Rosewill RSVA-11001, RSVA-12001, RDVR-H08, RCMR-14CCDIR, RCMR-14CMOCIR User Manual
8 Channel H.264 DVR + 4 IR Camera
RSVA-11001/ RSVA-12001
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
1
WARNING
Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could
decrease the performance of DVR and damage the machine.
Do not touch the power plug or case with wet hands as this could result electric shock.
Do not forcedly bend or put heavy object on power cable as this could result in injury to personal or
equipment.
Do not operate with damaged power cord or loose electrical outlet as this could result in electric
shock or accident.
Please use individual power instead of share electrical outlets with other electrical equipment as this
could result in damage or accident.
Do not attempt to service this DVR by yourself as it may expose you to dangerous voltage or other
hazards. Please refer all service to the qualified servicing distributor.
Do not open the covers or insert any object into DVR.
CAUTION
Do not place the machine on an uneven surface or it would decrease the DVR efficiency or malfunction.
Avoid any shock or bumping of the DVR while recording. Improper handling could damage the system.
OSD switching between VGA and BNC is automatic.
If you found the monitor is working, but the front panel and USB mouse are locked up.
Press and hold the “fast forward” button on the remote for 5 seconds to switch OSD setting.
CAUTION
Make sure the voltage selector switch is
set to appropriate setting before plug in!
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
2
CONTENTS
1. Specification .................................................................................................................................3
2. Front Panel....................................................................................................................................6
3. Backplane .....................................................................................................................................7
4. DVR Installation ............................................................................................................................8
5. System Operation .........................................................................................................................9
6. Display Setup .............................................................................................................................. 11
7. Search ................................ ................................................................................................ ......... 13
8. Main Menu ................................................................................................................................... 15
8.1 Camera Setup ...................................................................................................................... 16
8.2 Record Setup ....................................................................................................................... 18
8.3 Alarm Setup ......................................................................................................................... 21
8.4 Motion Detection .................................................................................................................. 21
8.5 Network Setup ...................................................................................................................... 22
8.6 Log Search ........................................................................................................................... 24
8.7 Backup ................................................................................................................................. 25
8.8 System ................................................................................................................................. 26
8.8.1 Time Setting .............................................................................................................. 27
8.8.2 HDD Setup ................................................................................................................ 27
8.8.3 Display Setting ........................................................................................................... 28
8.8.4 System Information .................................................................................................... 29
8.8.5 User Password .......................................................................................................... 30
