Rosewill RS-12001, RSCM-12002CM, RSCM-12001, RSCM-12002 Advanced Installation Manual
1
Internet Camera
Advanced Installation Guide
2
Contents
CHAPTER 1
Product Overview
1.1 PACKAGE CONTENTS ............................................................................................................ 4
1.2 INTRODUCTION ..................................................................................................................... 5
1.3 FEATURES ........................................................................................................................... 7
CHAPTER 2
Hardware Installation
2.1 INSTALLING THE CAMERA STAND ......................................................................................... 10
2.2 CONNECTING THE CAMERA TO LAN/WLAN ......................................................................... 11
2.3 APPLICATIONS OF THE CAMERA ........................................................................................... 12
Chapter 3
Software Ins tallation
3.1 IPFINDER........................................................................................................................... 13
3.2 ACCESSING TO THE CAMERA ............................................................................................... 14
3.3 CONFIGURING THE IP ADDRESS OF THE PC ......................................................................... 17
Chapter 4
Configuring the Camera
4.1 WEB CONFIGURATION ........................................................................................................ 18
4.2 SMART WIZARD .................................................................................................................. 19
4.3 BASIC SETUP ..................................................................................................................... 22
4.4 NETWORK SETTINGS .......................................................................................................... 25
4.5 SETTING UP VIDEO & AUDIO................................................................................................ 33
4.6 EVENT SERVER CONFIGURATION......................................................................................... 35
4.7 MOTION DETECT ................................................................................................................ 36
4.8 EVENT CONFIGURATION ...................................................................................................... 38
4.9 TOOLS 41
4.10 INFORMATION ....................................................................................................................... 43
CHAPTER 5
Software Application - UltraVi ew Pro
5.1 INTRODUCTION ....................................................................................................................... 44
5.2 INSTALLATION ......................................................................................................................... 45
5.3 USING ULTRAVIEW PRO .......................................................................................................... 47
5.3.1 Starting the Program ........................................................................................... 47
5.3.2 Main Window and Item Feature .......................................................................... 48
5.3.3 Accessing the Camera ........................................................................................ 52
5.3.4 Recording / Playing Video ................................................................................... 58
5.4 CONFIGURING ULTRAVIEW PRO ................................................................................................. 63
5.4.1 Configuring the eMap View Setting .................................................................... 63
5.4.2 Configuring the System ....................................................................................... 68
3
5.4.3 Event Configuration ............................................................................................. 69
5.4.4 Changing System Language ............................................................................... 73
5.4.5 Terminating Operation ........................................................................................ 74
CHAPTER 6
Rem ote Live View
6.1 OVERVIEW .............................................................................................................................. 76
6.2 INSTRUCTIONS ........................................................................................................................ 76
WEB:C4MI
6.2.1 User Registration .......................................................................................................... 76
6.2.2 Activating Devices ........................................................................................................ 80
6.2.3. My Device .................................................................................................................... 83
6.2.4. Setting Up Accounts .................................................................................................... 89
6.2.5. Deleting Devices .......................................................................................................... 90
APP:EAGLESENSE
6.3 OPERATING EAGLESENSE ........................................................................................................ 92
Andriod Google Play .............................................................................................................. 92
iTune App Store ..................................................................................................................... 93
6.3.2 Viewing Videos ............................................................................................................. 95
6.3.3 Viewing Images Generated from Multiple Videos ...................................................... 100
6.3.4 Exiting EagleSense..................................................................................................... 105
6.4 FREQUENTLY ASKED QUESTIONS ........................................................................................... 106
6.4.1 The webpage cannot be displayed, what should I do? .............................................. 106
6.4.2 I forgot my password, how can I reset one? .............................................................. 106
6.4.3 How do I download user client? ................................................................................. 108
CHAPTER 7
APPENDIX.
GLOSSARY OF TERMS ................................................................................................................... 109
4
CHAPTER 1
Product Overview
1.1 Package Contents
Check the items contained in the package carefully. You should have the following:
● Wireless Internet Camera
● AC Power Adapter.
