Rosewill RC-401 User Manual

PCI-E Gigabit Ethernet Adapter RC401

User Manual

PCI-E Gigabit Ethernet Adapter RC401

Key Features

• Media Access Controller(MAC):

- 10/100/1000 Mbits/s triple-speed operation

- Compatible with IEEE® 802.3, 802.3u, 802.3x, 802.3ac, 802.1q, and VLAN

- IEEE 802.3x frame-based flow control

- PXE 2.0 support

- Wake on LAN

• PCI Express Revision 1.0a Interface:

- Full compliance with Revision 1.0a

- Single-lane, 2.5 Gbits/s full-duplex channel

- Multiple traffic classes support

- Advanced error reporting

- 64-bit and 32-bit platform support

User Manual

- End-to-end CRC(ECRC) support

• Agere TruePHY technology

- 10Base-T/100Base-TX/1000Base-T gigabit Ethernet copper transceiver

- Automatic speed negotiation and downshift

• Software:

- Windows® 2000, Windows® XP device drivers

Package Contents

• 1 x Gigabit Ethernet Adapter

• 1 x User Manual

• 1x Driver CD

Driver Installation

1. After the hardware is installed, turn on your PC. Windows® will detect the ET1310 Gigabit

Ethernet Card and find a “Ethernet Controller” device. When Windows® asks “What do

you want the wizard to do?”, click the “Cancel” to cancel the driver installation for this

device. This driver will be installed from the included Driver CD.

2. Insert the Driver CD into the CD-ROM drive of your computer.

Browse to the ET1310 Driver Folder “\LAN\ET1310\Windows” on the Driver CD, then

double-click the installation file “Setup.exe”. Follow the on-screen instructions to finish the

driver installation.

Thank you for purchasing Rosewill Product.

Please register your product at www.rosewill.com for complete warranty information and future

support for your product.

1