Page 1
USB 3.0 Gigabit Ethernet Adapter
RNG-406U
User Manual
Page 2
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
Contents:
Chapter 1: Introduction .................................... 3
1.1 Product Introduction ...................................................... 3
1.2 Features ........................................................................ 3
1.3 System Requirements ................................................... 4
1.4 Package Contents ......................................................... 4
Chapter 2: Getting Started ............................... 5
2.1 Hardware Installation ..................................................... 5
2.2 Driver Installation .......................................................... 5
2.2.1 Installation for Windows XP / Vista / 7 .................... 5
2.2.2 Installation for Mac OS X ....................................... 7
2.3 Hardware Verify ............................................................. 8
2.3.1 Verifying for Windows ............................................ 8
2.3.2 Verifying for Mac OS X......................................... 10
Appendix A: Specification .............................. 11
2
Page 3
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
Compliant with Universal Serial Bus 3.0
Specification, Revision 1.0
Compatible with USB Specification, Revision 2.0
Supports full duplex operation with IEEE 802.3x flow
control and half duplex operation with back-pressure
flow control
Compatible with IEEE 802.3, IEEE 802.3u, IEEE
802.3ab
Supports IEEE 802.3az (Energy Efficient Ethernet)
auto-detect usage for energy saving adjustment
Supports crossover detection and auto-correction
Supports advanced link down power saving when
Chapter 1: Introduction
1.1 Product Introduction
Thank you for purchasing Rosewill’s RNG-406U. This
USB 3.0 to Gigabit Ethernet Adapter add a single RJ-45
Ethernet networking port to a USB enabled (USB 3.0)
computer system with link speeds up to 1000 Mbps.
Backwards compatible with USB 2.0 computer system
and 10/100 Mbps Ethernet networks, this compact and
portable adapter is ideal as a desktop replacement
network adapter or laptop accessory.
1.2 Features
3
Page 4
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
Ethernet cable is unplugged
Supports Wake-on-LAN
Upstream port: USB 3.0 type A
Downstream port: RJ45
LEDs indicate the status of Power status and
Ethernet connection
Supports Windows® XP/Vista/7/8 (32/64 bit); Mac
OS X 10.6/10.7/10.8
Windows® XP/Vista/7 (32/64 bit); Mac OS X 10.5 or
later
Available USB 2.0 port (Recommend USB 3.0 port)
1 x RNG-406U - USB 3.0 to Gigabit Ethernet Adapter
1 x Driver CD
1 x User Manual
Note:
Make sure that the package contains the above items. If any of the listed
items are damaged or missing, please contact with your distributor.
1.3 System Requirements
1.4 Package Contents
4
Page 5
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
Chapter 2: Getting Started
2.1 Hardware Installation
1. Plug the USB 3.0 to Gigabit Ethernet Adapter directly
into an available USB 2.0 port (Recommend USB 3.0
port) on your computer.
2. Connect one end of your network cable into the RJ45
port of USB 3.0 to Gigabit Ethernet Adapter.
3. Connect the other end of the network cable into an
available Ethernet port on your router, switch, or any
other networking device.
2.2 Driver Installation
The following section shows you how to install the USB
3.0 to Gigabit Ethernet Adapter driver on different
operating systems.
Important! Do not connect the USB 3.0 to Gigabit
Ethernet to your PC before the install.
2.2.1 Installation for Windows XP / Vista / 7
1. Insert the provided CD into your disk drive. The
CD-ROM will start automatically. The following screen
will show up and please click “Install Driver”.
5
Page 6
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
*Note: Actual image may vary
Note: If the install program doesn’t run automatically,
please locate and double-click on the Autorun.exe
file in the CD to launch the install program.
2. Please click “USB 3.0 1000M”.
*Note: Actual image may vary
3. Follow the instructions on screen to install the driver.
6
Page 7
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
2.2.2 Installation for Mac OS X 10.5 or Later
1. Insert the provided CD into your CD-ROM drive.
2. Double-click the “Ethernet Adapter” disc icon,
double-click “Drivers” folder.
*Note: Actual image may vary
3. Double-click “USB 1000M” folder, and then double
click the “USB 3.0 1000M” folder, then click “For Mac
OS X 10.6/10.7/10.8” file to launch the installer.
7
Page 8
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
*Note: Actual image may vary
4. Follow the instructions on screen to install the driver.
After driver installation is complete, you must restart
your computer.
2.3 Hardware Verify
2.3.1 Verifying for Windows
1. Click on the “Device Manager” tab in the Windows
Control Panel.
Start > Control Panel > Device Manager
8
Page 9
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
2. Entry “Network adapters” item, and you can read
“ASIX AX88179 USB 3.0 to Gigabit Ethernet
Adapter” in the Device Manager.
9
Page 10
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
2.3.2 Verifying for Mac OS X 10.5 or Later
1. Choose About this Mac from the Apple menu.
2. Click on More Info…
3. In the Contents sidebar select USB from the
Hardware section.
4. Scroll the list to reveal the USB 3.0 to Gigabit
Ethernet Adapter information
10
Page 11
USB 3.0 Gigabit Ethernet Adapter - RNG-406U- User’s Manual
Spec
Chipset
Asix AX88179
Standards
IEEE802.3, IEEE802.3u, IEEE802.3ab,
IEEE802.3az(Energy Efficient Ethernet)
Speed
10/100/1000Mbps
Connectors
1 x RJ45
Interface
USB 3.0
LEDs
Link, Activity
Dimension
Adapter: 2.56 x 1.1 x 0.71 in (65 x 28 x 18 mm);
Cable Length + USB Connector 21.26 in (540
mm)
Weight
0.11 lb (50 g)
Appendix A: Specification
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com
for complete warranty information and future
support for your product.
Rosewill Customer Service Hotline: 1-800-575-9885
Rosewill Customer Service Support:
techsupport@rosewill.com
11
Loading...