Rosewill RM0830 User Manual

Restorable Optical Wireless Mouse

RM0830 USER’S MANUAL

Important Ergonomic Information

Some experts believe that using any mouse or trackball may cause serious injury
to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in
these areas, see a qualified health professional.

TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:

) Take frequent breaks, get up and walk around several times every hour.
) Vary your tasks throughout the day.
) Keep your shoulders relaxed with your elbows at your side. Position your

keyboard and mouse so you do not have to reach.

) Adjust your chair and keyboard so your upper arms and wrists are straight.
) Avoid resting your wrists on sharp edges.

System Requirement

) Mouse compatible with standard Microsoft OS
) 3

rd

button and wheel function require Win98/ ME/ 2000/ XP

) If your computer’s operating system is Windows 98/ 98SE, please prepare

the Windows98 or 98SE compact disk for system’s request during the
installation of mouse.

) 1st, 2nd and wheel are compatible with MAC

Before you begin

) Keep this installation guide for future reference! It contains Important

Troubleshooting Information.

) Keep your old PS/2 or USB mouse as back-up devices.

Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future

support for your product.

Restorable Optical Wireless Mouse Page 1 of 11 2.2 Edition

Restorable Optical Wireless Mouse Page 2 of 11 2.2 Edition

Getting Started

Congratulations on your purchase of an 800dpi restorable Wireless Optical
Mouse. By using the advanced RF technology a 360°operation is possible and
no line-of-sight is required between the receiver and the mouse. The 800dpi
high resolution will bring users the best operation accuracy and efficiency,
especially when the pixel of display over 1024*768 pixel. It operates at twice the
speed and only requires 1/4 of the space in comparison to a 400dpi mouse.
Battery or current consumer is always the key issue for a wireless product. In

RM0830, two methods designed for power saving, the patent of ID power on/ off

function and receiver store switch.

RM0830 can be power off by pressing ID button for 3 sec. There is a switch

is the reviver store. By putting the receiver into the mouse, the power can be
shout down. The way to open the top cover and store the receiver is other
unique patent showing this mouse. By these special designs you will find it is so
good to have a mouse like RM0830.

Package Contains

Your RM0830 Mouse package includes the following:

1. Mini wireless optical mouse

2. Sub-thumb size receiver

3. User’s manual

4. 2 AAA alkaline batteries

Note：If any part is missing, please contact your dealer for a replacement
immediately.

Precaution

The optical mouse can not work on a glass or mirror surface. Avoid operating

this mouse on a glossy surface; otherwise, this mouse may not operate normally.

For consideration of saving battery power, it is strongly recommended to operate

an optical mouse on a bright surface with fine texture to obtain lower power
consumption of the high illumination LED. A very dark surface will cause higher
power consumption.

Restorable Optical Wireless Mouse Page 3 of 11 2.2 Edition

For optimal performance, place the receiver at least 8 inches or 20 centimeters

away from other electrical devices, such as the computer, the computer monitor,
speakers or other external storage drives.

For a better transmission distance, avoid using this device on a metal plate or

desktop because a large surface of iron, aluminum, copper and other metal will act
as a shield or ground to the RF antenna of the mouse and receiver. Operating on a
metal surface may shorten the transmission distance.

If your notebook computer has a metal (contains Al or Mg) case, the metal

housing of the LCD panel will isolate partial radiation of the RF signal from the mouse.
This could possibly result in reducing the distance of transmission when you operate
the mouse right in front of the notebook and when the receiver is connected on the
back of the notebook. However, the RF mouse should work properly while you are
operating the mouse just beside your desktop computer.

Hardware Installation Guide (Mouse)

Step 1. Take out the receiver and Inserting the Batteries

1. Open the top cover as follow

2. A small in front of the mouse button case. Push it and open the top case.

3. Take the receiver out and put 2 AAA batteries in correct place.

4. Close the top cover.

Step 2. Synchronize the RF Mouse (Pairing)

If the mouse is in sleep mode click the mouse button once to wake it up.

1. Plug the receiver into the notebook/ Computer’s USB ports or into the USB

HUB/ keyboard’s USB port.

2. Bring the mouse within 1 ft range from the receiver

3. Hold the mouse upside-down and use a pointed object, such as a pen tip, to

click the “CONNECT” button (ID button) once.

NOTE: Do Not depress the CONNECT button longer then 1.5 seconds. The LED

will go off when the “CONNECT” button is pressed down. (You just
power off the mouse)

* Poke the Mouse Connect button first, and then click the receiver’s button!

Restorable Optical Wireless Mouse Page 4 of 11 2.2 Edition