● Camera Stand.
● Ethernet Cable (RJ-45 type).
● Installation CD-ROM.
● Quick Installation Guide.
NOTE Once any item contained is damaged or missing, contact the authorized dealer of
your locale.
5
1.2 Introduction
Front View
Lens Assembly
Power LED
Indicates the camera
is powered on with the
steady amber light.
Link LED
indicates the camera’s
network connectivity
with the flashing green
light.
Internal Microphone
allows the camera to
receive sound and voice.
6
Rear View
● For more information of the WPS button, refer to the instruction of the Web
Configuration, Network >> Wireless >> WPS Setting.
Screw Hole
is used to connect
the camera stand.
Reset Button will restart
the camera when it is
pressed quickly; when it is
long pressed for five
seconds, the camera will
resume the factory default
settings.
DC Power Connector
is used to connect the
AC power adapter, in
order to supply power
to the camera.
Ethernet Cable
Connector
is used to connect
the network cable,
which supports the
NWay protocol so
that the camera can
detect the network
speed
automatically.
WPS Button* (for
wireless model)
is used to protect your
wireless network and
for easy wireless
connection setup.
7
1.3 Features
￭ MJPEG codec Supported
The camera provides you with VGA images by the MJPEG codec technology, allowing
you to adjust image size and quality, and bit rate according to the networking
environment.
￭ 1-way Audio Capability
The built-in microphone of the camera provides on-the-spot audio via the Internet,
allowing you to monitor the on-site voice.
￭ Remote Control Supported
By using a standard Web browser or the bundled UltraView Pro software application,
the administrator can easily change the configuration of the camera via Intranet or
Internet. In addition, the camera can be upgraded remotely when a new firmware is
available. The users are also allowed to monitor the image and take snapshots via the
network.
￭ Multiple Platforms Supported
The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP,
and other Internet related protocols. Therefore, you can use the camera in a mixed
operating system environment, such as Windows Vista and Windows 7.
￭ Multiple Applications Supported
Through the remote access technology, you can use the cameras to monitor various
objects and places for your own purposes.
For example, babies at home, patients in the hospital, offices and banks, and more. The
camera can capture both still images and video clips, so that you can keep the archives
and restore them at any time.
8
Specification
Model
RSCM-12001
RSCM-12002
Image Sensor
Image Sensor
1/5” Color CMOS Sensor
Resolution
640 X 480
Minimum Illumination
0.7 Lux
Lens
Digital Zoom
3x
Lens Type
Board Lens
Aperture (F/No.)
2.8
Focus Length
2.7mm
View Angel(Horizontal)
52.8 Degree
View Angel(Vertical)
39.6 Degree
View Angle(Diagonal)
66 Degree
Night Vision
IR-Cut Filter
N/A
Auto
Illumination Distance
N/A
Up To 5 Meters
Audio (One-Way)
Microphone
Built-In Omni-Directional Microphone
Sensitivity
-48db +/- 3db
Frequency
50~16000hz
Audio Codec
PCM (Audio In)
