Rosewill RX81US-HT-25A-BLK User Manual

External Enclosure for

2.5" SATA to USB + eSATA

RX81US-HT-25A-BLK

User Manual

External Enclosure for 2.5” SATA to USB + eSATA User Manual

Please read this installation carefully before you use the
products.

Precaution:

1. If it is a new HDD, needs to processing the disk partition

2. Win98SE and WinME do not recognize NTFS formatted drives,

so if you want to use your drive on those platforms, we
recommend you to use FAT32 instead.

3. Mac OS does not recognize NTFS formatted drives, to use

your device on both platforms, we recommend you using
FAT32.

4. If you use Win2000 / WinXP / Win Vista and FAT32, the

biggest single partition you can create will be 32GB. To create
larger partitions, you need to change to NTFS format.

5. Make sure the jumper settings of your hard drive is “master”.

System Requirement

•

Minimum Intel Processor II 350MHz, 64MB RAM

• Compatible with IBM PC, USB interface included，Windows

98/ME/2000/XP/Vista operate system.

• Minimum Apple G3 processor, 64MB RAM

• MAC computer system MAC OS V8.6 or higher.

• Linux OS: please download kernel USB stack.

Package Contents

•

2.5 inch external enclosure

• Driver Disk

• Installation Guide

• eSATA cable

• USB cable

• USB to DC cable

• Screw Kit

• Carry bag

1

External Enclosure for 2.5” SATA to USB + eSATA User Manual

Feature

•

Standard USB 2.0 high speed transfer rate.

• Support Serial ATA. (USB + eSATA).

• eSATA transfer rate up to 3.0Gbps(NCQ support)

• Suitable for 2.5" HDD.

• All aluminum, to enhance heat dissipation.

• Plug and play / hot swappable.

OS support Win 98SE/ME/2000/XP/Vista/Mac OS 8.6 above.

•

echnical Specifi

T cations

Bus Interfaces

Data Speeds

Connectors USB mini B receptacle / eSATA connectors
SATA Standard II with NCQ support Compliant with SATA I /
LED Power On / Access
Dimensions 132*82*18 mm ( L*W*H)

USB v 2.0 / eSATA

:

USB 2.0 = 480 Mbps
eSATA = 3 Gbps (NCQ Support)

2