means the system is booting up successfully. Furthermore, if you have a
proper network connection, and access to the camera, the LED will flash blue
under wired mode.

network.

2. Connect the attached power adapter

to the DC power jack of the
camera. Note: Use the power
adapter, 12VDC, included in the
package and connect it to wall
outlet for AC power.

- Ceiling Mount:

1. Fix the camera to L-type bracket with

the two supplied screws

5

2. Fix the bracket and camera to the

ceiling using two wall anchors and
screws