8.8.6 System Language ...................................................................................................... 30
8.8.7 Audio Setting ............................................................................................................. 31
8.8.8 System Maintenance ................................................................................................. 31
9. Cell Phone Monitoring Operation .............................................................................................. 33
10. H264 Player Operation ............................................................................................................... 57
11. Web Operation ............................................................................................................................ 59
12. Appendix ..................................................................................................................................... 71
12.1 How to search and playback the footage step-by-step. ......................................................... 71
12.2 How to backup the footage step-by-step. .............................................................................. 74
12.3 How to setup the Network step by step. ................................................................................ 77
12.3.1 Static: ......................................................................................................................... 77
12.3.2 DHCP: ........................................................................................................................ 84
12.3.3 PPPoE: ...................................................................................................................... 89
12.3.4 How to set up a 3G connection for your DVR? ........................................................... 91
12.4 Email Setup .......................................................................................................................... 92
12.5 DDNS Setup ......................................................................................................................... 93
13. Default Setting ............................................................................................................................ 99
14. HDD Support List...................................................................................................................... 100
15. USB Flash Memory Stick Support List .................................................................................... 101
16. Operation System For Mobile Phone Application .................................................................. 102
17. 3G Data Rate ............................................................................................................................. 102
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
3
1. Specification
H.264 8CH DVR (RDVR-H08)
General
Operation System
LINUX
PTZ Control
Built-in RS485, support PELCO-P & PELCO-D, MIKAMI
Senor & Alarm I/O
4in/1out
Mouse Control
YES
Remote Control
YES
Compatible OS
Windows 2000, XP, Vista and 7
Power Supply (power adaptor included)
DC 12V (AC100V~240V 50/60HZ)
Power consumption
10 ~ 15 W (exclude HDD)
Working Temperature
32℉ ~ 114.8℉ (0℃ ~ 46℃)
Dimension
8.7”(W) x 11.3”(D) x 1.9”(H) (220mm x 288mm x 48mm)
Weight
3.5 lbs. / 1.6 kg (DVR only)
Video
Video Compression
H.264
Video System
NTSC / PAL
Video Input
BNC 8-channel
Video Output
BNC 1-channel, VGA 1-channel
Display Resolution NTSC
D1(720x480)
Display Resolution PAL
D1(720x576)
Display Frame Rate NTSC
240 fps
Display Frame Rate PAL
200 fps
Display Modes
Full Screen/Quad/PIP/S.E.Q
HDMI Interface
NO
Max. VGA Resolution
1440x900
Audio
Audio Input
RCA 4-channel
Audio Output
RCA 1-channel
Audio Alarm Modes
Motion Detection, Video Loss, HDD Error/Full
Intercom
NONE
Audio Compression
8kHz*16bit ADPCM
Recording
Record Resolution NTSC
D1(720x480), HD1(720x240), CIF(352x240)
Record Resolution PAL
D1(720x576), HD1(720x288), CIF(352x288)
Recording Frame Rate NTSC
60fps@D1, 120fps@HD1, 240fps@CIF
Recording Frame Rate PAL
50FPS@D1, 100fps@HD1, 200fps@CIF
Recording Mode
Always / Schedule / Motion detection / Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
4
Playback Mode
PLAY / FF / SLOW / FWD / Frame by frame
Playback Search
Date/time, Event list
Multi-Channel Playback
Local: Playback 8 channels at the same time
Network: Playback 1 channels at the same time
Recording Pack Time
5/10/15/20/30/60mins file time selectable
HDD Interface
supports up to 2TB SATA HDD
Backup
USB 2.0 external hard drive (Up to 2TB, FAT 32) /
