Rosewill RHUB-310B, RHUB310R, RHUB-310, RHUB310W, RHUB-310S User Manual

Page 1
7 port USB2.0 HUB
RHUB-310
RHUB-310R
RHUB-310S
RHUB-310W
User Manual
Page 2
7 port USB2.0 HUB User Manual
Supports USB 2.0 Standard
This USB HUB is a 7-port device used to bridge the USB interfaced
peripherals to your desktop or laptop by providing one upstream
port and seven downstream ports. This device complies with USB
Spec. V1.1 and V2.0. It offers you the flexibility of 3 data rates. The
12Mbps (full speed) ,1.5Mbps (low-speed) and 480Mbps for
high-speed device.
System Requirements
1. A USB host controller installed on the computer.
2. Any OS that supports USB, like
Windows 98se, windows me, windows 2000, windows XP &
windows VISTA
Mac OS 8.6 +
Linux , OS/2 warp with driver installed.
Specification:
Standards USB Rev. 2.0, OHCI Rev. 1.0a, EHCI Rev. 0.95 Power Mode Self-power mode / DC adaptor USB Connectors A-type downstream*7, mini B-type upstream*1
Driver Support
Data Transfer Rate 1.5/12/480Mbps OCP Yes, (USB 500 mA) Power Supply 5V, 2A
Temperature
Humidity
Win98se / Win XP / Win 2000 / Win Me / Win Vista / Mac OS
Operating: 0°C - 55°C Storage: 0°C - 64°C Operating: 10% – 90% Storage: 5% - 95%
2
Page 3
7 port USB2.0 HUB User Manual
Feature
1. Compliant with USB Specification Rev. 2.0 (Data Rate 1.5/12/480
Mbps)
2. Backward Compatible to USB 1.1
3. 7 (Max.) downstream facing parts high-speed (480Mbps),
full-speed(12Mbps), and low-speed (1.5Mbps) transaction.
4. Supports self-powered mode & DC Adapter.
5. Supports Over-current detection and individual power control.
Installation
Using DC adapter
Plug the DC plug into DC jack located on the rear panel of this Hub
1. Plug the AC adapter into an electronic outlet.
2. Plug the mini B-type connector into the “upstream”
3. Plug the A-type connector into the PC host port
4. Connect USB devices to the Hub downstream 1-7

Using USB bus-powered

1. For bus-powered mode, the USB provide 500mA for all
downstream & hub, each port shares with 100mA current.
2. Plug the mini B-type connector into the “upstream”
3. Plug the A-type connector into the PC host port
4. Connect USB devices to the Hub downstream 1-7
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and
future support for your product.
3
Loading...