Video
Compression
MJPEG
Auto Exposure
Yes
Auto White Balance
Yes
Auto Gain Control
Yes
Resolution And Frame Rate
VGA (640 X 480 ) @ 30 FPS
QVGA ( 320 X 240 ) @ 30 FPS
QQVGA ( 160 X 120) @ 30 FPS
Networking
Network Protocols
IPV4, ARP, TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP,
FTP, HTTP, PPPoE, UPnP and SSL, Bonjour
Ethernet
IEEE 802.3u 10/100Mbps Auto-MDIX Fast Ethernet
Wireless
IEEE 802.11 b/g/n Wireless LAN
Security
64/128-bit WEP, WPA / WPA2-PSK
Hardware
System ROM
4MByte NOR Flash
System RAM
32MByte SDRAM
Power LED
Orange Color
Link/Act. LED
Green Color
Reset Button
Push And Hold Over 5 Sec Will Be Factory Reset
WPS Button
Yes
RJ45 Port
X 1
Antenna
Built-In 2.5dbi Internal Antenna
Power
DC 5V / 1.2A
Power Consumption
3.5 Watts Max.
4.5 Watts Max.
Operation Temperature/Humidity
0°C ~ 45°C (32°F ~ 104°F)/20% ~ 85% (Non-Condensing)
Storage Temperature/Humidity
-15°C ~ 60°C (5°F ~ 140°F)/0% ~ 90%(Non-Condensing)
Approvals
FCC/CE class B
Dimensions (Body Only)
2.9” (W) X 3.7” (H) X 1.2” (D) / 74mm (W) X 95mm (H) X 30.5mm (D)
Weight (Body Only)
0.19lbs / 85g
9
1.4 System Requirement
Networking
- LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet, Auto-MDIX
- WLAN: IEEE 802.11b/g/n
Accessing the Camera using Web Browser
- Platform: Microsoft® Windows® 2000/XP/Vista/Win7
- CPU: Intel Pentium III 800MHz or above
- RAM: 512MB
- Resolution: 800x600 or above
- User Interface: Microsoft® Internet Explorer 6.0 or above; Apple Safari 2 or above;
Mozilla Firefox 2.00 or above; Google Chrome
Accessing the Camera using UltraView Pro
- Platform: Microsoft® Windows® XP/Vista/Win7
- Resolution: 1024x768 or above
Hardware Requirement:
- 1~8 cameras: Intel Core 2 Duo 2GB RAM
- 9~32 cameras: Intel Core 2 Quad 4GB RAM
NOTE If you connect multiple cameras to monitor various places simultaneously, you are
recommended to use a computer with higher performance.
10
CHAPTER 2
Hardware Installation
2.1 Installing the Camera Stand
The camera comes with a camera stand, which uses a swivel ball screw head to lock to
the camera’s screw hole. When the camera stand is attached, you can place the
camera anywhere by mounting the camera through the three screw holes located in the
base of the camera stand.
The Camera Stand
11
2.2 Connecting the Camera to LAN/WLAN
Use the p your local area network (LAN).
When you connect provided Ethernet cable
to connect the camera to the AC power
adapter, the camera is powered on
automatically. You can verify the power
status from the Power LED on the front
panel of the camera.
Once connected, the Link LED starts
flashing green light and the camera is on
standby and ready for use now.
Connecting the Ethernet Cable
When the camera is powered on, the camera will automatically search any
access point with “default” SSID.
NOTE
(For wireless model) If the camera cannot to your wireless network, you need to install
the camera in LAN and proceed with WLAN settings.
12
2.3 Applications of the Camera
The camera can be applied in multiple applications, including:
Monitor local and remote places and objects via Internet or Intranet.
Capture still images and video clips remotely.
Upload images or send email messages with the still images attached.
The following diagram explains one of the typical applications for your camera and
provides a basic example for installing the camera.
Home Applications
*Please enclosed by waterproof
housing when using in outdoor
*
13
Chapter 3
Software Installation
3.1 IPFinder
The camera comes with a conveniently utility, IPFinder, which is included in the
Installation CD-ROM, allowing you to search the camera on your network easily.
1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the
Auto-Run program.
2. Click the IPFinder item to launch the utility. The control panel will appear as below.
3. Once you get the IP address of the camera, launch the Web browser or UltraView
Pro to access your camera.
Display the connected
camera(s)
Double click to link the
camera
Click About
to get the Version information of IPFinder.
Click
Link to connect the selected camera.
Click
Change IP
to modify the IP address of the selected camera.
Click
Search to find the IP address of the connected camera(s).
Click Exit to close the utility.
14
3.2 Accessing to the Camera
Whenever you want to access the camera:
1. Since the default configuration of the camera is DHCP mode enabled, you are
recommended to launch IPFinder to search the IP address that is assigned to the
camera by the DHCP server, and then click Link to access the camera via the Web
browser.