USB 2.0 flash drive / USB 2.0 CD/DVD-RW / Network
Network
Network Interface
RJ45, 10M/100M
Network Protocol
Support TCP/IP, DHCP, DDNS, SMTP , PPPoE, 3G WCDMA
Internet Viewing
Internet Explorer 6 or Higher (Max. 8 users at once)
Smart Phone Viewing (via 3G)
iPhone, Android, Blackberry, Windows Mobile and Symbian S60
Tablet PC Viewing
iPad, Android
Support Network Time Protocol (NTP)
YES
Support Free DDNS
YES
1/4” CCD IR Camera (RCMR-14CCDIR)
1/4” CMOS IR Camera (RCMR-14CMOCIR)
General
General
Power Consumption
70mA(IR OFF) / 260mA(IR ON)
Power Consumption
70mA(IR OFF) / 260mA(IR ON)
Power Supply
12V DC
Power Supply
12V DC
Operating Temperature
23℉ ~ 149℉ (-5℃ ~ 65℃)
Operating Temperature
23℉ ~ 149℉ (-5℃ ~ 65℃)
Weather Proof
IP66
Weather Proof
IP66
Dimension
2.6” x 2.5” x 4.1”
(66 x 64 x 104 mm)
Dimension
2.6” x 2.5” x 4.1”
(66 x 64 x 104 mm)
Weight
0.73 lbs. / 330g (camera only)
Weight
0.73 lbs. / 330g (camera only)
Video
Video
Image Sensor
1/4” Sony CCD
Image Sensor
1/4” CMOS
TV System
NTSC
TV System
NTSC
Effective Pixels (NTSC)
510(H)X492(V)
Effective Pixels (NTSC)
640(H)X480(V)
Horizontal Resolution
420 TV Line
Horizontal Resolution
420 TV Line
Electronic Shutter (NTSC)
1/60-1/100.000sec
Electronic Shutter (NTSC)
1/60-1/100.000sec
S/N Ratio
Max. 48dB (AGC off)
S/N Ratio
Max. 48dB (AGC off)
Backlight Compensation
Auto
Backlight Compensation
Auto
Video Output
1.0Vp-p. 75ohm (BNC)
Video Output
1.0Vp-p. 75ohm (BNC)
Lens
Lens
Len
2.9 mm
Len
4 mm
View Angle
75 Degree
View Angle
60 Degree
Night Vision
Night Vision
IR Distance
49.2 ft. (15M)
IR Distance
49.2 ft. (15M)
IR LED
21pcs
IR LED
21pcs
Min Illumination
0 LUX / F1.2
Min Illumination
0 LUX / F1.2
Mechanical IR cut filter
N/A
Mechanical IR cut filter
Yes
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
5
Package content
RSVA-11001
RSVA-12001
H.264 8CH DVR (RSVR-H08) x 1
1/4” CCD IR Camera (RCMR-14CCDIR) x 4
Slim Cable (82ft./25M) x 4
4 Way Power Cable Splitter x 1
Camera Bracket x 4
Camera Adapter (12V) x 1
DVR Adapter (12V) x 1
RCA Video Cable (2M) x 1
BNC TO RCA Convertor x 1
Remote Control x 1
USB Mouse x 1
Quick Manual x 1
Quick Installation Guide x 1
Software CD x 1
H.264 8CH DVR (RSVR-H08) x 1
1/4” CMOS IR Camera (RCMR-14CMOSIR) x 4
Slim Cable (82ft./25M) x 4
4 Way Power Cable Splitter x 1
Camera Bracket x 4
Camera Adapter (12V) x 1
DVR Adapter (12V) x 1
RCA Video Cable (2M) x 1
BNC TO RCA Convertor x 1
Remote Control x 1
USB Mouse x 1
Quick Manual x 1
Quick Installation Guide x 1
Software CD x 1
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
6
Front Panel
Menu
Under the live viewing mode, press MENU to enter the main menu.
Under the menu mode, press MENU to go to the upper menu.
Manual Record/
STOP
Press this button to start recording in live mode.
Under the playback mode, press the button to stop the operation or
go to upper menu.
Step / Pause
Under the playback mode, press Step button to enter Play Frame
by Frame mode. Under the playback mode, press the button to
pause the playback.
Play
Under the live viewing mode, press the Play button to enter the
playback mode.
Slow Forward
Slow Forward speed: 1/2, 1/4, 1/8
Quad
8 Division Display
Under the live viewing mode Quad/8 Channel display. Under
playback mode Quad display.
1
Channel 1/5
Under the live viewing mode or playback channel 1/5 display.
2
Channel 2/6
Under the live viewing mode or playback channel 2/6 display.
3
Channel 3/7
Under the live viewing mode or playback channel 3/7 display.
4
Channel 4/8
Under the live viewing mode or playback channel 4/8 display.
USB 2.0 Port
USB backup or firmware update.
(There are a front and a back USB that can be used one at a time.)
Power Indicator
The LED lights on when power on.
Record Indicator
The LED lights on when the DVR is recording.
Play Indicator
The LED lights on when the DVR is playing.
Up
Down
To move up or down of the selection setting in the menu
Left
Fast Rewind
To move left of the selection setting in menu.
Playback: x2 / x4 / x8 / x16 / x32 Multiple Speed.
Right
Fast Forward
To move right of the selection setting in menu.
Playback: x2 / x4 / x8 / x16 / x32 Multiple Speed.
Enter
Press the Enter button to confirm the setup or go into sub-menu.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
7
2. Backplane
1
USB Mouse Port
2.0 USB Mouse
2
Video In
4/8CH Video Input (BNC)
3
Video Out
1CH Video Output (BNC)
4
Audio Out
1CH Audio Output (RCA)
5
Audio In
4CH Audio Input
6
Alarm
Alarm I/O 7 DC12V
Power Input 8 XGA
PC Monitor Output
9
LAN
RJ-45 Network Connection
10
RS-485
For Speed Dome Use
Alarm I/O
Item
Point 1: CH1 sensor input.
