Elegant Webcam 2.0Mega Pixel Built-in MIC W/UVC
RCM-2655V
User Manual
Contents
Introduction……………………………………………...2
System Requirements for Device…………………..…2
Package Contents………………………………….…..3
PC Camera Introduction…………………………….…3
Set up PC Camera……………………………….…….4
Software Installation
ArcSoft WebCam Companion 3.0………………….5
ArcSoft Magic-i……………………………………….7
Snapshot by ArcSoft WebCam Companion 3.0….....9
Camera Specification…….………………………..….10
1
Introduction
Welcome to the world of digital imaging. The following information will
help you to use your camera to its full capabilities.
For viewing pictures or video, camera must be connected to your
personal computer.
This camera is support Microsoft Video Class and plug & play
directly without driver.
System Requirements for Device
Pentium® P4 1.2G CPU
Free USB2.0 port
256MB RAM internal memory minimum
500MB free hard disk space
Internet connection
CD-ROM drive
Windows compatible sound card and speakers
Windows® XP Service Pack II
Windows Vista™ / Windows 7
Note:
1. If your system is Windows XP Service Pack I, please go to
www.microsoft.com . It’s free to update your system to
Windows XP Service Pack II.
2. System requirement required by webcam only.
3. Before using WCC3, please make sure you have Media Player
V.9 or above.
2
Package Contents
PC camera CD-disc User Manual
PC Camera Introduction
3
Set up PC camera
You may mount the PC camera to your laptop or stand on the desk.
Plug the PC camera into the USB port of PC or laptop properly.
4
Software Installation
ArcSoft WebCam Companion 3.0
1. Turn on the computer and insert
CD installation Disc into your
CD-ROM drive. Select and click
“ArcSoft WebCam Companion 3.0”
2. Choose Setup Language
3. Click “Next”
4. Click “Yes”
5
5. Click “Next”
6. Click “Next”
7. Click “Finish”
6
Software Installation
ArcSoft Magic-i
1. Turn on the computer and insert
CD installation Disc into your
CD-ROM drive. Select and click
“ArcSoft Magic-i”
2. Choose Setup Language
3. Click “Next”
4. Click “Yes”
7
5. Click “Next”
6. Click “Next”
7. Click “Finish”
8
Snapshot by ArcSoft WebCam Companion 3.0
1. Click on the “WebCompanion 3.0” icon
on the desktop.
2. Click “Capture”
3. Click “Capture” for capture image
and the picture is saved.
4. Click “Record Video” for
recording.
Note:
The Snapshot button and its featuring functions are not supported
under Windows Vista and Win7. To access this function, please
use the bundled software -ArcSoft Webcam Companion 3.0
9
Camera Specification
Image Sensor 1600x1200 pixels, CMOS
Lens Specification
White Balance
Exposure
Frame Rate
Focus Range
Depth of Field
PC Interface
Video Format
Audio
Video Capture Res.
System Requirements
Snapshot
Still Capture Res.
Power
Bundled Software
Specifications are subject to change without prior notice.
F2.8, f=4.8mm, Fixed Focus Lens
Auto
Auto
1600 x 1200 pixels @ 1~5fps
1280 x 960 pixels @ 5~9fps
800 x 600 pixels @ 15~20fps
640 x 480 pixels @ 25~30fps
Fixed focus, 30cm to infinity
50cm to 100cm
USB2.0
WMV
Built-in microphone
640x480/ 352x288 pixels
Support Microsoft Video Class
Win XP Service Pack II above
Without driver
By software
Up to 8M pixels
(by WCC3 interpolation)
From USB port
ArcSoft WebCompanion 3.0
ArcSoft Magic-i
10
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete
warranty information and future support for your product.
This symbol on the product or in the nstructions
means that your electrical and electronic
equipment should be disposed at the end of its
life separately from your household waste.
There are separate collection systems for
recycling in the EU. For more information,
please contact the local authority or your
retailer where you purchased the product.
11
Loading...