2. If Network Camera can't get IP Address under DHCP mode, the default IP Address
will be 192.168.0.30.
3. When the login window appears, enter the default User name (admin) and
password (admin) and press OK to access to the main screen of the camera’s
Web Configuration.
NOTE If you are initially access to the camera, you will be ask to install a new plug-in for
the camera. Permission request depends on the Internet security settings of your
computer. Click Yes to proceed.
Enter the User name
and Password.
15
After you login into the Web Configuration of the camera, the main page will appear as
below:
he main page of the Web Configuration provides you with many useful information and
functions, including:
Camera Information – Display the camera’s location and the current date & time.
The information can be modified in the Web Configuration.
Language – Select your favorite displayed language for the system.
Live View Image – Displays the real-time image of the connected camera.
Live View/Setup Switch – Click Setup to configure the camera. For details, see
Chapter 4 and Click the Live View button to return to the Main screen to view the
live view image.
Function Buttons – Use these buttons to control the video functions.
Manual Record allows you to record and save a video clip.
Snapshot allows you to capture and save a still image.
Browse allows assign the destination folder to store the video clips and still
images.
Listen allows you to receive the on-site sound and voice from the camera.
Function Buttons
Live View/Setup Switch
Camera Information
Live View Image
Zoom In Buttons
Language
16
Zoom In Buttons – Click the buttons to zoom in the live view image by 1x, 2x, and
3x.
NOTE If your PC use Microsoft Vista platform, you may be unable to find these recorded
files what stored by Snapshot or Manual Record. You need to disable the
protected mode of Security in the IE Browser. Please follow as below Steps:
1. Open IE Browser
2. Select Tools Internet Options
3. Select Security
4. Disable the “Enable Protected Mode” then press OK
17
3.3 Configuring the IP Address of the PC
If you are failed to access to the camera, please check the IP address of your computer.
When you connect the camera to your computer directly to proceed with configuration of
the camera, you need to set up the IP addresses to be in the same segment for the two
devices to communicate.
1. On your computer, click Start > Control Panel to open the Control Panel window.
2. Double-click Network Connection to open the Network Connection window.
3. Right-click Local Area Connection and then click Properties from the shortcut
menu.
4. When the Local Area Connection Properties window appears, select the General
tab.
5. Select Internet Protocol [TCP/IP] and then click Properties to bring up the
Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment of the camera, select the
Use the following IP address option. Then, enter an IP address into the empty
field. The suggested IP address is 192.168.0.x (x is 1~254 except 30), and the
suggested Subnet mask is 255.255.255.0.
7. When you are finished, click OK.
18
Chapter 4
Configuring the Camera
4.1 Web Configuration
You can access and manage the camera through the Web browser and the provided
software application UltraView Pro. This chapter describes the Web Configuration, and
guides you through the configuration of the camera by using the web browser.
To configure the camera, click Setup on the main page of Web Configuration. The Web
Configuration will start from the Basic page.
The Web Configuration contains the settings that are required for the camera in the left
menu bar, including Smart Wizard, Basic, Network, Video, Event Server, Motion
detect, Event Configuration, Tools, and Information.
19
4.2 Smart Wizard
The camera’s Smart Wizard lets you configure your camera easily and quickly. The
wizard will guide you through the necessary settings with detailed instructions on each
step.
To start the wizard, click Smart Wizard in the left menu bar.
Step 1. Camera Settings
Step 2. IP Settings
Enter the name for
the camera and
place.
Enter the
administrator
password.
Select the IP
setting according
to your network:
DHCP
, Static IP,
or PPPoE.
20
Step 3. Email Settings
Step 4. Wireless Networking (for wireless model)
Enter the required
information to be
able to send email
with image.
Complete the required
settings for wireless
networking.
21
Step 5. Confirm Settings
This step shows the configuration of your camera. When you confirm the settings, click
Apply to finish the wizard and reboot the camera. Otherwise, click Prev to go back to
the previous step(s) and change the settings; or click Cancel to end the wizard and
discard the changes.