Point 2: CH2 sensor input.
Point 3: CH3 sensor input.
Point 4: CH4 sensor input.
Point 5: ground.
Point 6: the first relay joint port.
Point 7: the first relay normal open.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
8
3. DVR Installation
Connect the camera video output to the DVR video input port with BNC connectors.
The camera install coaxial cable is suggested RG59 or above.
DVR Network installation
Please connect DVR to HUB or router by using RJ-45 network cable and make sure
the DVR network indicator LED is on.
(Please refer to Network Setup for further network setting information of using static IP,
PPPoE or DHCP.)
Alarm Installation
Please refer to Installation for external alarm I/O installation. Please refer to Alarm
Setup.
Speed Dome Installation
This device can support 3 kinds of communication protocol (Pelco D, Pelco P &
MIKAMI)
Power Installation
Please use the provided power cable and adaptor to connect the DVR
(AC100V~AC240V). Please refer to Installation for connecting position. The DVR
system will enter into live viewing mode when power is connected. Please refer to
Display Setup - Live Viewing Mode for more information.
OSD switching between VGA and BNC is automatic.
If you found the monitor is working, but the front panel and USB
mouse are locked up.
Press and hold the “fast forward” button on the remote for 5 seconds
to switch OSD setting.
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
9
4. System Operation
There are 3 kinds of DVR control method: front panel, remote control and USB mouse.
USB Mouse Operation
1. Quick Menu: Right click the mouse button under the live viewing mode to go for
enter into Quick Menu.
2. Left click the mouse button under the main menu to go to the sub-select menu.
3. Left click the mouse button under the select menu to go to the sub-menu.
4. Use the mouse to change the setting.
5. Please refer to Display Setup - PTZ Setup.
Remote Control Operation
Remote Control and front panel operation are the same; please refer to Front Panel
and the reference table of the button as below.
On live mode, click “Fast Forward” to switch on the GUI display.
Virtual Keyboard Operation
CH2/CH6 display
Record
Menu
Navigator
Fast Forward
Stop/ Remote ID Setup
Step/Pause
CH1/CH5 display
CH3/CH7 display
CH4/CH8 display
Mute
Enter
Fast Rewind
Play
Quad/Split
Windows display
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
10
The text input of the virtual keyboard is as below:
Menu Operation
Front Panel & Remote
Control Operation
Mouse Operation
Select character from virtual keyboard
[Up/Down/Left/Right]
[Move Cursor]
Keyin the select character
[Enter]
[Left Click]
Exit the virtual keyboard
[MENU]
[Left Click]out of selection area
Key Description of Virtual Keyboard
Delete the previous character
Switch to text input
Enter key. Save and exit the virtual keyboard
Other Keys
Character Keyin
Main Menu Operation
Setup Operation
Front Panel & Remote Control
USB Mouse
Select
[Up/Down/Left/Right]
[Moving Cursor]
Enter Select Menu
[Enter]
[Left Click]
Setup Operation
Main menu
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
11
Setup Operation
Front Panel & Remote Control
USB Mouse
Select
[Up/Down/Left/Right]
[Moving Cursor]
Confirm Select Setting
[Enter]
[Left Click]
Change the Select Setting
[Left/Right]
[Left Click]
5. Display Setup
There are 3 kinds of screen display mode: Live, Auto Switching and PTZ. DVR.
