Rosewill RNX-N250PCe User Manual

Wireless N Adapter RNX-N250PCe

Quick Installation Guide

Wireless N Adapter RNX-N250PCe Quick Installation Guide

1 Package Contents

Before getting started, please verify that your package includes the
following items :

1. Rosewill RNX-N250PCE Wireless N Adapter x 1

2. 5 dBi Antenna x2

3. Low Profile Bracket x1

4. Quick Installation Guide x1

5. Resource CD x1, including :

> Rosewill Wireless N Utility and Driver
>User Manual

Make sure that the package contains above items. If any of the
listed items is damaged or missing, please contact with your distributor.

2 Product Overview

The adapter is an 802.11n client device; it is designed to provide a
high-speed and unrivaled wireless performance for your computer or
notebook. With a faster wireless connection, you can get a better Internet
experience, such as downloading, gaming, video streaming and so on.
With the 802.11n technology, higher throughput improvements using
MIMO (multiple input, multiple output antennas), the RNX-N250PCE’s
transfer rate up to 300Mbps for maximum throughput. It can also
interoperate with other wireless (802.11b, 802.11g) products.

The adapter supports 64/128-bit WEP, WPA and WPA2 encryption to
prevent outside intrusion and protect your personal information from
being exposed.

The adapter is easy to install and manage. The Quick Setup Wizard
guides you step-by-step through the installation process; the Rosewill
Wireless N Client Utility helps you create a wireless connection immediately.

With unmatched wireless performance, reception, and security protection,
the RNX-N250PCE is the best choice for easily adding or upgrading
wireless connectivity to your notebook and computer.

1

Wireless N Adapter RNX-N250PCe Quick Installation Guide

3 System Requirement

You must have at least the following

●

A desktop PC with an available working PCI-Express slot

●

At least a 300MHz processor and 32MB of memory

●

Windows OS for Win98SE, ME, 2000, XP, Vista, Win7

●

A CD-ROM Drive

●

A 802.11n 、802.11g or 802.11b Wireless Access Point/Router

(for infrastructure Mode) or another 802.11n、802.11g or 802.11b
wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode).

4 Driver and Hardware Installation

4.1 Driver installation of the Wireless PCI-E Adapter

Turn on the computer and Insert the Wireless 11N PCI-E Adapter
Driver CD in the CD-ROM drive. The Install Screen will appear. If not,
click the Start button and choose Run and enter D:\autorun.exe
(if ‘D’ is the letter of your CD-ROM drive)
Select Drivers, choose the modem of your product and operate
according to the instruction. The following is the step-by-step
instructions in Windows XP. The steps and screens are similar for
the other Windows operating systems.

►

Select language and then click Next

2