Rosewill RHUB-300 User Manual

USB 2.0 7 PORT HUB RHUB300

User Manual

USB 2.0 7 PORT HUB RHUB300 User Manual

Features

z USB 1.1 and 2.0 Compliant z Fully Backward Compatible with USB 1.1 z Up to 480 Mbps (Megabits-Per-Second) Data Transfer Rate z 40 Times Faster Than The USB 1.1 z Seven Independent, Fully Functional, Downstream Ports z Hot Swappable Plug-n-Play z 7 USB Type A Ports z Power & USB enabled indicator LED z No device drivers required for Hub installation z PC Power Management z Power Adapter (Not Included) : DC 5V/2A

System Requirements

z Windows® 98SE, 2000, ME, XP z USB 2.0 Compliant System

Mac

z Mac OS 8.6 to 9.x®, Mac OS X or greater z USB 2.0 Compliant System

Front Panel LED Indications

LED Status Description POWER ON Lights up when the USB 2.0 Hub is r eceiving p ower from the power source at the corr ect

current level

USB Activity ON Lights up when connecting the USB 2.0 Hub to the computer’s USB port

Hardware Installation

1. Plug the Hi-Speed USB 2.0 Cable (Typ e B end) into the up stream port on the Hi-Speed USB 2.0 Hub.

2. Plug the Hi-Speed USB 2.0 Cable (Type A end) into your compu ter’s Hi-Speed USB 2.0 Port. Important Note : The Hub must be connected to a USB 2.0-compliant host in or der to functi on in high-speed mod e (480Mbps data rate). If connected to a USB 1.1-compliant host, the Hub will operate only in low or full-speed mode(15/12Mbps)

3. Upon powering up your computer, the USB 2.0 hub will be recognized by the computer’s operating system.

4. Once complete, you are ready to plug all peripheral devices into your new USB 2.0 Hub.

Specification

Ports 7 Type A USB ports Power Mode Self or Bus Powered, Output voltage(per port) +5V DC Output voltage(per port) 500mA (max.) Operating Temperature 5~40 oC Storage Temperature -20-60 oC Humidity 0~80% RH

Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.