Live Viewing Mode
The DVR will go to the live viewing mode after boot up. There are 5 different status icons:
Setup Operation
Front Panel&Remote Control
USB Mouse
Channel 1~4/8 Single Channel
Display
[CH1~4/8]
Select one of channel
[Double click left button]
4/8 Channel Split Display
[4/8 CH Split]
Under single channel
[Double click left button]
Quick Menu
[MENU]
[Right]
Playback Mode
[Play]
[Right] QuickMenu
Start/Stop the Manual Record
[Record]
[Right] QuickMenu
Start/Stop the Auto Switching
Front Panel
[Auto Switch]
Remote Control
[Auto Switch]
[Right] QuickMenu
Start/Stop Mute
Remote Control
[Mute]
[Left] Left Click
Quick Menu
●: Record
M: Motion Triggered
L: Video Loss
A: Alarm Triggered
: Sound on/off
Setup
Main Menu
Remote Lock
Search
PTZ
Manual REC
Zoom Mode
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
12
Setup Operation
Front Panel & Remote Control
USB Mouse
Select Item
[Left/Right]
[Moving Cursor]
Enter the Select Item
[Up/Down]
[Moving Cursor]
Confirm the Select Item
[Enter]
[Left Click]
Exit
[MENU]
[Left Click] out of selection area
PTZ
Please set the speed dome properly before control PTZ. Please refer to PTZ Setup.
Setup Operation
Front Panel & Remote Control
USB Mouse
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Enter Select Item
[Enter]
[Left Click]
Zoom +,-
Focus, +-
Iris, +-
Adjust Movement Speed
PTZ Up / Down / Left / Right
Start/Stop Auto Tracking
Exit
[Right click] or [Left click ]
Playback Operation
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
13
Setup Operation
Front Panel & Remote
Control
USB Mouse
Fast Rewind
[Fast Rewind]
Fast Forward
[Fast Forward]
Step Forward
[StepForward]
Step/Pause
[Step/Pause]
Play 1x
[Play] Stop
[Stop]
Digital Zoon
None
Drag by Left Click
Derived Image
None
[Left click]
1~4/8 Single Channel Display
[1~4/8 Channel]
Select Channel [Double left click]
4/8split Display
[4/8 split]
Under single channel
[Double left click]
Auto Switching
1. Auto switch starts from order CH1~CH8, 4/8 split channel.
2. Press the button again to stop the function.
6. Search
In Live mode, use Play button in the front panel/remote controller or right clicking the
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
14
mouse to switch to the Search function.
Setup Operation
Front Panel & Remote
Controller
USB Mouse
Search
[Enter]
[Left Click]
Select Channel
[Up/Down]
[Moving Cursor]
Select Dates
[Up/Down/Left/Right]
[Moving Cursor]
Playback
[Enter]
[Left Click]
Return to Upper Menu
[MENU]
[Right click] or [Left click ]
No data: no color, data of alarm trigger: red color, normal record data: green color.
Select the first half of hour frame under the date, the playback will start from 00 mins:
00 sec. Select the second half of hour frame under the date, the playback will start
from 30mins:00sec. If there is no data on the date, please try to search from record
list.
Select any of 4/8 channels to playback.
Record List
8CH DVR
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
15
Setup Operation
Front & Remote
Controller
USB Mouse
Enter Select Item
[Enter]
[Left Click]
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Return to Upper Menu
[MENU]
[Right click] or [Left click ]
First Page
Previous Page
Next Page
Last Page
Mark all the events in this page
BackUp
List all of recording data and click on one of record data to playback.
Backup
Please click “BACKUP” to backup the selecting file to USB memory stick.
7. Main Menu
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
16
Setup Operation
Front Panel & Remote
Controller
USB Mouse
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Enter Select Item
[Enter]
[Left Click]
Exit Main Menu
[MENU]
[Right click] or [Left click ]
8.1 Camera Setup
Channel
Select one channel to set. Use CopyButton to copy present settings to other channels.
Camera Title
Set the title of camera. Key in by using virtual keyboard.
Title Position
Set the title position. Set: Top Left, Top Right, Bottom Left, Bottom Right and Off.
Display
Display the channel, set: On/Off
Camera Color Setup
PTZ Setting
Camera
Record
Sensor
Motion
Network
Log Search
Back Up
System
Hue: 0~50
Brightness: 0~50
Contrast: 0~50
Saturation: 0~50
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
17
Type
Speed dome model type. Set: PTC-301, PTC-203ST, FUM 626, JG_QG988,
FUM 622SD, FUM 628 or off. Please select the correct communication
protocol if you enable this setting.
