Rosewill RM-6500 User Manual

MouseRM-6500

user manual

Install Your Wireless Mouse

Hardware Installation

Installing Batteries:

1. Remove the batteries cover from the

top of your mouse.

2. Insert two AAA Alkaline Batteries into

the battery compartment.

Push backward the top shell of this mouse.

3. Replace the cover carefully.

• Once the batteries are placed correctly in the mouse, the optical LED located at the

mouse bottom will light up.

Connect the Mouse:

To connect to a USB port (Windows 98SE or higher required), connect the USB receiver

to the USB port on the computer.

Establishing a Communication Link

A. The R/F mouse is “Plug and Play”, you may have to set the channel for the products.

If you find the mouse can not work smoothly or the mouse has been interfered by the

neighbor R/F product or you change the new battery, you can take the following steps:

1. Press the reset button on the receiver.

2. Press the reset button on the bottom of the mouse
Follow the above 2 steps until your R/F mouse find the best channel ID.

B. Strong Power Saving

1. USB receiver plugged into the mouse will turn off the

power.

2. The R/F mouse has feature of strong power saving:

If you didn’t use the mouse, the mouse will go into

“The Sleep Mode”, it can save more power.

Receive

Power on

Push out

Power Saving

Push in

Power off

3. Button wake-up: If you want to re-use the mouse while it is at “The Sleep Mode”,
you can press the button of mouse.

4. You can re-utilize the mouse successfully after pressing the button of mouse.

Important Note

• To optimize the performance of your R/F reception, please make your receiver at
least 8 inches (20 cm) away from electronic devices, such as monitor, speakers or
external storage devices.

• Please avoid your R/F optical mouse to work on a metal surface. Metals such as iron,

aluminum or copper shield, the radio frequency transmission may slow down the
response of the mouse or cause the mouse to fail temporarily.

• This R/F mouse will enter a suspend mode as your computer sleeps. Please slightly

press the buttons to wake up the mouse when the mouse is “at the sleep mode”.

• Never use the R/F mouse on a glass or mirrored surface.

• Always use Alkaline batteries ONLY. Do not mix used and new batteries in one mouse.

• Please push gently otherwise the connector will be rejected.

Utilizing the latest wireless RF technology, this mouse can work from any directions or
angles even when objects are placed between your mouse & the receiver.
You can locate the device freely and enjoy its convenience.

Waste electrical and electronic products must not be disposed of with
household waste.

Please refer to the retailer from whom you purchased this item for

disposal instructions.

Packing materials should be recycled using local facilities

Thank you for purchasing a High-Quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

If you have any question while using our products, please visit our website : www.rosewill.com