User Manual
2.5” SATA TO USB External Enclosure RX81U-AT-25A
Include
z 2.5” External Enclosure
z USB Y-Cable
z Carry Pouch
z User Manual
z Screw Pack
z Screw Driver
Hardware Installation Guide
STEP1: Pull out the rear panel. You will see the internal structure of the external enclosure.
1
User Manual
2.5” SATA TO USB External Enclosure RX81U-AT-25A
STEP2:
SATA HDD:Connect the HDD to the SATA connector. Make sure the connector is connected
well.
STEP3: Insert the HDD and PCB board to the aluminum case.
SATA HDD
STEP4: Screw the back cover firmly to the body case.
Please do unscrew on both side.
2