Protocol
Speed dome protocol. Set: PELCO P, PELCO D, MIKAMI or off.
Address
Speed dome address. Set: 0~255
Baud Rate
Speed dome baud rate. Set: 1200, 2400, 4800, 9600, 19200.
Tour Time
Speed dome tour time. Set: 5, 10, 15, 20, 25 sec or off.
Tilt Opposite
Set speed dome image upside down. Set: On/Off
Preset
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
18
Setup Operation
Front Panel &
Remote Controller
USB Mouse
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Enter Select Item
[Enter]
[Left Click]
Zoom +,-
Focus +,-
Iris +,-
Adjust Move Speed
Set PTZ Up/Down/Left/Right
Start/Stop Auto Tracking
Number Preset Setting
This function is preset 95 enter the menu
Save Preset Setting
Clear Preset Setting
Clear All Preset Setting
Return to Upper Menu
[Right click] or [Left click ]
Buzzer Duration
The buzzer ON duration when video loss.
Alarm Relay Duration
The Relay ON duration when video loss.
Time Display
Display the time in LIVE mode. Values: ON/OFF.
8.2 Record Setup
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
19
Record Enable Setup
On/Off the channel.
Watermark: Insert the words of watermark.
Resolution Setup
NTSC Recording Resolution: 720x480 / 720x240 / 360x240.
PAL Recording Resolution: 720x576 / 720x288 / 360x288.
Frame Rate Setup
Setting of Frame Rate: NTSC: 0-30 frames/sec; PAL: 0-25 frames/sec.
8CH DVR
8CH DVR
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
20
Quality Setup
Setting of recording quality: Values 1-5. The bigger value, the better quality.
Pre Record setting
Pre Recording time when motion alarm. Values: 0-10 seconds.
Audio
On/Off the sound effects.
Encode Mode
Encoding of channel. Values: VBR or CBR.
Record schedule setup
Always and Schedule Record.
Record Schedule
8CH DVR
8CH DVR
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
21
Setup Operation
Front Panel & Remote Controller
USB Mouse
Enter Select Item
[Enter]
[Left Click]
Select Channel
[Up/Down]
[Moving mouse wheel]
Select Time&Date
[Up/Down/Left/Right]
[Click/Drag-draw]
Return to Upper Menu
[MENU]
[Right Click] or [Left Click ]
Copy
(1) Select source (2) Select target (3) Press COPY icon to copy.
8.3 Alarm Setup
Channel
Select the channel to set. COPY icon can copy the present setting to other channels.
Mode
Enable/disable alarm trigger. Set: On/Off.
Record Duration
The duration of the recording after triggered: 10, 20… 60 sec.
Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30 sec.
Alarm Duration
Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.
Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20 sec or off.
8.4 Motion Detection
Schedule
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
22
Channel
Select the channel to set. COPY icon can copy the present setting to other channels.
Enable
Enable/disable motion detection for each camera. Set: On/Off
Sensitivity
Sensitivity level of motion detection. Set: 1~10. Higher value equal more sensitive.
Motion Area Setup
Setup by each small square.
Setup Operation
Front Panel & Remote Controller
USB Mouse
Area Selection
[Up/Down/Left/Right]
[Moving Cursor]
Set Detection Area: must set
on none detection
area(Transparent Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Clear Detection Area: clear the
set detection area: must set on
detection area(Green Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Return to Upper Menu
[MENU]
[Right Click]
Record Duration
The duration of the recording after triggered: 10, 20… 60 sec. or off.
Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30 sec.
Alarm Duration
Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.
Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20 sec or off.
8.5 Network Setup
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
23
Mode
Set the connection method. Set: Static IP, DHCP, PPPoE.
Media Port
Port used for stream media. Default is port 9000.WEB Port
Port used for web access. Default is port 80.
Command Port
Port used for settings. Default is port 8000.
Mobile Port
Mobile phone port (factory default): 15961.
IP Address
Assigned IP address.