22
4.3 Basic Setup
The Basic menu contains three sub-menus that provide the system settings for the
camera, such as the Camera Name, Location, Date & Time, and User management.
Basic >> System
Basic
- Camera Name: Enter a descriptive name for the camera.
- Location: Enter a descriptive name for the location used by the camera.
Indication LED
This item allows you to set the LED illumination as desired. There are two options:
Normal and OFF.
Basic >> Date & Time
Date & Time
- Time Zone: Select the proper time zone for the region from the pull-down menu.
- Synchronize with PC: Select this option and the date & time settings of the
camera will be synchronized with the connected computer.
- Synchronize with NTP Server: Select this option and the time will be
synchronized with the NTP Server. You need to enter the IP address of the
server and select the update interval in the following two boxes.
- Manual: Select this option to set the date and time manually.
23
Basic >> User
Administrator
To prevent unauthorized access to the camera’s Web Configuration, you are
strongly recommend to change the default administrator password. Type the
administrator password twice to set and confirm the password.
General User
- User Name: Enter the user’s name you want to add to use the camera.
- Password: Enter the password for the new user.
When you are finished, click Add/Modify to add the new user to the camera. To
modify the user’s information, select the one you want to modify from UserList and
click Add/Modify.
- UserList: Display the existing users of the camera. To delete a user, select the
one you want to delete and click Delete.
Guest
- User Name: Enter the guest’s name you want to add to use the camera.
- Password: Enter the password for the new guest.
24
- UserList: Display the existing guests of the camera. To delete a user, select the
one you want to delete and click Delete.
NOTE The “General User” can access the camera and control the Function buttons of
the camera’s Web Configuration; the “Guest’ can only view the live view image
from the main page of the Web Configuration while accessing the camera. Only
the “Administrator” is allowed to configure the camera through the Web
Configuration.
25
4.4 Network Settings
The Network menu contains three sub-menus that provide the network settings for the
camera, such as the IP Setting, DDNS Setting, IP Filter, and Wireless (for wireless
model).
Network >> Network
IP Setting
This item allows you to select the IP address mode and set up the related
configuration.
- DHCP: Select this option when your network uses the DHCP server. When the
camera starts up, it will be assigned an IP address from the DHCP server
automatically.
- Static IP: Select this option to assign the IP address for the camera directly.
You can use IPFinder to obtain the related setting values.
26
-
IP
Enter the IP address of the camera. The default
setting is 192.168.0.30.
Subnet Mask
Enter the Subnet Mask of the camera. The default
setting is 255.255.255.0.
Default Gateway
Enter the Default Gateway of the camera. The
default setting is 192.168.0.1.
Primary/
Secondary DNS
DNS (Domain Name System) translates domain
names into IP addresses. Enter the Primary DNS
and Secondary DNS that are provided by ISP.
- PPPoE: Select this option when you use a direct connection via the ADSL
modem. You should have a PPPoE account from your Internet service provider.
Enter the User Name and Password. The camera will get an IP address from
the ISP as starting up.
NOTE Once the camera get an IP address from the ISP as starting up, it automatically
sends a notification email to you. Therefore, when you select PPPoE as your
connecting type, you have to set up the email or DDNS configuration in advance.
DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and domain name to a
dynamic Internet IP address. Select the Enable option to enable this feature. Then,
select the Provider from the pull-down list and enter the required information in the
Host Name, User Name, and Password boxes. Please note that you have to sign up
for DDNS service with the service provider first.
UPnP
The camera supports UPnP (Universal Plug and Play), which is a set of computer
network protocols that enable the device-to-device interoperability. In addition, it
supports port auto mapping function so that you can access the camera if it is behind
an NAT router or firewall. Select the Enable option to enable this feature.
Ports Number
- HTTP Port: The default HTTP port is 80.
NOTE If the camera is behind an NAT router of firewall, the suggested to be used is
from 1024 to 65535.
