Page 1
Professional Blender 1400W
RHPB-18001
User Manual
Page 2
Page 3
Table of Contents
I. Important Safeguards ............................
II. Specifications......................................... 3
III. Operation Instructions............................ 3
IV. Features................................................. 4
V. Cleaning & Maintenance........................
VI. Storage...................................................
Page
1
4
4
Page 4
Professional Blender 1400W
RHB-18001
Important Safeguards
The following basic safety precautions apply when using the blender and other electrical
appliances.
Read all instructions and retain for future reference.
•
Do not touch jar surfaces that may be hot. Use provided handles.
•
To protect against electrical shock, do not immerse cord, plugs, motor base in water or other liquids.
•
Close supervision is necessary when any appliance is used by or near children.
•
Remove plug from outlet when the appliance is not in use, before putting on or taking off
•
parts, and before cleaning. Allow to cool before handling.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
•
or is dropped and damaged in any manner.
The use of accessory attachments, is not recommended. It may cause fire, electric shock or
•
injuries to persons.
Do not use outdoors.
•
Do not let cord hang over edge of table, counter or touch hot surfaces.
•
Do not place on or near a hot gas electric burner or in a heated oven.
•
Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
•
Where applicable, always attach plug to appliance and check that the control is OFF before
•
plugging cord into wall outlet. To disconnect, turn the control to OFF, then remove plug from
wall outlet.
Do not use appliance for purposes other than intended use.
•
Avoid contact with moving parts.
•
Keep hands and utensils out of container while blending to reduce the risk of severe
•
injury to persons or damage to the blender. Your own safe-to-use scraper may be
used but only when the blender is not running.
The vented lid should remain in place, over the cover opening, when blending hot liquids.
•
Blades are sharp. Handle carefully.
•
Do not use product if blades are curved or damaged.
•
Do not try to remove blending jar from the motor base during operation.
•
Never operate the product without any liquid in the jar.
•
Never operate the product while empty.
•
Never try to defeat or override the interlock switch mechanism. Make sure the accessory is
•
completely installed before operation.
Do not overfill the jar.
•
Always operate blender with cover in place.
•
1
Page 5
Professional Blender 1400W
Vented Lid
Cover
RHPB-18001
Whisk Bar
Speed Regulator
Power Switch
LED Light
Blending Jar
Motor Base
Pulse Switch
Program
2
Page 6
Professional Blender 1400W
RHB-18001
Specifications
Model RHPB-18001
Voltage 120 V
Watts 1400W
Capacity 2L
Dimensions L x W x H 8.11 x 8.90 x 20.44 in
Product Weight 9.92 lbs
Cord Length 39.37 in
Cup Material BPA-Free
Material / Finish Stainless Steel and Plastic
Operation Instructions
1. Power Switch
“O” = Power Off
“ I ” = Power On
When powered on, the breathing LED light will flash, then product will go into standby mode
and be ready for use.
2. Stepless Speed Regulator Knob
“ ” = Stop
“MIN” = Minimum Speed
“MAX” = Maximum Speed
After powering on the blender, turn the Speed Regulator Knob to the “MIN” position, and the
blender will start to work at minimum speed. You can control the speed by rotating the knob.
When product is working, the LED will remain light.
Note:
If you switch off the product using the Power Switch, but the Speed Regulator Knob is not in “ ”
position, the blender will not work when you turn it on again, and the breathing LED light will flash.
To reset, you need to turn the Speed Regulator Knob to “ ” position, then rotate the knob
between “MIN” and “MAX”. The blender will work again. This is designed to prevent the
machine from accidentally starting.
If blending time exceeds 10 minutes, the machine will go into standby mode automatically.
You will need to reset again by turning the Speed Regulator Knob to “ ” position, then
rotate the knob between “MIN” and “MAX”. We suggest the working time not exceed 2
minute intervals.
3. Pulse Switch: Hold the switch down to pulse at maximum speed.
4. Program Buttons: 3 pre-programmed operating modes: “Smoothie”, “Ice” and, “Sauce”.If
the blender is working under “Smoothie” mode, pressing the “Smoothie” button again will
pause the blender. If another program is selected, the blender will change to that mode. If
any of these 3 programs are in use, the Speed Regulator Knob and Pulse Switch will not work.
3
Page 7
Professional Blender 1400W
RHPB-18001
Features
1. Blending Jar: 2 Liter capacity, impact-resistant–Tritan, SUS 420 Stainless Steel blades,
food-grade materials, BPA- Free.
2. Whisk Bar: The whisk bar is only intended for mixing / pushing foods closer to the blades
during blending, not for other purposes. Before usinge the whisk bar, make sure the cover is
in proper position.
3. Speed: 33000 RPM Max Speed.
4. Low Noise Level: Less than 85 dB (1 meter from the product, background noise is less
than 65 dB).
5. Safety and Protections:
• Safety Switch – If the blending jar is not correctly positioned or the blending jar is removed
during blending, the machine will not work. You will need to put the blending jar in
proper position, rotate the Speed Regulator Knob to “ ” position, then resume.
• Overheat Protection – If the blender operates for extended periods of time, the thermal
limiter will stop the machine to protect its motor from overheating. If thermal limiter
activates, reduce load of the blending jar and wait at least 30 minutes to let the motor cool
down.Then resume use. If LED light is flashing but product still does not work, wait another
10 to 20 minutes.
• Overcurrent Protection – If blending very hard foods (or big quantities) incorrectly, the
blades may become blocked and the current limiter will stop the machine. If current limiter
activates, switch off the product and remove the items causing blockage. Then resume use.
Cleaning & Maintenance
1. Before cleaning, make sure the power is switched off and Speed Regulator Knob is in “ ”
position. Then unplug the blender from power source.
2. Use water to clean the blending jar, but not chemical agents or other liquids.
3. To clean the motor base, use only dry cloths. Nnever use wet cloths or immerse the motor
base into water.
4. If the product operates with abnormal noise, or shaking, stop use and contact Rosewill Tech
Support. Never repair the product yourself.
Storage
After using the blender, repack and store it in a dry place, away from sun exposure.
1.
Keep out of children’s reach.
2.
Ensure the product is dry before storage.
3.
4
Page 8
Technical Support Information
techsupport@rosewill.com 1-800-575-9885
---------------------------------------------------------------------------------Thank you for purchasing a quality Rosewill product.
Please register your product at www.rosewill.com
for complete warranty information and support for your product.
Help protect our environment!
Please remember to respect local regulations;
hand in non-working electrical equipment to an
appropriate e-waste disposal.
RHPB-18001_A
Loading...