Netmask
Assigned net mask
Gateway
Assigned gateway
PPPOE/3G
PPPoE: Need account and password for PPPoE.
3G: Need account, password, APN and dial number for 3G.
DDNS setting
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
24
DNS1 First Domain Name Server, Default : 168.95.1.1
DNS2 Second Domain Name Server, Default :168.95.192.1
DDNS
Enable/disable Dynamic Domain Name server. Values: On, Off.
DDNS Server
DDNS Server, Values: 3322, dyndns, cctvdvr.
When using DDNSserver, server name and account/password are required.
E-Mail Setting
E-MAIL
Forward E-mail after alarm triggered. Enable: On/Off
SSL
Enable the SSL encryption. Recommend to set on if it is using gmail.
Port
SMTP port number key in. For example, gmail port 465.
Server
SMTP server key in. For example, gmail: smtp.gmail.com
Password
Sender E-mail account password
From
Sender E-mail address key in. For example,
gmail: mail1@gmail.com
To
Receiver E-mail address key in. For example,
gmail: mail2@gmail.com
Interval
When alarm keeps going, the time span to send E-mail. Values: 10, 30, 60
seconds.
8.6 Log Search
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
25
Log type
Set conditions for searching: type and time range. Log type can be ALL, Alarm,
Operation, Motion Detection, and Video Loss.
Start/End time
Set the search range (Year/Month/Day). Press [SEARCH] to search.
Setup Operation
Front & Remote Controller
USB Mouse
Enter Select Item
[Enter]
[Left Click]
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Return to Upper Menu
[MENU]
[Right click] or [Left click ]
First Page
Previous Page
Next Page
Last Page
Backup to USB disk
★ When Trigger Recording is marked, click to playback.
8.7 Backup
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
26
Channel
Backup all channels or single channel 1-4/8.
Record Type
Select all, normal or alarm.
Start/End time
Select the backup range of time. Press Search to start searching. The record list will
be shown if available and follow [Record list] to backup.
Storage Device Choose
8.8 System
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
27
8.8.1 Time Setting
Date/Time
Select by using virtual keyboard.
Date Format Setup
Set: YY/MM/DD, MM/DD/YY.
Time Format Setup
Set: 24Hours, 12Hours.
Time Zone Setup
Time Zone setting of DVR.
NTP Setting（Network Time Protocol）
NTP: On or Off
Schedule Time: Using virtual keyboard
NTP server: Using virtual keyboard
8.8.2 HDD Setup
Format
Format the selected HDD
Time Setup
HDD
Display
System Information
Password
Language
Audio
System Maintenance
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
28
Format HDD
Overwrite
Enable/Disable Overwrite, Values: On/Off.
If Overwrite is enabled, the period can be set as 6, 12, 24, 36, 48, 72 hours
and 7, 15, 30, 60 days.
Pack Time
Set the required packing time frame to allow the system to pack each saving
file under continue recording mode. Pack time setting: 5 min, 10min, 15min,
20min, 30min, and 60min.
HDD Error Buzzer Enable
When the hard drive does not have enough space or something wrong, set
the buzzer on. Values: On/Off.
HDD Error Alarm Enable
When the hard drive does not have enough space or something wrong,
trigger the alarm. Values: On/Off.
USB Disk Info
Format USB Memory Stick
8.8.3 Display Setting
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001 User Manual
29
GUI Display
GUI display mode can be VIDEO or VGA.
Video Switching Time
Set the switching time when switching channels in video mode. Values: 1-99
seconds. (0 sec is Off)
VGA Switching Time
Set the switching time when switching channels in VGA mode. Values: 1-99
seconds. (0 sec is Off)
Switching Sequence
Set the switching sequence of channels.
Video Margin
Set the display margins of the screen. They are Left, Right, Top and Bottom
with range between 0 - 36.
XGA Resolution
XGA Resolution: 800x600, 1024x768, 1280x1024, 1440x900.
8.8.4 System Information
Provide the firmware version, MAC address, HDD status….
8CH DVR
Loading...