27
HTTPS
- Enable: Select this option to enable HTTPS, which is a secure protocol to
provide authenticated and encrypted communication within your network.
- HTTPS Port: Assign a HTTPS port in the text box. The default HTTPS port is
443.
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within a
certain range of IP addresses to access the camera. To disable this feature, select the
Disable option; otherwise, select the Accept option to assign the range of IP addresses
that are allowed to access the camera, or select the Deny option to assign the range of
IP addresses that are blocked to access the camera.
Disable: Select this option to disable the IP Filter function of the camera.
Accept
- IPv4: Assign a range of IP addresses that are allowed to access the camera by
entering the Start IP address and End IP address options. When you are
finished, click Add to save the range setting. You can repeat the action to assign
multiple ranges for the camera.
- IPv6: Enter the IP Address that is allowed to access the camera.
Deny
- IPv4: Assign a range of IP addresses that are blocked to access the camera by
entering the Start IP address and End IP address options. When you are
finished, click Add to save the range setting. You can repeat the action to assign
multiple ranges for the camera.
- IPv6: Enter the IP Address that is not allowed to access the camera.
For example, when you enter 192.168.0.50/192.168.0.80 in Start/End IP Address of
Accept > IPv4, the user whose IP address located within 192.168.0.50 ~ 192.168.0.80
will be allowed to access the camera. On the other hand, if you enter the IP range in
Start/End IP Address of Deny > IPv4, the user whose IP address located within the
range will not be allowed to access the camera.
Network >> Wireless Setting (for wireless model)
28
The camera supports WLAN while you use the wireless network. Select the Enable
option to enable this feature.
Wireless
- Network ID (SSID}: Keep the default setting of this option to connect the
camera to any access point under the infrastructure network mode. To connect
the camera to a specified access point, set a SSID for the camera to correspond
with the access point’s ESS-ID. To connect the camera to an Ad-Hoc wireless
workgroup, set the same wireless channel and SSID to match with the
computer’s configuration.
Click Site Survey to display the available wireless networks, so that you can easily
connect to one of the listed wireless networks.
29
List of searching results
- Wireless Mode: Select the type of wireless communication for the camera:
Infrastructure or Ad-Hoc.
- Channel: Select the appropriate channel from the list.
- Authentication: Select the authentication method to secure the camera from being
used by unauthorized user: Open, Shared-key, WPA-PSK, and WPA2-PSK. The
following table explains the four options:
Open
The default setting of Authentication mode, which
communicates the key across the network.
Shared-key
Allow communication only with other devices with
identical WEP settings.
WPA-PSK/
WPA2-PSK
WPA-PSK/WPA2-PSK is specially designed for the
users who do not have access to network
authentication servers. The user has to manually enter
the starting password in their access point or gateway,
as well as in each PC on the wireless network.
If you select Open or Shared-key as the Authentication mode, you need to
complete the following settings:
Encryption: Select the WEP option to enable the data encryption feature to
secure the camera within the wireless network.
Format: Once you enable the Encryption feature, you need to determine the
encryption format by selecting ASCII or HEX. ASCII format causes each
character you type to be interpreted as an eight-bit value. Hex format causes
each pair of characters you type to be interpreted as an eight-bit value in
hexadecimal (base 16) notation.
30
Key Length: Select the WEP key length you use: 64 bits or 128 bits.
WEP Key 1/2/3/4: Enter the WEP key(s) in the following boxes.
If you select WPA-PSK or WPA2-PSK as the Authentication mode, you need to
complete the following settings:
Encryption: Select TKIP or AES. TKIP (Temporal Key Integrity Protocol)
changes the temporal key every 10,000 packets to insure much greater security
than the standard WEP security. AES (Advanced Encryption Standard) is used to
ensure the highest degree of security and authenticity for digital information.
Pre-Shared Key: This is used to identify each other in the network. Enter the
name in the box, and this name must match the Pre-shared key value in the
remote device.
Loading...