Rosewill RX81US-HT35B-BLK User Manual

External Enclosure for

3.5" SATA to USB + eSATA

RX81US-HT35B-BLK

User Manual

External Enclosure For 3.5” SATA to USB + eSATA User Manual

Please read this installation carefully before you use the
products.

Precaution:

z If it is a new HDD, needs to processing the disk partition
z Win98SE and WinME do not recognize NTFS formatted drives,

so if you want to use your drive on those platforms, we
recommend you to use FAT32 instead.

z Mac OS does not recognize NTFS formatted drives, to use your

device on both platforms, we recommend you using FAT32.

z If you use Win2000 / WinXP / Win Vista and FAT32, the biggest

single partition you can create will be 32GB. To create larger
partitions, you need to use the DOS command under Win98SE
or WinME or change to NTFS format.

z Make sure the jumper settings of your hard drive is “master”.
z Green light (access light) only light on when HDD accessing.

System Requirement:

z Minimum Intel Processor II 350MHz, 64MB RAM
z Compatible with IBM PC, USB interface included，Windows

98SE/ME/2000/XP/Vista operate system.

z Minimum Apple G3 processor, 64MB RAM
z MAC computer system MAC OS V8.6 or higher.
z Linux OS : please download kernel USB stack.

1

External Enclosure For 3.5” SATA to USB + eSATA User Manual

Available Interfaces

USB 2.0 + e-SERIAL ATA

Protection of DC adapter

a. Primary (Input) Protection

The input power line will be fused with a fuse 2.0A, 250 VAC.

b. Secondary (Output) protection

b.1. Over Current (OC) Protection

When an internal fault occurs, or an external fault is applied to the
power, such that an overload or short circuit is applied to the
output, the power will be shutdown. Power latch is not allowed.

b.2 Over Voltage (OV) Protection

If an over-voltage fault occurs on the adapter output, the power
will shutdown.

b.3 Short Circuit Protection

The power will protect itself, and shut down, if a short circuit is
placed between DC return and the output. This condition will
cause no damage to the power. Power latch is not allowed.

2

External Enclosure For 3.5” SATA to USB + eSATA User Manual

Package Contents

z 3.5 inch external enclosure
z Driver Disk
z Installation Guide
z AC adapter
z USB cable
z eSATA cable
z Footstand
z Screw Kit

FEATURE

z Standard USB 2.0 high speed transfer rate.
z Support Serial ATA. (USB + e-SATA)
z Aluminum HDD frame for easy installation.
z Crystal acrylic casing with blue & green LED illumination.
z Suitable for all 3.5" SATA HDD.
z All aluminum, to enhance heat dissipation.
z Crystal footstand for vertical style.
z Plug and play / hot swappable.
z OS support Windows 98SE/ME/2000/XP/Vista/Mac OS 8.6

above.

3