10/100/1000Mpbs PCIe LAN Card
RC-401-Dual-EX
User Manual
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty
information and future support for your product.
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual
1. Introduction
This PCI Express Host Adapter can upgrade your desktop or Notebook computer to have Two RJ-45
Port and support Gigabit Ethernet 10Mbps (half-duplex), Ethernet 20Mbps (full-duplex), Fast Ethernet
100Mbps (half-duplex), Fast Ethernet 200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex) and
Gigabit 2000Mbps (full-duplex) transfer rate
It comes with drivers for Windows.
1.1. Features
• RSS Hash Calculation and QoS (IEEE 802.1p) support for client and server application
• Fully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE 802.3u (100Base-TX Fast Ethernet),
IEEE 802.3z (1000Base-T Gigabit Ethernet)
• Compliant with PCI Express Specification, revision 1.0a
• 4-lane 10Gbps PCI Express host interface
• Low Profile PCI Form Factor
• Supports Ethernet 10Mbps (half-duplex), Ethernet 20Mbps (full-duplex), Fast Ethernet
100Mbps (half-duplex), Fast Ethernet 200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex)
and Gigabit 2000Mbps (full-duplex)
• RJ-45 Port offer high speed transmission over CAT 5 UTP cable
• 2 LEDs per port to indicate for various network activities (1000 and LNK/ACT)
• Configurable 96 KB deep buffer for each link
• Jumbo Frame Buffer
• Automatic MDI / MDIX Crossover at all speeds
• IP, TCP, UDP Checksum Offload and TCP segmentation offload / large-send support
• Supports Full Duplex flow control (IEEE 802.3x)
• Supports IEEE 802.1Q VLAN insertion and removal
• Descriptor Bursting and caching
• Interrupt Moderation
• Wake On Lane Power Management support
• SMBus V2.0 compliant
• Supports Mac OS X, Windows XP, 2000, 2003, Linux
• Includes 2 Brackets (Low profile PCI and Regular size PCI Brackets)
• Fully RoHS compliant
1.2. Package Contents
• RC-401-Dual-EX
• User’s Manual & Driver CD
• Low Profile Bracket2. Software Installation
1
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual
2.1. Windows Driver installation
This Driver support Windows 2000, Windows XP 32bit/64bit, Windows Server 2003
32bit/64bit.
On plug & play Windows versions, the adapter is found, identified, and configured automatically.
Cancel all operating system attempts to install the driver automatically.
NOTE:
To install the driver, you have to be logged in as a user with administrative rights.
To install the driver, proceed as follows:
1. Make sure Driver CD is in your ODD drive, and locate the driver in the following
location (X:\ means your ODD drive)
X:\1000_GigaNet\Marvell_Yukon\Windows\
and execute the setup file "setup.exe"
2. Follow the instructions displayed during the
installation procedure.
2.2. Verifying The installation
To verifying the instructions, you need to follow the instructions in this section.
1. Right click on “My Computer” icon, select ”Properties”, left click on ”Hardware” tab,
and then on ”Device Manager” button.
2. Double click on ”Network adapters”, If there is no yellow ”! ” or ”? ” in front of ”Marvell
Yukon 88E8062 PCI-E IPMI Gigabit Ethernet Controller ” the driver has started correctly.
2