Rosewill RC604 User Manual

2 Port eSATA PCMCIA Card RC604

User Manual

2 Port eSATA PCMCIA Card RC604 User Manual

Features and Benefits

z Silicon Image SiI 3512 chipset
z Compliant with Serial ATA Specifications rev. 1.0
z PCMCIA CardBus Interface with Power Management
z Provides two independent channels to support to two Serial ATA drives
z Support Serial ATA data transfer rates up to 150MB/sec
z Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard disk drives

Bus Interface

z 32-bit PCMCIA Type II

Connectors

z 2 x external eSATA connectors

Package Contents

z 1 x Serial ATA CardBus Adapter
z 1 x Manual
z 1 x Driver CD

System Requirements

z Windows 98SE/ ME/2000/XP 32/64, Vista 32/64 & Linux

z Available CardBus Type II Slot

Hardware Installation

General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for

further information, if needed.

1. Power off your notebook computer.

2. Insert the Serial ATA CardBus Adapter into the Type II PC Card slot of your notebook computer. Make sure it is inserted all the way in for a

solid connection.

3. Power on your notebook computer.

Driver Installation

For Windows® 2000

1. At Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device(recommend) then click Next.

3. Insert the driver CD, check CD-ROM drives, uncheck the other boxes, click Next, then click Next again.

4. If the Digital Signature Not Found message appears, click Yes . Our driver has been thoroughly tested for stability and compatibility.

5. Click Finish.

For Windows® XP