Page 1
SERVER CHASSIS
WITH 12x HOT-SWAPPABLE SATA/SAS BAY
RSV-L4412
User Manual
Page 2
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA/SAS BAY RSV-L4412 User Manual
1
Contents
Product Overview ............................................................................................................................... 2
Introduction ................................ ................................ ................................ ................................. 3
Feature ......................................................................................................................................... 3
Specification ................................................................................................................................ 3
Installation Guide ............................................................................................................................... 4
Top Cover Disassembly .............................................................................................................. 4
Hard Drive Tray Assembly / Disassembly ................................................................................. 5
Hard Drive Installation ................................................................................................................ 5
Installing a 3.5” HDD .............................................................................................................. 5
Installing a 2.5” HDD .............................................................................................................. 6
Hot Swap Module Cable Installation .......................................................................................... 7
Page 3
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA/SAS BAY RSV-L4412 User Manual
2
Product Overview
Page 4
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA/SAS BAY RSV-L4412 User Manual
3
Introduction
RSV-L4412 is a 4U rackmount industrial Hot-swap chassis for various server computers which supports any
E-ATX (12” x 13”) and smaller form factor motherboards. It holds PS2 power supply which provides customers
with wider selection and more affordable choices depending on the system design purposes. In addition,
RSV-L4412 holds 12 hot swap SATA/SAS bays with a large-scale fan filter and easy-to-use knob key for great
serviceability of the system.
To use the Hot-Swap feature, Please set motherboard BIOS to AHCI and format the HDD using AHCI.
Feature
Carries a total of 12x 3.5” (2.5”) Hot Swappable SATA (I, II & III) or SAS bays.
Best cooling design carry up to front 3x 120 mm front cooling fans and 2x 80 mm back cooling fans max (all
are included in RSV- L4412).
Front door with key lock for better security.
Special design for add-on cards in the system (7 pieces max).
2x USB 2.0 connector in front panel.
Specification
Chassis Type
Rackmount
Color
Black
Case Material
Metal/ Steel, 1.0 mm thickness
Motherboard Compatibility
12" x 13" E-ATX and below
Form Factor
4U
Cooling System
80mm Fans
2 max (All 2x 80mm Fans included)
120mm Fans
3 max (All 3x 120 mm Fans included)
Expansion
Hot-Swap 3.5"/2.5” Drive Bays
12x (SATA I, II, III & SAS supported)
Expansion Slots
7
Physical Spec
Control & Indicator
1x Power switch +1x Reset switch
1x LED (power) +1 x LED (HDD), 2 x LED (LAN); 2x 2.0 USB
Dimensions(L x W x H)
25" x 16.8" x 7.0" inches (635 x 427 x 178 mm)
Weight
Net Weight : 31.9 lbs. (14.5kg)
Gross Weight : 39.8 lbs (18.0kg)
Package Contents
RSV-L4412 Server Case; Keys; Screws; SATA Cables, Other
Accessories
PIC
ITEM
PURPOSE
PIC
ITEM
PURPOSE
SCREWS x 6
POWER SUPPLY
Buzzer x 1
(PC Speaker)
MOTHERBOAR
D
SCREWS x 20
MOTHERBOARD
MOTHERBOARD
STANDOFF x 3
9 standoffs has already screwed on the chassis
23.6” (60cm) SATA III
cable x 12
Page 5
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA/SAS BAY RSV-L4412 User Manual
4
Installation Guide
Top Cover Disassembly
1. Remove the screws from each side of
the Chassis. (two on each side)
2. Once the screws removed, push the
top cover to remove from the chassis.
Page 6
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA/SAS BAY RSV-L4412 User Manual
5
Hard Drive Tray Assembly / Disassembly
1. Each HDD Tray has a press button for
releasing the hinge. To remove the HDD
Tray; first press the button (red circle).
2. Upon press the button, the HDD tray will
be easily pull out.
3. To slide in the HDD tray, please make sure
to push the tray all the way into the
module until a click sound indicating that
the arm was fixed into the module.
Hard Drive Installation
Installing a 3.5” HDD
1. To install a 3.5” HDD, please make sure
that the 3.5” HDD is align with the screw
holes on the side of the tray.
Page 7
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA/SAS BAY RSV-L4412 User Manual
6
2. Once align, you can fasten the screws on
both side of the tray to fix the HDD.
(Please make sure that the connector of
the HDD is facing outward)
Installing a 2.5” HDD
1. To install a 2.5” HDD, please make sure
that the 2.5” HDD is align with the screw
holes on the tray
2. Once align, you can fasten the screws on
the tray to fix the HDD. (Please make sure
that the connector of the HDD is facing
outward)
Page 8
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA/SAS BAY RSV-L4412 User Manual
7
Hot Swap Module Cable Installation
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information and future support for your product.
Loading...