Rosewill RCR-IM5001 User Manual
RCR-IM5001
Introduction
As a Rosewill quality product, RCR-IM5001 has been equipped with multiple memory slots and
can fit in 3.5” drive bay.
All 5 memory slots are active, which allows data copy/transfer between different memory cards.
(Including SD and Micro SD or MS and M2)
3 X USB ports and 1 X eSATA port are provided for extra connection. Two LEDs indicate data
reading/transferring process.
Features
• Supports 75 different types of memory cards
• With two face plates (silver/black)
• Supports SDHC /MC Pro HG Duo
• Supports data transfer between memory slots
(including SD and Micro SD or MS and M2)
• All in 1 Memory Card Reader + 3 ports USB 2.0 Hub + E-SATA port one 3.5 compact design
• 5V DC Jack allows you to power eSATA devices
Specification
• Internal connection : Onboard USB 2.0
• CF Slot : CF I / CF I Pro / CF I Pro II / CF I Elite Pro / CF I ultra II / shoot & Store CF / CF II /
CF II Magicstor / CF II Ultimate /CF -Digital Film / CF 3.0 / CF 4.0 / EXTREME III CF / EXTREME CF
/ULTRA II CF / HS CF / XS-XS CF / CF ELITE PRO / CF PRO / CF PRO II / IBM MD / HITACHI MD /
MAGIC STOR MD
• SD/MMC Slot : SD / EXTREME SD / EXTREME III SD / ULTRA SD / ULTRA II SD/
ULTRA II SD PLUS / ULTRA-X SD / ULTRA SPEED SD / SD PRO / SDHC / SD ELITE PRO / HS SD /
MMC / MMC 4.0 / MMC 4.2 / HS MMC / HS RS MMC / RS MMC / RS MMC 4.0 / MMC Mobile /
MMC Plus /MMC Micro / DV-MMC / mini SD / HS mini SD
• MS Slot : MS / MS PRO / MS DUO / MS PRO DUO / MS MG PRO / MS PRO MG HIGH SPEED /
MS PRO MG EXTREME III / MS MG / MS MG DUO / MS MG PRO DUO / EXTREME MS PRO/
MS SELECT / EXTREME III MS PRO / ULTRA II MS PRO / HS MS PRO DUO / MS ROM /
MS PRO MAgic Gate / MS DUO Magic Gate / MS Pro HG Duo
• M2/MICRO SD Slot : MICRO SD / MS MICRO (M2)
• Extreme Digital Slot : Extreme Digital Media Cards / Extreme Digital M type /
Extreme Digital H type
• Requires adapter : HS RS MMC / RS MMC / RS MMC 4.0 / MMC Mobile / MMC Micro /
Mini SD / HS mini SD
• Operating Temperature : 0 ~ 50ºC
• Operating Humidity : 10% ~ 95%
• Power Input : DC 5V
• LED indicator : Power(Blue), Data transfer(Green)
• Operating System Support : Windows ME/2000/XP/Vista, Linux Kernal 2.4 or later
Internal Card Reader RCR-IM5001 User Manual
Pre - installation
WARNING
Electrostatic discharge (ESD) can damage system components. Use an ESD controlled workstation. If such a
workstation is not available, wear an antistatic wrist strap or touch an earthed surface before handling any PC
components.
A
B-1
B-2
a c
MS/MSPro/MS Duo/MS Pro Duo
SD/MMC/RS MMC
USB 2.0 USB 2.0 USB 2.0
CFI/CFII/MD
Extreme Digtal M2 / Micro SD
b
DC 5V
e f
A. Card Reader
a. 5 x memory card reader slots
b. 3 x external USB 2.0 port
c. 2 x LEDs
eSATA
e. DC 5V output port
f. eSATA
Contents
• Card reader/writer
• Black and silver front panels
• DC to DC Cable
• Screws
• User manual
B. Installation Steps
B-1. Remove the cover of an empty 3.5’’ external drive bay.
Switch off the system power and open the case side panel.
B-2. Insert the Internal card reader into the drive bay until it is
in line with front panel of the chassis.
B-3
B-4
B-3. Secure the card reader with the screws provided or the
case 3.5" mounting system.
B-4. Connect the internal USB, SATA connectors to the
corresponding motherboard headers. Connect the power
4-pin molex connector to the PSU peripheral connector.
USB 10-pin
A
header
NOTE: If the connectors are not apparent on the board consult
your motherboard manual. Connecting the panel to the
wrong headers may result in motherboard damage.
SATA
B
connector
PSU 4-pin
C
molex
connector
Loading...