Rosewill RC304-E User Manual

2 ports Parallel PCIe Card RC304-E

User Manual

2 ports Parallel PCIe Card RC304-E User Manual

Features and Benefits

z Compliant with PCI Express Base Specificati on 1.0a
z Supports Standard Parallel Port(SPP), Enhanced Parallel Port(EPP) & Enhanced Capability Port(ECP)
z Data transfer rate up to 1.5MB/Sec
z PCI-Express X1
z 2 x 25 pins parallel connectors

Package Contents

z PCIe Parallel Card 2 Ports
z Driver CD
z User Manual

System Requirements

z Windows® 2000/XP/Server 2003
z PCI Express-enabled system with an available PCI Express slot

Hardware Installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCIe slot.

4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the

board down firmly.

5. Connect the system power source to the board’s power connector.

6. Replace the slot bracket’s holding screw to secure the card.

Replace the computer cover and reconnect the power cord.

Driver Installation

Please make sure the boar d is installed before proceeding with driver installation.

For Windows® 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device(recommended), and click Next.

3